Differences

This shows you the differences between two versions of the page.

--- dongle_compatibility [2022/09/17 16:58] – - Formatting change to AC791L bands hogwild
+++ dongle_compatibility [2024/04/28 16:50] (current) – -formatting hogwild
@@ Line 1: / Line 1: @@
-===== 3G/4G/5G Modem/Hotspot Compatibility =====
+===== 3G/4G/5G Dongle compatibility =====
 <sortable>
-^  Manufacturer  ^  Model  ^  Vendor  ^  4G Standard  ^  3G Standard  ^  Default Id  ^  Modem Id  ^  Protocol  ^  Bands supported  ^  Comments  ^
+^  Manufacturer  ^  Model  ^  Vendor  ^  4G Standard  ^  3G Standard  ^  Default Id  ^  Modem ID  ^  DefaultProtocol  ^  Bands supported  ^  Comments  ^
-| Alcatel | Link Key IK40V | Various  | LTE CAT4  |   |   | 1d6b:0195 (Czech T-Mobile)  | RNDIS  | 4G LTE FDD: Band 1, 4, 7, 8, 20 \\ \\ HSDPA/HSUPA: 900/1800/2100 MHz \\ \\ EDGE/GPRS: 850/900/1800/1900 MHz  | Works well. No external antenna jacks. This is the lead developer's 4G test modem when he uses the RNDIS protocol: [[https://bitbucket.org/pedro311/freshtomato-arm/commits/453542154d55df6b2a172443564e0a6fdc0a3286|link]] |
+| Alcatel | Link Key IK40V | Various  | LTE CAT4  |   |   | 1d6b:0195 (Czech T-Mobile)  | RNDIS  | 4G LTE FDD: Band 1, 4, 7, 8, 20 \\ \\ HSDPA/HSUPA: 900/1800/2100 MHz \\ \\ EDGE/GPRS: 850/900/1800/1900 MHz  | Works well. No external antenna jacks. The lead developer uses this as 4G test modem with RNDIS protocol: [[https://bitbucket.org/pedro311/freshtomato-arm/commits/453542154d55df6b2a172443564e0a6fdc0a3286|link]]\\ Note: the modem's address is 192.168.1.1, so you should change the router's address to make it work. |
-| Alcatel | MW40V | Various  | LTE CAT4  |   |   | 1bbb:0195  | RNDIS  | MW41NF\\ FDD LTE: Band 1, 2, 3, 4, 5, 7, 8, 12, 13, 17, 27, 28\\ \\ UMTS: Band 1, 2, 4, 5, 8 \\  \\ GSM: Band 2, 3, 5, 8 \\ \\ MW41CL\\ FDD LTE: Band 1, 3, 5, 7, 8, 28. Compatible with Band 26 \\ \\ TDD LTE : Band 40 compatible with B38 \\ \\ UMTS Band 1, 3, 5, 8  | No external antenna jacks. At least one report of working on 2022.5. Ethernet clients worked fine, but there was very limited speed (~ 5MB/s) to wireless clients.  |
+| Alcatel | MW40V | Various  | LTE CAT4  |   |   | 1bbb:0195  | RNDIS  | MW41NF\\ FDD LTE: Band 1, 2, 3, 4, 5, 7, 8, 12, 13, 17, 27, 28\\ \\ UMTS: Band 1, 2, 4, 5, 8 \\  \\ GSM: Band 2, 3, 5, 8 \\ \\ MW41CL\\ FDD LTE: Band 1, 3, 5, 7, 8, 28. Compatible with Band 26 \\ \\ TDD LTE : Band 40 compatible with B38 \\ \\ UMTS Band 1, 3, 5, 8  | No external antenna jacks. At least one report that it works on 2022.5. Ethernet clients worked fine but there was limited speed (~ 5Mb/s) to WiFi clients.  The modem's IP address is 192.168.1.1, so you should change the router's address to make it work.  |
-| Android (smartphones) | Various | Various | Depends on phone  | Depends on phone  | Depends on phone  | Depends on phone  | RNDIS  | Depends on phone  | At least 8 models of Android smartphones have been reported to work in USB tether mode. So far, these include the Samsung Galaxy A3 2015, Samsung Galaxy S7, Samsung Galaxy S8 Plus, Samsung Galaxy S10, Samsung Galaxy S21 Ultra, and ZTE Blade A7 Prime. |
