FreshTomato Wiki

User Tools

Site Tools

Trace:
dongle_compatibility

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revisionBoth sides next revision
dongle_compatibility [2022/05/01 09:37] – rs232dongle_compatibility [2022/05/12 00:16] – Removed scheduled release date from usb800 and usb730l hogwild
Line 9: Line 9:
 | Huawei  | E3372 \\ (h and s) Hilink  | Various  | LTE CAT 4  |   |   | 12d1:14dc  | ECM  | 4G: \\ \\ 3G UMTS: 900/2100 MHz  | This is the same hardware as the above modem. However, this model has problems with some sites (~30%) due to a bug in the Broadcom driver. However, you can switch from Hilink to non-Hilink and vice versa by uploading the appropriate firmware; [[https://www.mediafire.com/folder/ll9ieqqooyhy5/Documents#ll9ieqqooyhy5|found here.]] \\ \\ See [[https://www.0xf8.org/2017/01/flashing-a-huawei-e3372h-4g-lte-stick-from-hilink-to-stick-mode/|here]] for details. | | Huawei  | E3372 \\ (h and s) Hilink  | Various  | LTE CAT 4  |   |   | 12d1:14dc  | ECM  | 4G: \\ \\ 3G UMTS: 900/2100 MHz  | This is the same hardware as the above modem. However, this model has problems with some sites (~30%) due to a bug in the Broadcom driver. However, you can switch from Hilink to non-Hilink and vice versa by uploading the appropriate firmware; [[https://www.mediafire.com/folder/ll9ieqqooyhy5/Documents#ll9ieqqooyhy5|found here.]] \\ \\ See [[https://www.0xf8.org/2017/01/flashing-a-huawei-e3372h-4g-lte-stick-from-hilink-to-stick-mode/|here]] for details. |
 | Huawei  | E398  | Various  |   |   | 12d1:1446  | 12d1:1506  | Serial and QMI  |   | Some versions of this have 1 antenna jack, and some have 2 jacks. In general this dongle works well, but sometimes the driver crashes because FreshTomato has problems with the //qmi_wwan// module. \\ Update: it seems that using ONLY USB 1.1 driver fixes this issue in 90% of cases (at least on ARM routers).  | | Huawei  | E398  | Various  |   |   | 12d1:1446  | 12d1:1506  | Serial and QMI  |   | Some versions of this have 1 antenna jack, and some have 2 jacks. In general this dongle works well, but sometimes the driver crashes because FreshTomato has problems with the //qmi_wwan// module. \\ Update: it seems that using ONLY USB 1.1 driver fixes this issue in 90% of cases (at least on ARM routers).  |
-| Novatel (now Inseego)  | USB730l  | Verizon | LTE CAT 6 | HSDPA 7.2 |   | 1410:9030  | Serial and RNDIS  | US LTE Bands: B2/B4/B5/B13\\ \\ Global LTE Bands: B3/B4 \\ \\ LTE-U Carrier Aggregation: 13+4, 13+2 \\ \\ CDMA EV-DO rA: BC0/BC1 \\ \\ Quad band: UMTS/HSPA B1/B2/B5/B8 \\ \\ Quad band: GPRS/EDGE B2/B3/B5/B8  | Scheduled for 2022.1  | +| Novatel (now Inseego)  | USB730l  | Verizon | LTE CAT 6 | HSDPA 7.2 |   | 1410:9030  | Serial and RNDIS  | US LTE Bands: B2/B4/B5/B13\\ \\ Global LTE Bands: B3/B4 \\ \\ LTE-U Carrier Aggregation: 13+4, 13+2 \\ \\ CDMA EV-DO rA: BC0/BC1 \\ \\ Quad band: UMTS/HSPA B1/B2/B5/B8 \\ \\ Quad band: GPRS/EDGE B2/B3/B5/B8  |   | 
-| Inseego  | USB800  | AT&T | LTE CAT 18 |   |   | 1410:B023  | Serial and RNDIS  | 4G LTE: B1/B2/B3/B4/B5/B7/B12/B13/B14/B17/B18/B20/B28/B29/B30/B66 \\ \\ HSPA+/UMTS: B1/B2/B4/B5/B8 \\ \\ Carrier Aggregation:  5 CC Download CA | Scheduled for 2022.2 .This modem uses a series of 5 Vendor IDs, each for different functions. The ID listed in the Vendor ID column is for the modem itself.  |+| Inseego  | USB800  | AT&T | LTE CAT 18 |   |   | 1410:B023  | Serial and RNDIS  | 4G LTE: B1/B2/B3/B4/B5/B7/B12/B13/B14/B17/B18/B20/B28/B29/B30/B66 \\ \\ HSPA+/UMTS: B1/B2/B4/B5/B8 \\ \\ Carrier Aggregation:  5 CC Download CA | This modem uses a series of 5 Vendor IDs, each for different functions. The ID listed in the Vendor ID column is for the modem itself.  |
 | ZTE  | MF923  | AT&T  | LTE  |   |   |   |   | LTE: B2/B4/B5/B17/B29 \\ \\ 4G HSPA+ : 850/1900/2100 MHz \\ \\ 3G UMTS: 850/1900/2100 MHz  | This mobile hotspot was tested as working when connected to the USB port of a Netgear WNDR3400v1.The Micro USB port of this device receives power input from the router, so the hotspot can be powered that way. Caution is advised, as not all routers are designed to output adequate USB power for a device such as this. Overheating might be possible.  | | ZTE  | MF923  | AT&T  | LTE  |   |   |   |   | LTE: B2/B4/B5/B17/B29 \\ \\ 4G HSPA+ : 850/1900/2100 MHz \\ \\ 3G UMTS: 850/1900/2100 MHz  | This mobile hotspot was tested as working when connected to the USB port of a Netgear WNDR3400v1.The Micro USB port of this device receives power input from the router, so the hotspot can be powered that way. Caution is advised, as not all routers are designed to output adequate USB power for a device such as this. Overheating might be possible.  |
 |   |   |   |   |   |   |   |   |   |   | |   |   |   |   |   |   |   |   |   |   |
dongle_compatibility.txt · Last modified: 2023/11/12 23:09 by hogwild

Page Tools

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki