Site Tools


advanced-routing

This is an old revision of the document!


Routing

The Routing page allows you to define the output interface for specific destination (IP and Subnets).


The Current Routing Table is displaying the output of the system command route. Please note a default reference should be present and indicated the traffic towards Internet.


The Static Routing Table is created by human interaction/configuration. This is where you would define static routes (with their netmask and gateway) towards specific destination. Please note this is normally not needed but it might be handy for advanced setups like intra-site VPN, etc.


In case the WAN interface is obtaining IP information via DHCP, with this option we can control whether to accept routing information (usually sent as a DHCP option 33 or 121) from the DHCP server or not.

advanced-routing.1641842580.txt.gz · Last modified: 2022/01/10 19:23 by rs232