Differences

This shows you the differences between two versions of the page.

--- advanced-wireless [2023/05/10 03:46] – [Interference Mitigation] -added WLAN Auto with Noise Reduction. TBD hogwild
+++ advanced-wireless [2023/08/06 17:06] – [Interference Mitigation] -condense, formatting hogwild
@@ Line 1: / Line 1: @@
 ====== Advanced Wireless ======
-The Advanced Wireless menu contains settings for advanced tuning of WiFi interfaces. Changing these settings from the defaults is not recommended unless you are experienced with advanced WiFi settings. All default settings in the dropdown menus on this page are noted with an asterisk (*). For basic WiFi settings, see the wiki page for the [[network|Network]] menu. \\
+The Advanced Wireless menu contains settings for advanced tuning of WiFi interfaces. Changing these settings from the defaults is not recommended unless you are experienced with advanced WiFi settings. All default settings in the dropdown menus on this page are noted with an asterisk (*). For basic WiFi settings, see the wiki page for the [[basic-network|Network]] menu. \\   \\  {{:pasted:20220309-082430.png}} \\   \\
- \\
-{{:pasted:20220309-082430.png}} \\
- \\
 ==== Afterburner ====
@@ Line 112: / Line 110: @@
   * US / 0 - Country: US (USA) AND Country Rev: 0 (Asus default setup for USA and SDK6 router RT-AC68U A1/A2)
   * US / 0 - Country: US (USA) AND Country Rev: 0 (Asus default setup for Canada and SDK6 router RT-AC68U A2 - Bought in: Canada)
+  * US / 10 - Country: US (USA) AND Country Rev: 10 (Asus default setup for USA and SDK6 router RT-AC56U - Bought in: USA [CFE: 1.0.2.7])
   * Q2 / 33 - Country: Q2 (USA) AND Country Rev: 33 (Asus default setup for USA and SDK6 router RT-AC68U C1)
   * Q2 / 40 - Country: Q2 (USA) AND Country Rev: 40 (Asus default setup for USA and SDK6 router RT-AC68U B1/B2)
@@ Line 387: / Line 386: @@
 ==== Interference Mitigation ====
-This sets the Wireless Interference Mitigation mode. This option is only available wireless chipsets/interfaces that do NOT support 802.11ac. For chipsets that support 802.11ac, please see the section titled "AC-PHY Interference Mitigation".
+This sets the Wireless Interference Mitigation mode. This option is only available wireless chipsets/interfaces that do NOT support 802.11ac. For chipsets that support 802.11ac, please see the section titled "//AC-PHY Interference Mitigation//".
   * None * (default)
@@ Line 394: / Line 393: @@
   * WLAN Auto
   * WLAN Auto with Noise Reduction
+ \\
 **None:** This setting is recommended if there are no other "nearby" electronic devices that may cause interference.
-**Non-WLAN:** Use this setting if the primary source of interference in your area are non-Wireless LAN devices, such as cordless phones, microwaves and so on.
+**Non-WLAN:** Use this if the primary source of interference in your area are non-Wireless LAN devices, such as cordless phones, microwaves and so on.
 **WLAN Manual:** This activates interference mitigation against other Wireless LAN Access Points.
-**WLAN Auto:** This is similar to WLAN Manual, but activates mitigation only if FreshTomato detects other wireless APs transmitting at the time. The //WLAN Auto// selection seems to work better in most cases, but consider disabling the mitigation if you experience wireless stability issues. Caution is advised before using this feature. It has been responsible for instability and poor throughput.
+**WLAN Auto:** This is similar to WLAN Manual, but activates mitigation only if FreshTomato detects other WiFi APs transmitting at the time. This seems to work better in most cases, but consider disabling mitigation if you experience WiFi stability issues. Use caution when consdering this feature. It has been known to cause instability and poor throughput.
 **WLAN Auto with Noise Reduction:**

FreshTomato Wiki

User Tools

Site Tools

Differences

Page Tools