Differences

This shows you the differences between two versions of the page.

--- advanced-pbr [2022/01/31 22:55] – clarity, grammar hogwild
+++ advanced-pbr [2022/01/31 23:16] – hogwild
@@ Line 5: / Line 5: @@
  \\
-{{:pasted:20220126-181958.png}}\\
+{{:pasted:20220126-181958.png}}\\  \\
 **On**: When enabled, makes the routing rule on that line of the table active.
@@ Line 11: / Line 11: @@
 **Protocol**:
-  * All Protocols
+  * All Protocols * (Default).
   * TCP+UDP
   * TCP
@@ Line 17: / Line 17: @@
   * ICMP
-Here you can choose the transport protocols that should be matched by the rule. Note that there are hundreds of layer 4 protocols. This menu and this setting refer only to the most common ones.
+This dropdown lets you choose the transport protocols that should be matched by the rule. Note that there are hundreds of layer 4 protocols. This menu and this setting refer to only the most common ones.
 **Source Address**:
@@ Line 29: / Line 29: @@
 **Destination Address**:
-All
+  * All
+  * IP
-IP
+  * Domain
-Domain
 Similar to the source IP, the destination address makes the rule more restrictive based on/or destination address. This can be defined as ALL (as in Internet), IP address or set of addresses, defined in a netmask format or even a destination domain.
-**Selected WAN**: WANx - Specfies the logical interface where the defined traffic should be sent outbound.
+**Selected WAN**: WANx - Specfies the logical interface where the defined traffic should be directed outbound.
-**Description**: In this free text field, you can enter notes to make management easier.\\
+**Description**: This is a free text field, in which you can enter any notes you choose to make management easier.\\
 Please note that the rules defined will take precedence over any WAN's weight-related setting.\\

FreshTomato Wiki

User Tools

Site Tools

Differences

Page Tools