Differences

This shows you the differences between two versions of the page.

--- admin-sched [2022/01/07 08:47] – rs232
+++ admin-sched [2022/01/13 00:52] – hogwild
@@ Line 1: / Line 1: @@
-===== Scheduler ======
+===== Scheduler =====
-The scheduler page allows you to perform periodic tasks. The GUI is a frontend for the system command cru which is a reduced busybox version of Linux's full crontab command.
+The scheduler menu allows you to schedule tasks to perform periodically. The web interface is a frontend for the //cru// system command, which is a minimal busybox version of Linux's full crontab command.
+ \\
-Reboot -\\
+**Reboot**\\ {{:pasted:20220107-084024.png}}\\  The reboot function allows you to schedule a periodic reboot of the device.\\
-{{:pasted:20220107-084024.png}}\\
-The reboot paragraph allows you to plan a periodic reboot of the device.\\
+ \\
-Reconnect -\\
+**Reconnect**\\ {{:pasted:20220107-084345.png}}\\  Here, you can schedule a WAN reconnection.\\
-{{:pasted:20220107-084345.png}}\\
-With a similar interface to Reboot you can schedule here a WAN reconnection.\\
+ \\
+**Custom x**\\ {{:pasted:20220107-084257.png}}\\
+The following 5 Custom fields allow you to run custom commands based on your needs. If the commands called are not in the $PATH (''echo $PATH'' and ''which yourcommand'' to verify), ensure you specify their full filesystem location.
+ \\
+ \\
-Custom x -\\
-{{:pasted:20220107-084257.png}}\\
-The following 5 paragraphs allow you to run custom commands based on your needs. If the commands called are not in the $PATH (''echo $PATH'' and ''which yourcommand'' to verify), make sure to provide their full filesystem location.\\

FreshTomato Wiki

User Tools

Site Tools

Differences

Page Tools