+| Android (smartphones) | Various | Various | Depends on phone  | Depends on phone  | Depends on phone  | Depends on phone  | RNDIS  | Depends on phone  | At least 8 models reported working in USB tether mode. These include the Samsung Galaxy A3 2015, Samsung Galaxy S7, Samsung Galaxy S8 Plus, Samsung Galaxy S10, Samsung Galaxy S21 Ultra, and ZTE Blade A7 Prime. |
-| Huawei | E3372 \\ (h and s) Non-Hilink | Various | LTE CAT4  | UMTS  | 12d1:1f01  | 12d1:14d  | ECM  | 4G: Band 1, 3, 7, 8, 20\\ \\ 3G UMTS: 900/2100 MHz  | Has 2 external antenna jacks. Works well with FreshTomato.Note that there are at least 6 versions of the E3372.  |
+| Huawei | E3372H-153 \\ (h and s) Non-Hilink | LMT (Latvia Mobile) | LTE CAT4  | UMTS  | 12d1:1f01  | 12d1:14d  | ECM  | 4G: Band 1, 3, 7, 8, 20\\ \\ 3G UMTS: 900/2100 MHz  | Has 2 external antenna jacks. Works well. There are at least 6 versions of E3372 chips, so check model number carefully. This version was from Latvia Mobile.  |
-| Huawei  | E3372 \\ (h and s) Hilink  | Various  | LTE CAT4  |   |   | 12d1:14dc  | ECM  | 4G: Band 1, 3, 7, 8, 20\\ \\ 3G UMTS: 900/2100 MHz  | This is the same hardware as the above modem, but this model has problems with some sites (~30%) due to a bug in the Broadcom driver. However, you can switch from Hilink to non-Hilink and vice versa by uploading the appropriate firmware found here: [[https://www.mediafire.com/folder/ll9ieqqooyhy5/Documents#ll9ieqqooyhy5|found here.]] \\ \\ See [[https://www.0xf8.org/2017/01/flashing-a-huawei-e3372h-4g-lte-stick-from-hilink-to-stick-mode/|here]] for details.Note that there are at least 6 versions of the E3372. |
+| Huawei | E3372H | Megafon | LTE CAT4 | UMTS | 12d1:14fe  | 12d1:1506  | ECM  | 4G: Band 1, 3, 7, 8, 20\\ \\ 3G UMTS: 900/2100 MHz  | Has 2 external antenna jacks. Works well.  |
-| Huawei  | E398  | Various  | LTE CAT3  |   | 12d1:1446  | 12d1:1506  | Serial and QMI  |   | Some versions have 1 antenna jack, and some have 2 jacks. In general this dongle works well, but sometimes the driver crashes because FreshTomato has problems with the //qmi_wwan// module. \\ Update: it seems that using ONLY the USB 1.1 driver fixes this issue in 90% of cases (at least on ARM routers).  |
+| Huawei  | E3372 \\ (h and s) Hilink  | Various  | LTE CAT4  |   |   | 12d1:14dc  | ECM  | 4G: Band 1, 3, 7, 8, 20\\ \\ 3G UMTS: 900/2100 MHz  | Same hardware as above modem, but has problems with  ~ 30% of sites due to a Broadcom driver bug. However, you can switch from Hilink to non-Hilink and back by flashing the appropriate firmware: [[https://www.mediafire.com/folder/ll9ieqqooyhy5/Documents#ll9ieqqooyhy5|found here.]] \\ \\ See [[https://www.0xf8.org/2017/01/flashing-a-huawei-e3372h-4g-lte-stick-from-hilink-to-stick-mode/|here]] for details. \\  There are at least 6 versions of the E3372 chips. Check model carefully. |
-| Netgear | Aircard 791L | Verizon | LTE CAT6 | IS-2000 Release 0  |   |   |   | 4G LTE CA: Band 13, 44G \\   \\ LTE: Band 2, 3, 4, 7, 13 \\  \\ MTS/HSPA+ : 850/900/1900/2100 MHz \\  \\ CDMA 1X/EvDO/eHRPD: 800/1900 MHz \\  \\ GSM/GPRS/EDGE: 850/900/1800/1900 MHz | Features two TS-9 external antenna connectors. USB tethering worked well with Release 2022.5. |
