FreshTomato Wiki

User Tools

Site Tools

Trace:
dongle_compatibility

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
Next revisionBoth sides next revision
dongle_compatibility [2022/09/18 18:21] – Updated descriptions of e3372h models hogwilddongle_compatibility [2022/09/19 00:35] – -added need to use tethered mode on 6620L hogwild
Line 7: Line 7:
 | Alcatel | MW40V | Various  | LTE CAT4  |   |   | 1bbb:0195  | RNDIS  | MW41NF\\ FDD LTE: Band 1, 2, 3, 4, 5, 7, 8, 12, 13, 17, 27, 28\\ \\ UMTS: Band 1, 2, 4, 5, 8 \\  \\ GSM: Band 2, 3, 5, 8 \\ \\ MW41CL\\ FDD LTE: Band 1, 3, 5, 7, 8, 28. Compatible with Band 26 \\ \\ TDD LTE : Band 40 compatible with B38 \\ \\ UMTS Band 1, 3, 5, 8  | No external antenna jacks. At least one report of working on 2022.5. Ethernet clients worked fine, but there was very limited speed (~ 5MB/s) to wireless clients.  | | Alcatel | MW40V | Various  | LTE CAT4  |   |   | 1bbb:0195  | RNDIS  | MW41NF\\ FDD LTE: Band 1, 2, 3, 4, 5, 7, 8, 12, 13, 17, 27, 28\\ \\ UMTS: Band 1, 2, 4, 5, 8 \\  \\ GSM: Band 2, 3, 5, 8 \\ \\ MW41CL\\ FDD LTE: Band 1, 3, 5, 7, 8, 28. Compatible with Band 26 \\ \\ TDD LTE : Band 40 compatible with B38 \\ \\ UMTS Band 1, 3, 5, 8  | No external antenna jacks. At least one report of working on 2022.5. Ethernet clients worked fine, but there was very limited speed (~ 5MB/s) to wireless clients.  |
 | Android (smartphones) | Various | Various | Depends on phone  | Depends on phone  | Depends on phone  | Depends on phone  | RNDIS  | Depends on phone  | At least 8 models of Android smartphones have been reported to work in USB tether mode. So far, these include the Samsung Galaxy A3 2015, Samsung Galaxy S7, Samsung Galaxy S8 Plus, Samsung Galaxy S10, Samsung Galaxy S21 Ultra, and ZTE Blade A7 Prime. | | Android (smartphones) | Various | Various | Depends on phone  | Depends on phone  | Depends on phone  | Depends on phone  | RNDIS  | Depends on phone  | At least 8 models of Android smartphones have been reported to work in USB tether mode. So far, these include the Samsung Galaxy A3 2015, Samsung Galaxy S7, Samsung Galaxy S8 Plus, Samsung Galaxy S10, Samsung Galaxy S21 Ultra, and ZTE Blade A7 Prime. |
-| Huawei | E3372H-153 \\ (h and s) Non-Hilink | LMT | LTE CAT4  | UMTS  | 12d1:1f01  | 12d1:14d  | ECM  | 4G: Band 1, 3, 7, 8, 20\\ \\ 3G UMTS: 900/2100 MHz  | Has 2 external antenna jacks. Works well with FreshTomato. There are at least 6 versions of E3372 chips, so check model numbers carefully.  | +| Huawei | E3372H-153 \\ (h and s) Non-Hilink | LMT (Latvia Mobile) | LTE CAT4  | UMTS  | 12d1:1f01  | 12d1:14d  | ECM  | 4G: Band 1, 3, 7, 8, 20\\ \\ 3G UMTS: 900/2100 MHz  | Has 2 external antenna jacks. Works well with FreshTomato. There are at least 6 versions of E3372 chips, so check model numbers carefully. This version was from Latvia Mobile.  | 
-| Huawei | E3372H | Megafon | LTE CAT4 | UMTS |  |  |  |  |  |+| Huawei | E3372H | Megafon | LTE CAT4 | UMTS |   |   |   |   |   |
 | Huawei  | E3372 \\ (h and s) Hilink  | Various  | LTE CAT4  |   |   | 12d1:14dc  | ECM  | 4G: Band 1, 3, 7, 8, 20\\ \\ 3G UMTS: 900/2100 MHz  | This is the same hardware as the above modem, but this model has problems with some sites (~30%) due to a bug in the Broadcom driver. However, you can switch from Hilink to non-Hilink and vice versa by uploading the appropriate firmware found here: [[https://www.mediafire.com/folder/ll9ieqqooyhy5/Documents#ll9ieqqooyhy5|found here.]] \\ \\ See [[https://www.0xf8.org/2017/01/flashing-a-huawei-e3372h-4g-lte-stick-from-hilink-to-stick-mode/|here]] for details. There are at least 6 versions of the E3372 chips, so check model numbers carefully. | | Huawei  | E3372 \\ (h and s) Hilink  | Various  | LTE CAT4  |   |   | 12d1:14dc  | ECM  | 4G: Band 1, 3, 7, 8, 20\\ \\ 3G UMTS: 900/2100 MHz  | This is the same hardware as the above modem, but this model has problems with some sites (~30%) due to a bug in the Broadcom driver. However, you can switch from Hilink to non-Hilink and vice versa by uploading the appropriate firmware found here: [[https://www.mediafire.com/folder/ll9ieqqooyhy5/Documents#ll9ieqqooyhy5|found here.]] \\ \\ See [[https://www.0xf8.org/2017/01/flashing-a-huawei-e3372h-4g-lte-stick-from-hilink-to-stick-mode/|here]] for details. There are at least 6 versions of the E3372 chips, so check model numbers carefully. |
 | Huawei  | E398  | Various  | LTE CAT3  |   | 12d1:1446  | 12d1:1506  | Serial and QMI  |   | Some versions have 1 antenna jack, and some have 2 jacks. In general this dongle works well, but sometimes the driver crashes because FreshTomato has problems with the //qmi_wwan// module. \\ Update: it seems that using ONLY the USB 1.1 driver fixes this issue in 90% of cases (at least on ARM routers).  | | Huawei  | E398  | Various  | LTE CAT3  |   | 12d1:1446  | 12d1:1506  | Serial and QMI  |   | Some versions have 1 antenna jack, and some have 2 jacks. In general this dongle works well, but sometimes the driver crashes because FreshTomato has problems with the //qmi_wwan// module. \\ Update: it seems that using ONLY the USB 1.1 driver fixes this issue in 90% of cases (at least on ARM routers).  |
Line 16: Line 16:
 | Netgear | Aircard 791L | Verizon | LTE CAT6 | IS-2000 Release 0 |   |   |   | 4G LTE CA: Band 13, 44 \\ 4G  LTE: Band 2, 3, 4, 7, 13 \\  \\ MTS/HSPA+ : 850/900/1900/2100 MHz \\  \\ CDMA 1X/EvDO/eHRPD: 800/1900 MHz   \\  \\ GSM/GPRS/EDGE: 850/900/1800/1900 MHz |   | | Netgear | Aircard 791L | Verizon | LTE CAT6 | IS-2000 Release 0 |   |   |   | 4G LTE CA: Band 13, 44 \\ 4G  LTE: Band 2, 3, 4, 7, 13 \\  \\ MTS/HSPA+ : 850/900/1900/2100 MHz \\  \\ CDMA 1X/EvDO/eHRPD: 800/1900 MHz   \\  \\ GSM/GPRS/EDGE: 850/900/1800/1900 MHz |   |
 | Novatel | MiFi2200  | Various  | LTE CAT3  | CDMA EV-DO Rev.A  | 1410:5030 | 1410:6000 | Serial and QMI  |   | ** Editing still in progress.  | | Novatel | MiFi2200  | Various  | LTE CAT3  | CDMA EV-DO Rev.A  | 1410:5030 | 1410:6000 | Serial and QMI  |   | ** Editing still in progress.  |
-| Novatel | MiFi6620 | Verizon | LTE |   |   |   |   | LTE Band 13/4 \\ \\ EDGE/GSM: 850/900/1800/1900)  \\  \\ HSPA/UMTS: 850/900/1900/2100) | Worked well with Release 2022.5.Use a LAN subnet other than the one(s) configured in FreshTomato to reduce conflicts. |+| Novatel | MiFi6620 | Verizon | LTE |   |   |   |   | LTE Band 13/4 \\ \\ EDGE/GSM: 850/900/1800/1900)  \\  \\ HSPA/UMTS: 850/900/1900/2100) | Worked well in tethered mode with Release 2022.5. It's recommended that you use a LAN subnet other than the one(s) configured in FreshTomato to reduce conflicts. |
 | Left blank intentionally  | Left blank intentionally  |   |   |   |   | Left blank intentionally  |   |   | Left blank intentionally for future Novatel entries  | | Left blank intentionally  | Left blank intentionally  |   |   |   |   | Left blank intentionally  |   |   | Left blank intentionally for future Novatel entries  |
 | Novatel (now Inseego)  | USB730L  | Verizon | LTE CAT6 | HSDPA 7.2 |   | 1410:9030  | Serial and RNDIS  | US LTE Bands: B2/B4/B5/B13\\ \\ Global LTE Bands: B3/B4 \\ \\ LTE-U Carrier Aggregation: 13+4, 13+2 \\ \\ CDMA EV-DO rA: BC0/BC1 \\ \\ Quad band: UMTS/HSPA B1/B2/B5/B8 \\ \\ Quad band: GPRS/EDGE Band 1, 3, 5, 8  | Not yet supported.  | | Novatel (now Inseego)  | USB730L  | Verizon | LTE CAT6 | HSDPA 7.2 |   | 1410:9030  | Serial and RNDIS  | US LTE Bands: B2/B4/B5/B13\\ \\ Global LTE Bands: B3/B4 \\ \\ LTE-U Carrier Aggregation: 13+4, 13+2 \\ \\ CDMA EV-DO rA: BC0/BC1 \\ \\ Quad band: UMTS/HSPA B1/B2/B5/B8 \\ \\ Quad band: GPRS/EDGE Band 1, 3, 5, 8  | Not yet supported.  |
dongle_compatibility.txt · Last modified: 2024/04/28 16:50 by hogwild

Page Tools

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki