Differences

This shows you the differences between two versions of the page.

--- dongle_compatibility [2022/09/15 22:18] – Changed Inseego USB80 and USB730l to "Not supported" hogwild
+++ dongle_compatibility [2022/09/15 22:40] – hogwild
@@ Line 7: / Line 7: @@
 | Alcatel | MW40 | Various  | LTE CAT4  |   |   |   |   | 4G LTE  | No external antenna jacks.  |
 | Android (smartphones) | Various | Various | Depends on phone  | Depends on phone  | Depends on phone  | Depends on phone  | RNDIS  | Depends on phone  | At least 7 models of Android smartphones have been reported to work in USB tether mode. So far, these include the Samsung Galaxy A3 2015, Samsung Galaxy S7, Samsung Galaxy S8 Plus,     Samsung Galaxy S10, Samsung Galaxy S21 Ultra, and ZTE Blade A7 Prime. |
-| Huawei | E3372 \\ (h and s) Non-Hilink | Various | LTE CAT4  |   | 12d1:1f01  | 12d1:14d  | ECM  | 4G: \\ \\ 3G UMTS: 900/2100 MHz  | Has 2 external antenna jacks. Works well.  |
+| Huawei | E3372 \\ (h and s) Non-Hilink | Various | LTE CAT4  |   | 12d1:1f01  | 12d1:14d  | ECM  | 4G: \\ \\ 3G UMTS: 900/2100 MHz  | Has 2 external antenna jacks. Works well with FreshTomato.  |
 | Huawei  | E3372 \\ (h and s) Hilink  | Various  | LTE CAT4  |   |   | 12d1:14dc  | ECM  | 4G: \\ \\ 3G UMTS: 900/2100 MHz  | This is the same hardware as the above modem. However, this model has problems with some sites (~30%) due to a bug in the Broadcom driver. However, you can switch from Hilink to non-Hilink and vice versa by uploading the appropriate firmware; [[https://www.mediafire.com/folder/ll9ieqqooyhy5/Documents#ll9ieqqooyhy5|found here.]] \\ \\ See [[https://www.0xf8.org/2017/01/flashing-a-huawei-e3372h-4g-lte-stick-from-hilink-to-stick-mode/|here]] for details. |
 | Huawei  | E398  | Various  | LTE CAT3  |   | 12d1:1446  | 12d1:1506  | Serial and QMI  |   | Some versions of this have 1 antenna jack, and some have 2 jacks. In general this dongle works well, but sometimes the driver crashes because FreshTomato has problems with the //qmi_wwan// module. \\ Update: it seems that using ONLY USB 1.1 driver fixes this issue in 90% of cases (at least on ARM routers).  |
-| Novatel | Mifi2000  | Various  | LTE CAT3  |   | 12d1:1446  | 12d1:1506  | Serial and QMI  |   | Some versions of this have 1 antenna jack, and some have 2 jacks. In general this dongle works well, but sometimes the driver crashes because FreshTomato has problems with the //qmi_wwan// module. \\ Update: it seems that using ONLY USB 1.1 driver fixes this issue in 90% of cases (at least on ARM routers).  |
+| Novatel | MiFi2000  | Various  | LTE CAT3  |   | 12d1:1446  | 12d1:1506  | Serial and QMI  |   | Some versions of this have 1 antenna jack, and some have 2 jacks. In general this dongle works well, but sometimes the driver crashes because FreshTomato has problems with the //qmi_wwan// module. \\ Update: it seems that using ONLY USB 1.1 driver fixes this issue in 90% of cases (at least on ARM routers).  |
-| Novatel | Mifi2000  | Various  | LTE CAT3  |   | 12d1:1446  | 12d1:1506  | Serial and QMI  |   | Some versions of this have 1 antenna jack, and some have 2 jacks. In general this dongle works well, but sometimes the driver crashes because FreshTomato has problems with the //qmi_wwan// module. \\ Update: it seems that using ONLY USB 1.1 driver fixes this issue in 90% of cases (at least on ARM routers).  |
+| Novatel | MiFi2000  | Various  | LTE CAT3  |   | 12d1:1446  | 12d1:1506  | Serial and QMI  |   | Some versions of this have 1 antenna jack, and some have 2 jacks. In general this dongle works well, but sometimes the driver crashes because FreshTomato has problems with the //qmi_wwan// module. \\ Update: it seems that using ONLY USB 1.1 driver fixes this issue in 90% of cases (at least on ARM routers).  |
+| Novatel | MiFi6620 | Verizon | LTE |   |   |   |   | EDGE/GSM: (850/900/1800/1900)HSPA/UMTS: (850/900/1900/2100) | Use a subnet other than the one configured in FreshTomato. |
+|   |   |   |   |   |   |   |   |   |   |
 | Novatel (now Inseego)  | USB730l  | Verizon | LTE CAT6 | HSDPA 7.2 |   | 1410:9030  | Serial and RNDIS  | US LTE Bands: B2/B4/B5/B13\\ \\ Global LTE Bands: B3/B4 \\ \\ LTE-U Carrier Aggregation: 13+4, 13+2 \\ \\ CDMA EV-DO rA: BC0/BC1 \\ \\ Quad band: UMTS/HSPA B1/B2/B5/B8 \\ \\ Quad band: GPRS/EDGE B2/B3/B5/B8  | Not yet supported.  |
 | Inseego  | USB800  | AT&T | LTE CAT18 |   |   | 1410:B023  | Serial and RNDIS  | 4G LTE: B1/B2/B3/B4/B5/B7/B12/B13/B14/B17/B18/B20/B28/B29/B30/B66 \\ \\ HSPA+/UMTS: B1/B2/B4/B5/B8 \\ \\ Carrier Aggregation:  5 CC Download CA | Not yet supported.This modem uses a series of 5 Vendor IDs, each for different functions. The ID listed in the Vendor ID column is for the modem itself.  |

FreshTomato Wiki

User Tools

Site Tools

Differences

Page Tools