+| Huawei  | E398  | Various  | LTE CAT3  |   | 12d1:1446  | 12d1:1506  | Serial and QMI  |   | Some versions have 1 antenna jack, and some have 2. In general this dongle works well, but sometimes the driver crashes as FreshTomato has problems with the //qmi_wwan// module. \\ Using ONLY USB 1.1 fixes this issue in 90% of cases on ARM routers.  |
-| Inseego (Novatel) | MiFi M 2000  | Various  | LTE CAT22  | n/a  | 12d1:1446  | 12d1:1506  | Serial and QMI  |   | Some versions of this have 1 antenna jack, and some have 2 jacks. In general this dongle works well, but sometimes the driver crashes because FreshTomato has problems with the //qmi_wwan// module. \\ Update: it seems that using ONLY USB 1.1 driver fixes this issue in 90% of cases (at least on ARM routers).  |
+| Netgear | Aircard 791L | Verizon | LTE CAT6 | IS-2000 Release 0  |   |   |   | 4G LTE CA: Band 13, 44G \\   \\ LTE: Band 2, 3, 4, 7, 13 \\  \\ MTS/HSPA+ : 850/900/1900/2100 MHz \\  \\ CDMA 1X/EvDO/eHRPD: 800/1900 MHz \\  \\ GSM/GPRS/EDGE: 850/900/1800/1900 MHz | Features two TS-9 external antenna connectors. USB tethering worked well with 2022.5. |
-| Inseego | MiFi2100 | Verizon | LTE CAT22 |   |   |   |   | 5G mmWave and Sub6: n2, n5, n66, n260, n261 \\  \\ 4G LTE CAT 22: Band 1, 2, 3, 4, 5, 7, 12, 13, 14, 17, 20, 28, 46, 48, 66 \\  \\ 4x4 MIMO Sub6, 2x2 MIMO mm \\  \\ 256 QAM Sub6, 64 QAM mmW |   |
+| Inseego (Novatel) | MiFi M 2000  | Various  | LTE CAT22  | HSPA+ /UMTS  | 1410:???  | 1410:????  | RNDIS  |   | Some versions have 1 antenna jack and some have 2. In general, this works well, but sometimes the driver crashes, as FreshTomato has problems with the //qmi_wwan// module. \\ Using ONLY USB 1.1 fixes this issue in 90% of cases on ARM routers.  |
+| Inseego | MiFi2100 | Verizon | LTE CAT22 | HSPA+ /UMTS  | 1410:b010  | 1410:b010  | RNDIS  | 5G mmWave and Sub6: n2, n5, n66, n260, n261 \\  \\ 4G LTE CAT 22: Band 1, 2, 3, 4, 5, 7, 12, 13, 14, 17, 20, 28, 46, 48, 66 \\  \\ 4x4 MIMO Sub6, 2x2 MIMO mm \\  \\ 256 QAM Sub6, 64 QAM mmW |   |
 | Netgear | Aircard 791L | Verizon | LTE CAT6 | IS-2000 Release 0 |   |   |   | 4G LTE CA: Band 13, 44 \\ 4G  LTE: Band 2, 3, 4, 7, 13 \\  \\ MTS/HSPA+ : 850/900/1900/2100 MHz \\  \\ CDMA 1X/EvDO/eHRPD: 800/1900 MHz   \\  \\ GSM/GPRS/EDGE: 850/900/1800/1900 MHz |   |
-| Novatel | MiFi2200  | Various  | LTE CAT3  | CDMA EV-DO Rev.A  | 1410:5030 | 1410:6000 | Serial and QMI  |   | ** Editing still in progress.  |
+| Novatel | MiFi2200  | Various  | LTE CAT3  | CDMA EV-DO Rev.A  | 1410:5030 | 1410:6000 | Serial and QMI  | -DELETE ME-  | ** Editing still in progress.  |
-| Novatel | MiFi6620 | Verizon | LTE |   |   |   |   | LTE Band 13/4 \\ \\ EDGE/GSM: 850/900/1800/1900)  \\  \\ HSPA/UMTS: 850/900/1900/2100) | Worked well with Release 2022.5.Use a LAN subnet other than the one(s) configured in FreshTomato to reduce conflicts. |
