FreshTomato Wiki

User Tools

Site Tools

Trace:
bwm-realtime

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
Next revisionBoth sides next revision
bwm-realtime [2023/06/16 02:51] – -changed "The Bandwidth Monitor - Real-Time" to "The Bandwidth - Real-Time" hogwildbwm-realtime [2024/05/07 03:15] – -condense, grammar, formatting hogwild
Line 1: Line 1:
 ====== Bandwidth - Real-Time ====== ====== Bandwidth - Real-Time ======
  
-The Bandwidth - Real-Time menu provides live monitoring of any router interface in graph form.  Data are reset when the page first loads(( +The Bandwidth - Real-Time menu shows live monitoring of any router interface in graph form.  Data are reset when the page first loads(( 
-Although there is not data to "reset" when page first loads, it is reset on each subsequent [re]loads+Though there is not data to "reset" when page first loads, it is reset on each subsequent [re]loads
 )), and the display draws gradually. )), and the display draws gradually.
  
-The maximum display window is 10 minutes, and data resolution is 2 seconds. That means 10 minutes of data can be displayed at a time, and that data can be sampled at most, every 2 seconds. Only one interface at at a time can be displayed. Clicking on the interface name in any square displays the bandwidth of that interface.+The maximum display window is 10 minutes, and data resolution is 2 seconds. Thus, 10 minutes of data can be displayed at a time, and that data is sampled at most, every 2 seconds. Only one interface can be displayed at a time. Clicking on the interface name in any square displays the bandwidth of that interface.
  
 The interfaces available to be monitored will depend on your router hardware and configuration (for example, using a VPN or virtual wireless interface). The interfaces available to be monitored will depend on your router hardware and configuration (for example, using a VPN or virtual wireless interface).
Line 13: Line 13:
   * **vlan2:**  The wired WAN port on the router   * **vlan2:**  The wired WAN port on the router
   * **vlan1:**  The wired LAN ports on the router   * **vlan1:**  The wired LAN ports on the router
-  * **eth0:**    All Ethernet ports on the router +  * **eth0:**   All Ethernet ports on the router 
-  * **eth1:**    The Wireless 2.4 GHz radio +  * **eth1:**   The Wireless 2.4 GHz radio 
-  * **eth2:**    The wireless 5 GHz (if equipped) radio +  * **eth2:**   The wireless 5 GHz (if equipped) radio 
-  * **br0:**     The software bridge corresponding to vlan1, eth1, eth2. (or "The LAN")+  * **br0:**    The software bridge corresponding to vlan1, eth1, eth2. (or "The LAN")
  
 \\ **Avg.** This applies a percentile to the image. This shows how a data point compares to the total distribution over time. \\ **Avg.** This applies a percentile to the image. This shows how a data point compares to the total distribution over time.
bwm-realtime.txt · Last modified: 2024/05/07 03:20 by hogwild

Page Tools

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki