Differences

This shows you the differences between two versions of the page.

--- advanced-vlan [2022/01/11 20:21] – [VLAN Wireless] hogwild
+++ advanced-vlan [2022/01/11 20:40] – [VLAN Notes] hogwild
@@ Line 21: / Line 21: @@
 The following settings are also mandatory:
-  * One VID must be assigned to WAN.
+  * One VID must be assigned to the WAN interface.
   * One VID must be selected as the default.
-  * To prevent 802.1Q compatibility issues, avoid using VID "0" , as 802.1Q specifies that frames with a tag of "0" do not belong to any VLAN (the tag contains only user priority information).  \\ [[https://en.wikipedia.org/wiki/IEEE_802.1Q|Wikipedia: 802.11Q]]
+  * To prevent 802.1Q compatibility issues, avoid using VID: "0" . 802.1Q specifies that frames with tag: "0" do not belong to any VLAN (the tag contains only user priority details).  \\ [[https://en.wikipedia.org/wiki/IEEE_802.1Q|Wikipedia: 802.11Q]]
-  * Avoid using VID "1" , as some vendors label it as "special" or "reserved" for management purposes.
+  * Avoid using VID: "1" . Some vendors label it as "special" or "reserved" for management purposes.
-\\
- \\ **Configuration example for German Telekom ISP**
+\\   \\ **Configuration example for German Telekom ISP**
 Europe's biggest telecom company supports a dual-stack setup (IPv4 & IPv6). For the WAN Port a VLAN tag is required with a value of 7 (VID 7).
 {{:telekom_example_vid_7.png?600}}
 ===== VLAN Notes =====
-For VLANs to function properly, please** use FreshTomato 2021.8 or newer**. All older versions, (including Shibby/Toastman/AdvancedTomato) may not work as expected.
+As mentioned above, for VLANs to function properly, please** use FreshTomato 2021.8 or newer**. All older versions, (including Shibby/Toastman/AdvancedTomato) may not work as expected.
+=== PPPoE Connections ===
+PPPoE connections work only when the following workaround is implemented:
-PPPoE connectios only work using the following workaround:
+//Example 1//: You are using FreshTomato 2021.7 to connect to German Telekom ISP. \\ German Telekom uses PPPoE with VID: "7". \\  => you must use VLAN: "7" using VID: "7"  (a "traditional" VLAN/VID mapping).
-//Example 1//: You are using FreshTomato 2021.7 to connect to German Telekom ISP. This uses PPPoE with VID 7. => you must use VLAN "7" using VID "7"  (a "traditional" VLAN/VID mapping).
+ \\ //Example 2//: You are using FreshTomato 2021.7 to connect to Freedom internet. \\ Freedom uses PPPoE , and VLAN: "6" using VID: "6"\\ See:  [[https://www.linksysinfo.org/index.php?threads/fork-freshtomato-arm-development-discussion-only-for-support-always-open-your-own-thread.74117/page-245#post-330148]]
-//Example 2//: You are using FreshTomato 2021.7 to connect to Freedom internet. Freedom uses PPPoE , only possible with VLAN 6 using VID 6) see [[https://www.linksysinfo.org/index.php?threads/fork-freshtomato-arm-development-discussion-only-for-support-always-open-your-own-thread.74117/page-245#post-330148]]
+ \\
-(//Example 3//: If you are using FT 2021.7 to connect to Vivo FTTH (Brazil) (needs PPPoE, only possible with VLAN 10 using VID 10) see [[https://www.linksysinfo.org/index.php?threads/fresh-tomato-r7000-vlan-issue-on-ftth-provider.76958/#post-330955]]
+//Example 3//: You are using FT 2021.7 to connect to Vivo FTTH (Brazil). \\ (Vivo use PPPoE, and VLAN: "10" using VID: "10") \\ see [[https://www.linksysinfo.org/index.php?threads/fresh-tomato-r7000-vlan-issue-on-ftth-provider.76958/#post-330955]]
-**Starting with release 2021.8**, you can select or use any VLAN 0 to 15 (see picture above for example 1 (Telekom ISP), now using VLAN 5 with VID 7)
+Starting with release 2021.8, you can select or use any VLAN 0 to 15 (see picture above for example 1 (Telekom ISP), now using VLAN 5 with VID 7)

FreshTomato Wiki

User Tools

Site Tools

Differences

Page Tools