+| Novatel | MiFi6620 | Verizon | LTE | CDMA  | 1410:????  | 1410:????  | CDC-ECM?  | LTE Band 13/4 \\ \\ EDGE/GSM: 850/900/1800/1900)  \\  \\ HSPA/UMTS: 850/900/1900/2100) | Worked well in tether mode with 2022.5. Use a LAN subnet other than the one(s) configured in FreshTomato to reduce conflicts. |
-| Left blank intentionally  | Left blank intentionally  |   |   |   |   | Left blank intentionally  |   |   | Left blank intentionally for future Novatel entries  |
+| Left blank intentionally  | Left blank intentionally  |   |   |   |   | Left blank intentionally  |   |   | Left blank intentionally for future entries  |
-| Novatel (now Inseego)  | USB730L  | Verizon | LTE CAT6 | HSDPA 7.2 |   | 1410:9030  | Serial and RNDIS  | US LTE Bands: B2/B4/B5/B13\\ \\ Global LTE Bands: B3/B4 \\ \\ LTE-U Carrier Aggregation: 13+4, 13+2 \\ \\ CDMA EV-DO rA: BC0/BC1 \\ \\ Quad band: UMTS/HSPA B1/B2/B5/B8 \\ \\ Quad band: GPRS/EDGE Band 1, 3, 5, 8  | Not yet supported.  |
+| Novatel (now Inseego)  | USB730L  | Verizon | LTE CAT6 | HSDPA 7.2 | 1410:9030  | 1410:9032  | RNDIS /CDC-ECM  | US LTE Bands: B2/B4/B5/B13\\ \\ Global LTE Bands: B3/B4 \\ \\ LTE-U Carrier Aggregation: 13+4, 13+2 \\ \\ CDMA EV-DO rA: BC0/BC1 \\ \\ Quad band: UMTS/HSPA B1/B2/B5/B8 \\ \\ Quad band: GPRS/EDGE Band 1, 3, 5, 8  | Not yet supported.  |
-| Inseego  | USB800  | AT&T | LTE CAT18 |   |   | 1410:B023  | Serial and RNDIS  | 4G LTE: Band 1, 2, 3, 4, 5, 7, 12, 13, 14, 17, 18, 20, 28, 29, 30, 66 \\ \\ HSPA+/UMTS: Band 1, 2, 4, 5, 8 \\ \\ Carrier Aggregation:  5 CC Download CA | Not yet supported.This modem uses a series of 5 Vendor IDs, each for different functions. The ID listed in the Vendor ID column is for the modem itself.  |
+| Inseego  | USB800  | AT&T | LTE CAT18 | HSPA+ / UMTS  | 1410:B020  | 1410:B023  | RNDIS  | 4G LTE: Band 1, 2, 3, 4, 5, 7, 12, 13, 14, 17, 18, 20, 28, 29, 30, 66 \\ \\ HSPA+/UMTS: Band 1, 2, 4, 5, 8 \\ \\ Carrier Aggregation:  5 CC Download CA | Not yet supported. This modem uses 5 Vendor IDs for various functions. The ID listed here is the Vendor ID for the modem itself.  |
 | ZTE | MF833U1 |   | LTE CAT4  |   |   |   |   | LTE-FDD: Band 1, 3, 5, 7, 8, 20, 28  \\  \\ LTE-TDD: Band 38, 39, 40, 41  \\  \\ DC-HSPA+/HSPA/UMTS: Band 1,2, 5, 8 \\  \\ \\ GSM: 850/900/1800/1900 MHz  |   |
-| ZTE  | MF923  | AT&T  | LTE CAT4  |   |   |   |   | LTE: B2/B4/B5/B17/B29 \\ \\ 4G HSPA+ : 850/1900/2100 MHz \\ \\ 3G UMTS: 850/1900/2100 MHz  | This mobile hotspot was tested as working when connected to the USB port of a Netgear WNDR3400v1.The Micro USB port of this device receives power input from the router, so the hotspot can be powered that way. Caution is advised, as not all routers are designed to output adequate USB power for a device such as this. Overheating might be possible.  |
+| ZTE  | MF923  | AT&T  | LTE CAT4  |   |   |   |   | LTE: B2/B4/B5/B17/B29 \\ \\ 4G HSPA+ : 850/1900/2100 MHz \\ \\ 3G UMTS: 850/1900/2100 MHz  | This tested as working with a Netgear WNDR3400v1. This device gets its power from the router's USB port. Not all routers can provide enough USB power. Overheating is possible.  |
 |   |   |   |   |   |   |   |   |   |   |

FreshTomato Wiki

User Tools

Site Tools

Differences

Page Tools