Differences

This shows you the differences between two versions of the page.

--- disable_access_to_admin_access_ssh:gui_for_guest_v:wlan [2023/05/14 04:44] – -formatting-bold Avoid filtering on br0 hogwild
+++ disable_access_to_admin_access_ssh:gui_for_guest_v:wlan [2024/03/02 17:01] (current) – hogwild
@@ Line 1: / Line 1: @@
-====== Disable Administrative Access (SSH/GUI) for Guest VLAN/WLAN ======
+====== Disable Administrative Access (SSH/GUI) to Guest VLAN/WLAN ======
-The default settings allow access to FreshTomato's administration ports (SSH and HTTP/S) from all configured VLANs/WLANs.
+The default settings allow access to the router's administration ports (SSH and HTTP/S) from all configured VLANs/WLANs.
-If you don't want communication to be available on a certain VLAN or WLAN, you can filter out access to those ports by using the following script in the Firewall field of the Scripts menu:
+If you don't want communication on a certain VLAN or WLAN, you can filter out access to its ports using the following script in the //Firewall// field of the [[https://wiki.freshtomato.org/doku.php/admin-scripts|Scripts]] menu:  \\  \\
- \\
 <code ->
@@ Line 12: / Line 11: @@
 \\
-The bridge number ("br1" in the above example) represents the interface on which you want access disabled. Double check the Network menu to be certain. *Avoid filtering on bridge "br0"* to avoid locking out access to the router.
+The bridge number ("br1" in the example) represents the interface on which you want access disabled. Double check the [[basic-network|Network]] menu to be certain. **Avoid filtering on bridge "br0"** to avoid locking out access to the router.
-If you use non-standard port numbers, you can change the ports used above (22,80,443).
+If you use non-standard port numbers, you can change the port numbers used above (22,80,443).
-If you have multiple bridges or guest VLANs, you can add additional lines, and change the relevant bridge interface name. The command will take effect as soon as the firewall script next runs.
+If you have multiple bridges or guest VLANs, you can add additional lines and change the relevant bridge interface names. The command will take effect as soon as the next run of the firewall script.
 You can force the command(s) to take effect manually by logging on to the router and typing the command: "//service firewall restart" //or by rebooting the device.

FreshTomato Wiki

User Tools

Site Tools

Differences

Page Tools