Differences

This shows you the differences between two versions of the page.

--- bwm-realtime [2022/07/14 23:02] – added default interfaces infos hommeoursporc
+++ bwm-realtime [2023/05/14 03:09] – -Added "The" hogwild
@@ Line 1: / Line 1: @@
 ====== Real-Time ======
-Real-time bandwidth provides live monitoring of any router interface in graph form.  Data are reset when the page first loads((
+The Real-time bandwidth menu provides live monitoring of any router interface in graph form.  Data are reset when the page first loads((
 Although there is not data to "reset" when page first loads, it is reset on each subsequent [re]loads
-)), and the display draws gradually. The maximum display window is 10 minutes, and data resolution is 2 seconds. That means 10 minutes of data can be displayed at a time, and that data can be sampled every 2 seconds, at most. Only one interface at at a time can be displayed. Clicking on the interface name in any square will display the bandwidth of that interface. The interfaces available to be monitored will depend on the router hardware and configurations (e.g., using a VPN or virtual wireless interfaces).
+)), and the display draws gradually. The maximum display window is 10 minutes, and data resolution is 2 seconds. That means 10 minutes of data can be displayed at a time, and that data can be sampled every 2 seconds, at most. Only one interface at at a time can be displayed. Clicking on the interface name in any square displays the bandwidth of that interface. The interfaces available to be monitored will depend on the router hardware and configurations (for example, using a VPN or virtual wireless interfaces).
-\\ FreshTomato default interfaces:\\  **vlan2:** wired WAN port on the router\\  **vlan1:** wired LAN ports on the router\\  **eth0:** all Ethernet ports on the router\\  **eth1:** wireless 2.4 GHz\\  **eth2:** wireless 5 GHz (if equipped)\\  **br0:** software bridge of vlan1, eth1, eth2 (what is commonly called LAN)
+\\ Some examples of FreshTomato interfaces are (may vary based on firmware release and hardware model):
-\\  **Avg.** Applies a percentile to the display. This can show how a data point compares to the total distribution (graph) over time.\\  **Max:** Choosing **Uniform** scales graphs to the maximum value recorded on all interfaces. Choosing **Per If** (Per Interface) scales graphs based on data from one interface only.\\  **Unit: kbit/KB, Mbit/MB** - toggles between displaying volume in kilobits/Kilobytes (1,000) or megabits/Megabytes (1,000,000).\\  **Display: **Choosing **Solid** graphs bandwidth usage with a solid area, choosing **Line** graphs bandwidth with a single line representing maximum values.\\  **Color**: Switch between different, pre-specified color schemes for the graph.
+  * **vlan2:**  Wired WAN port on the router
+  * **vlan1:**  Wired LAN ports on the router
+  * **eth0:**   All Ethernet ports on the router
+  * **eth1:**   Wireless 2.4 GHz
+  * **eth2:**   Wireless 5 GHz (if equipped)
+  * **br0:**    The software bridge corresponding to vlan1, eth1, eth2. (What is commonly called LAN)
-//**[reverse]** //: Reverses the graph's color scheme. For example, a device traced in blue is traced in orange and a device traced in orange is traced in blue.\\  \\  \\  [[https://wiki.freshtomato.org/lib/exe/detail.php?id=real-time&media=pasted:20200520-162850.png|{{:pasted:20200520-162850.png}}]]
+\\ **Avg.** This applies a percentile to the image. This can show how a data point compares to the total distribution (graph) over time.
+**Max:** Choosing **Uniform** scales graphs to the maximum value recorded on all interfaces. Choosing **Per If** (Per Interface) scales graphs based on data from one interface only.
+**Unit: kbit/KB, Mbit/MB** - This toggles between displaying volume in kilobits/Kilobytes (1,000) or megabits/Megabytes (1,000,000).
+**Display: **Choosing **Solid** graphs bandwidth usage with a solid area, choosing **Line** graphs bandwidth with a single line representing maximum values.
+**Color**: Switches between various pre-specified color schemes for the graph.
+**[reverse]** : This reverses the graph's color scheme. For example, a device traced in blue is traced in orange and vice versa.\\  \\  \\  [[https://wiki.freshtomato.org/lib/exe/detail.php?id=real-time&media=pasted:20200520-162850.png|{{:pasted:20200520-162850.png}}]]
  \\
-//Cursor-Tracking Readout: //Bandwidth graphs feature a a //Cursor-Tracking Readout//. When you move your mouse cursor over the graph, the graph displays the following at the top right corner: Day of Week,\\ Time, and Bandwidth usage. These update when you move the mouse.
+//Cursor-Tracking Readout: //Bandwidth graphs feature a a //Cursor-Tracking Readout//. When you move your mouse cursor over the graph, the graph displays the following at the top right corner:
+  * Day of Week
+  * Time
+  * Bandwidth usage.
+These update as you move your mouse.
-The Cursor-Tracking Readout disappears after 5 intervals: that is, 10 seconds in //Real-Time//, 10 minutes in //Last 24 Hours//, etcetera.
+The Cursor-Tracking Readout disappears after 5 intervals: that is, 10 seconds in //Real-Time//, 10 minutes in //Last 24 Hours//, and so on.
 //Mouse-Click Readout//: Bandwidth graphs also feature a //Mouse-Click Readout//: If you click on the graph, the date/time/bandwidth numbers will display beside the mouse cursor.

FreshTomato Wiki

User Tools

Site Tools

Differences

Page Tools