FreshTomato Wiki

User Tools

Site Tools

Trace:
advanced-wireless

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
advanced-wireless [2024/11/09 17:27] – [Inactivity Timer] -Condense, formatting hogwildadvanced-wireless [2024/11/27 01:41] (current) – [Regulatory Mode] hogwild
Line 8: Line 8:
 (Supported only on MIPS RT & RT-N branch/images, NOT ARM) (Supported only on MIPS RT & RT-N branch/images, NOT ARM)
  
-Enabling Afterburner enables support for Broadcom's frame-bursting and compression technology to improve 802.11g wireless throughput. This feature is also known as //125 High Speed Mode// (or //125HSM//) and goes by other names with other hardware vendors.+Checking Afterburner enables support for Broadcom's frame-bursting and compression technology to improve 802.11g WiFi throughput. This feature is also known as //125 High Speed Mode// (or //125HSM//) and goes by other names with other hardware vendors.
  
 In theory, this boosts signaling rates to 125 Mb/s. Realistically, one can expect 30-40 Mb/s throughput. Since this is a proprietary protocol extension, effectiveness varies depending on the client device vendor maker as well. In theory, this boosts signaling rates to 125 Mb/s. Realistically, one can expect 30-40 Mb/s throughput. Since this is a proprietary protocol extension, effectiveness varies depending on the client device vendor maker as well.
Line 35: Line 35:
 ==== Protected Management Frames ==== ==== Protected Management Frames ====
  
-(Default: Off) (ARM-only).+(Default: Off). (ARM-only).
  
 Protected Management Frames (PMF), or MFP. Protected Management Frames (PMF), or MFP.
  
-  * Disable * -  Turns off PMF. +  * Disable * -  turns off PMF. 
-  * Capable  -  Allows all WiFi clients to connect to the network, \\ whether they're PMF-capable or not. Check your WiFi clients \\ for connectivity problems. +  * Capable  -  allows all WiFi clients to connect to the network, \\ whether or not they're PMF-capable. Check your WiFi clients \\ for connectivity problems. 
-  * Required - Only PMF-capable WiFi clients may connect to the network.+  * Required - only PMF-capable WiFi clients may connect to WiFi.
  
- \\ This option has been supported since release 2021.6.+ \\ This option has been supported since release 2021.6. It is disabled by default, since not all WiFi clients support it.
  
 Protected Management Frames provide security for unicast and multicast management action frames. PMF prevents unicast management action frames from eavesdropping and forging data. It also prevents forged multicast management action frames. PMF augments existing privacy protections for data frames with mechanisms that improve the resilience of mission-critical networks. Protected Management Frames provide security for unicast and multicast management action frames. PMF prevents unicast management action frames from eavesdropping and forging data. It also prevents forged multicast management action frames. PMF augments existing privacy protections for data frames with mechanisms that improve the resilience of mission-critical networks.
- 
-This feature is disabled by default, since not all WiFi clients support it. 
  
  \\  \\
Line 95: Line 93:
  
   * Disable *   * Disable *
-  * Auto - Determines which client can reach the router at a specific time \\ through CTS and its send (RTS) packet.+  * Auto - determines which client can reach the router  \\ at a specific time through CTS and its send (RTS) packet.
  
  \\  \\
Line 127: Line 125:
  
   - Federal Communications Commission or "FCC" (USA)   - Federal Communications Commission or "FCC" (USA)
-  - European Telecommunications Standards Institute or "ETSI"+  - European Telecommunications Standards Institute ("ETSI")
   - Telecom Engineering Center or "TELEC" (Japan)   - Telecom Engineering Center or "TELEC" (Japan)
   - (South) Korea Communications Commission (KCC)   - (South) Korea Communications Commission (KCC)
Line 339: Line 337:
 ==== Inactivity Timer ==== ==== Inactivity Timer ====
  
-(Default 0 / Disabled) (range 60 - 3600 seconds) +Sets the threshold time after which virtual interfaces are removed in Media Bridge mode.
- +
-When //Wireless Mode// is set to Media Bridge in the Network menu, this Inactivity Timer field appears under the corresponding Media Bridge Radio. +
- +
-Media Bridge Mode creates a Virtual Interface wlX.Y for every client device connected to the router Those rirtual interfaces will be removed after the time periodset in this field.+
  
-Notes:+(Default: "0 / Disabled"). (Range: 60 - 3600 seconds)
  
-• This field will only be visible when using Media Bridge and only on the selected Media Bridge Radio.+If Media Bridge is enabled, the field appears under the corresponding Media Bridge Radio.
  
-• If set to O/Disabled, a wlX Y interface is retained for every Client Device that has connected until the Router is rebooted, including Client Devices that have disconnected and are no longer active.\\+Media Bridge mode creates a Virtual Interface ("wlX.Y") for every router client connected. Those interfaces will be removed after the time period set here. If set to "O"/Disabled", a "wlX.Y" interface is retained for every connected client until the router reboots, including inactive, disconnected devices.\\  \\
  
  
advanced-wireless.1731173273.txt.gz · Last modified: 2024/11/09 17:27 by hogwild

Page Tools

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki