Differences

This shows you the differences between two versions of the page.

--- advanced-routing [2022/01/10 19:19] – rs232
+++ advanced-routing [2023/06/24 19:46] (current) – hogwild
@@ Line 1: / Line 1: @@
 ===== Routing =====
-The Routing page allows you to define the output interface for specific destination (IP and Subnets).
+The Routing page allows you to view the current routing table. It also allows you to define the output interface for specific routing destinations (both IP addresses and Subnets).
-{{:pasted:20220110-191350.png}}\\
+ \\
-The Current Routing Table is displaying the output of the system command ''route''. Please note a default reference should be present and indicated the traffic towards Internet.\\
+{{:pasted:20220110-191350.png}}
+ \\
+The Current Routing Table displays the output from the ''route'' system command.
+A default table entry should be present that indicates traffic going towards the Internet.\\  \\
+ \\
+{{:pasted:20220110-191557.png}}
+ \\ The Static Routing Table is manually created. Here, you can define static routes (with their netmask/gateway) towards specific destinations. While not commonly needed on simple networks, this may be useful for advanced setups such as intranets, VPNs, and others.\\  \\
+ \\
+{{:pasted:20220110-191807.png}}
+ \\
+If the WAN interface is assigned an IP address via DHCP, this option specifies whether to accept routing information from the DHCP server. Such information is usually sent via DHCP option 33 or 121.
+ \\ On older FreshTomato versions, there was an obsolete setting in this menu that suggested FreshTomato can operate in Gateway mode or Router mode. Ignore this, and leave it set to "Gateway", regardless of your configuration.
+ \\
+[[https://wiki.freshtomato.org/lib/exe/detail.php?id=basic&media=a16bb07aecd3c3d8967615c6fef64760.png|{{:a16bb07aecd3c3d8967615c6fef64760.png}}]]
+ \\
+ \\ \\
-{{:pasted:20220110-191557.png}}\\
-The Static Routing Table which created by human interaction, is where you would define static routes (with their netmask and gateway) towards specific destination. Please note this is normally not needed but it might be handy for advanced setups like intra-site VPN, etc.\\
-{{:pasted:20220110-191807.png}}\\
-In case the WAN interface is obtaining IP information via DHCP, with this option we can control whether to accept routing information (usually sent as a DHCP option 33) from the DHCP server or not.

FreshTomato Wiki

User Tools

Site Tools

Differences

Page Tools