This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
advanced-vlan [2022/01/11 20:06] – [VLAN Wireless] hogwild | advanced-vlan [2022/01/14 08:37] (current) – [VLAN Notes] m_ars | ||
---|---|---|---|
Line 1: | Line 1: | ||
====== VLAN (IEEE 802.1Q) ====== | ====== VLAN (IEEE 802.1Q) ====== | ||
- | FreshTomato supports VLAN (Virtual LAN) configurations. The user can create up to 16 VLANs. A VLAN can use a VID between 1 and 4094. \\ Please use FreshTomato 2021.8 and newer to make VLANs work properly on ALL ARM and MIPS router. (See examples below.) | + | FreshTomato supports VLAN (Virtual LAN) configurations |
===== VLAN Ethernet (Basic Configuration Information) ===== | ===== VLAN Ethernet (Basic Configuration Information) ===== | ||
Line 17: | Line 18: | ||
This section contains the assignments of wireless interfaces to various LAN bridges. | This section contains the assignments of wireless interfaces to various LAN bridges. | ||
- | It is recommended that you determine and/or verify correct settings on the [[: | + | It is highly |
- | Other mandatory | + | The following |
- | * One VID must be assigned to WAN. | + | * One VID must be assigned to the WAN interface. |
* One VID must be selected as the default. | * One VID must be selected as the default. | ||
- | * To prevent 802.1Q compatibility issues, avoid using VID " | + | * To prevent 802.1Q compatibility issues, avoid using VID: " |
+ | * Avoid using VID: " | ||
- | Avoid using VID " | + | \\ \\ **Configuration example |
- | \\ | + | Europe' |
- | **Configuration example for German Telekom ISP** | + | {{: |
- | Europe' | ||
- | {{: | + | ===== VLAN Notes ===== |
- | **IMPORTANT NOTE: | + | As mentioned above, for VLANs to function properly, please** use FreshTomato 2021.8 or newer**. All older versions, (including Shibby/ |
- | All older versions (including Shibby/ | + | === PPPoE Connections with FreshTomato 2021.7 and older === |
- | PPPoE connection | + | PPPoE connections work only when the following workaround |
- | | + | //Example 1//: You are using FreshTomato |
- | Example 2: If you are using FT 2021.7 to connect to Freedom internet | + | \\ //Example 2//: You are using FreshTomato |
+ | |||
+ | \\ | ||
- | Example 3: If you are using FT 2021.7 to connect to Vivo FTTH (Brazil) (needs PPPoE, | + | //Example 3//: You are using FT 2021.7 to connect to Vivo FTTH (Brazil). \\ (Vivo use PPPoE, |
- | **Starting with release 2021.8**, you can select or use any VLAN 0 to 15 (see picture above for example 1 (Telekom ISP), now using VLAN 5 with VID 7) | + | Starting with release 2021.8, you can select or use any VLAN 0 to 15 (see picture above for example 1 (Telekom ISP), now using VLAN 5 with VID 7) |