FreshTomato Wiki

User Tools

Site Tools

Trace:
advanced-pbr

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
Last revisionBoth sides next revision
advanced-pbr [2022/01/31 23:37] – grammar hogwildadvanced-pbr [2023/06/05 03:19] – [Rules] -formatting hogwild
Line 1: Line 1:
 ===== MultiWan Routing ===== ===== MultiWan Routing =====
  
-While similar to the Routing menu, the MultiWAN Routing menu allows you to direct outbound traffic in multiwan scenarios. On this menu, you can define advanced parameters to make a connection bind to a specific WAN. Where outbound traffic is directed will implicitly affect the corresponding (inbound) return traffic. A packet going to WAN0 is expected to return only via the same interface.+While somewhat similar to the Routing menu, the MultiWAN Routing menu allows you to direct outbound traffic in multiwan scenarios.
  
- \\+This menu lets you define advanced parameters to make a connection bind to a specific WAN. Where outbound traffic is directed will implicitly affect the corresponding (inbound) return traffic. A packet going to WAN0 should return only via the same interface. 
 + 
 + 
 +===== Rules =====
  
 {{:pasted:20220126-181958.png}}\\  \\ {{:pasted:20220126-181958.png}}\\  \\
  
-**On**: When enabled, makes active the routing rule on that line of the table.+**On**: When checked, this enables the routing rule on that line of the table.
  
-**Protocol**:+**Protocol**:  This lets you choose the transport protocols that will be matched by the rule. There are hundreds of layer 4 protocols. This menu and setting refer to only the most common ones.
  
   * All Protocols * (Default).   * All Protocols * (Default).
Line 17: Line 20:
   * ICMP   * ICMP
  
-This dropdown lets you choose the transport protocols that should be matched by the rule. Note that there are hundreds of layer 4 protocols. This menu and this setting refer to only the most common ones. +**Source Address**:  Filters in the defined source of traffic. All filters in all LAN devices. The IP setting allows you to define a specific IP address or set of addresses using a netmask syntax (e.g. 192.168.1.0/24), where MAC binds the rule to a defined MAC Address only.
- +
-**Source Address**:+
  
   * All   * All
Line 25: Line 26:
   * MAC   * MAC
  
-Filters in the defined source of traffic. All filters in all LAN devices. The IP setting allows you to define a specific IP address or set of addresses using a netmask syntax (e.g. 192.168.1.0/24), where MAC binds the rule to a defined MAC address only. +**Destination Address**:  Similar to the source IP, the destination address makes the rule more restrictive based on/or destination address. This can be defined as ALL (as in Internet), IP address or set of addresses, defined in a netmask format or even a destination domain.
- +
-**Destination Address**:+
  
   * All   * All
Line 33: Line 32:
   * Domain   * Domain
  
-Similar to the source IP, the destination address makes the rule more restrictive based on/or destination address. This can be defined as ALL (as in Internet), IP address or set of addresses, defined in a netmask format or even a destination domain.+**Select WAN**:  (WANx) - Here, you choose the logical interface where the defined outbound traffic will be directed.
  
-**Selected WAN**: WANx - Specfies the logical interface where the defined outbound traffic should be directed.+**Description**: In this field, you can enter any notes you wish to make management easier.\\
  
-**Description**: This is a free text field, in which you can enter any notes you choose to make management easier.\\+Rules defined will take precedence over any WAN's weight-related setting. 
 + 
 + \\
  
-Please note that the rules defined will take precedence over any WAN's weight-related setting.\\+ \\ \\
  
  
advanced-pbr.txt · Last modified: 2023/06/10 17:27 by hogwild

Page Tools

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki