FreshTomato Wiki

User Tools

Site Tools

Trace:
dongle_compatibility

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revisionBoth sides next revision
dongle_compatibility [2022/09/19 00:35] – -added need to use tethered mode on 6620L hogwilddongle_compatibility [2022/09/19 21:34] – -Edits to 3G categories, default protocols. Deleted MiFi2200 since no networks support it. hogwild
Line 3: Line 3:
 <sortable> <sortable>
  
-^  Manufacturer  ^  Model  ^  Vendor  ^  4G Standard  ^  3G Standard  ^  Default Id  ^  Modem Id  ^  Protocol  ^  Bands supported  ^  Comments  ^+^  Manufacturer  ^  Model  ^  Vendor  ^  4G Standard  ^  3G Standard  ^  Default Id  ^  Modem ID  ^  DefaultProtocol  ^  Bands supported  ^  Comments  ^
 | Alcatel | Link Key IK40V | Various  | LTE CAT4  |   |   | 1d6b:0195 (Czech T-Mobile)  | RNDIS  | 4G LTE FDD: Band 1, 4, 7, 8, 20 \\ \\ HSDPA/HSUPA: 900/1800/2100 MHz \\ \\ EDGE/GPRS: 850/900/1800/1900 MHz  | Works well. No external antenna jacks. This is the lead developer's 4G test modem when he uses the RNDIS protocol: [[https://bitbucket.org/pedro311/freshtomato-arm/commits/453542154d55df6b2a172443564e0a6fdc0a3286|link]] | | Alcatel | Link Key IK40V | Various  | LTE CAT4  |   |   | 1d6b:0195 (Czech T-Mobile)  | RNDIS  | 4G LTE FDD: Band 1, 4, 7, 8, 20 \\ \\ HSDPA/HSUPA: 900/1800/2100 MHz \\ \\ EDGE/GPRS: 850/900/1800/1900 MHz  | Works well. No external antenna jacks. This is the lead developer's 4G test modem when he uses the RNDIS protocol: [[https://bitbucket.org/pedro311/freshtomato-arm/commits/453542154d55df6b2a172443564e0a6fdc0a3286|link]] |
 | Alcatel | MW40V | Various  | LTE CAT4  |   |   | 1bbb:0195  | RNDIS  | MW41NF\\ FDD LTE: Band 1, 2, 3, 4, 5, 7, 8, 12, 13, 17, 27, 28\\ \\ UMTS: Band 1, 2, 4, 5, 8 \\  \\ GSM: Band 2, 3, 5, 8 \\ \\ MW41CL\\ FDD LTE: Band 1, 3, 5, 7, 8, 28. Compatible with Band 26 \\ \\ TDD LTE : Band 40 compatible with B38 \\ \\ UMTS Band 1, 3, 5, 8  | No external antenna jacks. At least one report of working on 2022.5. Ethernet clients worked fine, but there was very limited speed (~ 5MB/s) to wireless clients.  | | Alcatel | MW40V | Various  | LTE CAT4  |   |   | 1bbb:0195  | RNDIS  | MW41NF\\ FDD LTE: Band 1, 2, 3, 4, 5, 7, 8, 12, 13, 17, 27, 28\\ \\ UMTS: Band 1, 2, 4, 5, 8 \\  \\ GSM: Band 2, 3, 5, 8 \\ \\ MW41CL\\ FDD LTE: Band 1, 3, 5, 7, 8, 28. Compatible with Band 26 \\ \\ TDD LTE : Band 40 compatible with B38 \\ \\ UMTS Band 1, 3, 5, 8  | No external antenna jacks. At least one report of working on 2022.5. Ethernet clients worked fine, but there was very limited speed (~ 5MB/s) to wireless clients.  |
Line 12: Line 12:
 | Huawei  | E398  | Various  | LTE CAT3  |   | 12d1:1446  | 12d1:1506  | Serial and QMI  |   | Some versions have 1 antenna jack, and some have 2 jacks. In general this dongle works well, but sometimes the driver crashes because FreshTomato has problems with the //qmi_wwan// module. \\ Update: it seems that using ONLY the USB 1.1 driver fixes this issue in 90% of cases (at least on ARM routers).  | | Huawei  | E398  | Various  | LTE CAT3  |   | 12d1:1446  | 12d1:1506  | Serial and QMI  |   | Some versions have 1 antenna jack, and some have 2 jacks. In general this dongle works well, but sometimes the driver crashes because FreshTomato has problems with the //qmi_wwan// module. \\ Update: it seems that using ONLY the USB 1.1 driver fixes this issue in 90% of cases (at least on ARM routers).  |
 | Netgear | Aircard 791L | Verizon | LTE CAT6 | IS-2000 Release 0  |   |   |   | 4G LTE CA: Band 13, 44G \\   \\ LTE: Band 2, 3, 4, 7, 13 \\  \\ MTS/HSPA+ : 850/900/1900/2100 MHz \\  \\ CDMA 1X/EvDO/eHRPD: 800/1900 MHz \\  \\ GSM/GPRS/EDGE: 850/900/1800/1900 MHz | Features two TS-9 external antenna connectors. USB tethering worked well with Release 2022.5. | | Netgear | Aircard 791L | Verizon | LTE CAT6 | IS-2000 Release 0  |   |   |   | 4G LTE CA: Band 13, 44G \\   \\ LTE: Band 2, 3, 4, 7, 13 \\  \\ MTS/HSPA+ : 850/900/1900/2100 MHz \\  \\ CDMA 1X/EvDO/eHRPD: 800/1900 MHz \\  \\ GSM/GPRS/EDGE: 850/900/1800/1900 MHz | Features two TS-9 external antenna connectors. USB tethering worked well with Release 2022.5. |
-| Inseego (Novatel) | MiFi M 2000  | Various  | LTE CAT22  | n/a  | 12d1:1446  | 12d1:1506  | Serial and QMI  |   | Some versions of this have 1 antenna jack, and some have 2 jacks. In general this dongle works well, but sometimes the driver crashes because FreshTomato has problems with the //qmi_wwan// module. \\ Update: it seems that using ONLY USB 1.1 driver fixes this issue in 90% of cases (at least on ARM routers).  | +| Inseego (Novatel) | MiFi M 2000  | Various  | LTE CAT22  | HSPA+ /UMTS  | 1410:???  | 1410:????  | RNDIS  |   | Some versions of this have 1 antenna jack, and some have 2 jacks. In general this dongle works well, but sometimes the driver crashes because FreshTomato has problems with the //qmi_wwan// module. \\ Update: it seems that using ONLY USB 1.1 driver fixes this issue in 90% of cases (at least on ARM routers).  | 
-| Inseego | MiFi2100 | Verizon | LTE CAT22 |   |   |   |   | 5G mmWave and Sub6: n2, n5, n66, n260, n261 \\  \\ 4G LTE CAT 22: Band 1, 2, 3, 4, 5, 7, 12, 13, 14, 17, 20, 28, 46, 48, 66 \\  \\ 4x4 MIMO Sub6, 2x2 MIMO mm \\  \\ 256 QAM Sub6, 64 QAM mmW |   |+| Inseego | MiFi2100 | Verizon | LTE CAT22 | HSPA+ /UMTS  | 1410:b010  | 1410:b010  | RNDIS  | 5G mmWave and Sub6: n2, n5, n66, n260, n261 \\  \\ 4G LTE CAT 22: Band 1, 2, 3, 4, 5, 7, 12, 13, 14, 17, 20, 28, 46, 48, 66 \\  \\ 4x4 MIMO Sub6, 2x2 MIMO mm \\  \\ 256 QAM Sub6, 64 QAM mmW |   |
 | Netgear | Aircard 791L | Verizon | LTE CAT6 | IS-2000 Release 0 |   |   |   | 4G LTE CA: Band 13, 44 \\ 4G  LTE: Band 2, 3, 4, 7, 13 \\  \\ MTS/HSPA+ : 850/900/1900/2100 MHz \\  \\ CDMA 1X/EvDO/eHRPD: 800/1900 MHz   \\  \\ GSM/GPRS/EDGE: 850/900/1800/1900 MHz |   | | Netgear | Aircard 791L | Verizon | LTE CAT6 | IS-2000 Release 0 |   |   |   | 4G LTE CA: Band 13, 44 \\ 4G  LTE: Band 2, 3, 4, 7, 13 \\  \\ MTS/HSPA+ : 850/900/1900/2100 MHz \\  \\ CDMA 1X/EvDO/eHRPD: 800/1900 MHz   \\  \\ GSM/GPRS/EDGE: 850/900/1800/1900 MHz |   |
-| Novatel | MiFi2200  | Various  | LTE CAT3  | CDMA EV-DO Rev.A  | 1410:5030 | 1410:6000 | Serial and QMI  |   | ** Editing still in progress.  | +| Novatel | MiFi2200  | Various  | LTE CAT3  | CDMA EV-DO Rev.A  | 1410:5030 | 1410:6000 | Serial and QMI  | -DELETE ME-  | ** Editing still in progress.  | 
-| Novatel | MiFi6620 | Verizon | LTE |   |   |   |   | LTE Band 13/4 \\ \\ EDGE/GSM: 850/900/1800/1900)  \\  \\ HSPA/UMTS: 850/900/1900/2100) | Worked well in tethered mode with Release 2022.5. It's recommended that you use a LAN subnet other than the one(s) configured in FreshTomato to reduce conflicts. |+| Novatel | MiFi6620 | Verizon | LTE | CDMA  | 1410:????  | 1410:????  | CDC-ECM?  | LTE Band 13/4 \\ \\ EDGE/GSM: 850/900/1800/1900)  \\  \\ HSPA/UMTS: 850/900/1900/2100) | Worked well in tethered mode with Release 2022.5. It's recommended that you use a LAN subnet other than the one(s) configured in FreshTomato to reduce conflicts. |
 | Left blank intentionally  | Left blank intentionally  |   |   |   |   | Left blank intentionally  |   |   | Left blank intentionally for future Novatel entries  | | Left blank intentionally  | Left blank intentionally  |   |   |   |   | Left blank intentionally  |   |   | Left blank intentionally for future Novatel entries  |
-| Novatel (now Inseego)  | USB730L  | Verizon | LTE CAT6 | HSDPA 7.2 |   | 1410:9030  | Serial and RNDIS  | US LTE Bands: B2/B4/B5/B13\\ \\ Global LTE Bands: B3/B4 \\ \\ LTE-U Carrier Aggregation: 13+4, 13+2 \\ \\ CDMA EV-DO rA: BC0/BC1 \\ \\ Quad band: UMTS/HSPA B1/B2/B5/B8 \\ \\ Quad band: GPRS/EDGE Band 1, 3, 5, 8  | Not yet supported.  | +| Novatel (now Inseego)  | USB730L  | Verizon | LTE CAT6 | HSDPA 7.2 | 1410:9030  | 1410:9032  | RNDIS /CDC-ECM  | US LTE Bands: B2/B4/B5/B13\\ \\ Global LTE Bands: B3/B4 \\ \\ LTE-U Carrier Aggregation: 13+4, 13+2 \\ \\ CDMA EV-DO rA: BC0/BC1 \\ \\ Quad band: UMTS/HSPA B1/B2/B5/B8 \\ \\ Quad band: GPRS/EDGE Band 1, 3, 5, 8  | Not yet supported.  | 
-| Inseego  | USB800  | AT&T | LTE CAT18 |   |   | 1410:B023  | Serial and RNDIS  | 4G LTE: Band 1, 2, 3, 4, 5, 7, 12, 13, 14, 17, 18, 20, 28, 29, 30, 66 \\ \\ HSPA+/UMTS: Band 1, 2, 4, 5, 8 \\ \\ Carrier Aggregation:  5 CC Download CA | Not yet supported.This modem uses a series of 5 Vendor IDs, each for different functions. The ID listed in the Vendor ID column is for the modem itself.  |+| Inseego  | USB800  | AT&T | LTE CAT18 | HSPA+ / UMTS  | 1410:B020  | 1410:B023  | RNDIS  | 4G LTE: Band 1, 2, 3, 4, 5, 7, 12, 13, 14, 17, 18, 20, 28, 29, 30, 66 \\ \\ HSPA+/UMTS: Band 1, 2, 4, 5, 8 \\ \\ Carrier Aggregation:  5 CC Download CA | Not yet supported.This modem uses a series of 5 Vendor IDs, each for different functions. The ID listed in the Vendor ID column is for the modem itself.  |
 | ZTE | MF833U1 |   | LTE CAT4  |   |   |   |   | LTE-FDD: Band 1, 3, 5, 7, 8, 20, 28  \\  \\ LTE-TDD: Band 38, 39, 40, 41  \\  \\ DC-HSPA+/HSPA/UMTS: Band 1,2, 5, 8 \\  \\ \\ GSM: 850/900/1800/1900 MHz  |   | | ZTE | MF833U1 |   | LTE CAT4  |   |   |   |   | LTE-FDD: Band 1, 3, 5, 7, 8, 20, 28  \\  \\ LTE-TDD: Band 38, 39, 40, 41  \\  \\ DC-HSPA+/HSPA/UMTS: Band 1,2, 5, 8 \\  \\ \\ GSM: 850/900/1800/1900 MHz  |   |
 | ZTE  | MF923  | AT&T  | LTE CAT4  |   |   |   |   | LTE: B2/B4/B5/B17/B29 \\ \\ 4G HSPA+ : 850/1900/2100 MHz \\ \\ 3G UMTS: 850/1900/2100 MHz  | This mobile hotspot was tested as working when connected to the USB port of a Netgear WNDR3400v1.The Micro USB port of this device receives power input from the router, so the hotspot can be powered that way. Caution is advised, as not all routers are designed to output adequate USB power for a device such as this. Overheating might be possible.  | | ZTE  | MF923  | AT&T  | LTE CAT4  |   |   |   |   | LTE: B2/B4/B5/B17/B29 \\ \\ 4G HSPA+ : 850/1900/2100 MHz \\ \\ 3G UMTS: 850/1900/2100 MHz  | This mobile hotspot was tested as working when connected to the USB port of a Netgear WNDR3400v1.The Micro USB port of this device receives power input from the router, so the hotspot can be powered that way. Caution is advised, as not all routers are designed to output adequate USB power for a device such as this. Overheating might be possible.  |
dongle_compatibility.txt · Last modified: 2023/11/12 23:09 by hogwild

Page Tools

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki