Site Tools


dongle_compatibility

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
dongle_compatibility [2024/04/28 16:47] – -condense comments hogwilddongle_compatibility [2024/04/28 16:50] (current) – -formatting hogwild
Line 9: Line 9:
 | Huawei | E3372H-153 \\ (h and s) Non-Hilink | LMT (Latvia Mobile) | LTE CAT4  | UMTS  | 12d1:1f01  | 12d1:14d  | ECM  | 4G: Band 1, 3, 7, 8, 20\\ \\ 3G UMTS: 900/2100 MHz  | Has 2 external antenna jacks. Works well. There are at least 6 versions of E3372 chips, so check model number carefully. This version was from Latvia Mobile.  | | Huawei | E3372H-153 \\ (h and s) Non-Hilink | LMT (Latvia Mobile) | LTE CAT4  | UMTS  | 12d1:1f01  | 12d1:14d  | ECM  | 4G: Band 1, 3, 7, 8, 20\\ \\ 3G UMTS: 900/2100 MHz  | Has 2 external antenna jacks. Works well. There are at least 6 versions of E3372 chips, so check model number carefully. This version was from Latvia Mobile.  |
 | Huawei | E3372H | Megafon | LTE CAT4 | UMTS | 12d1:14fe  | 12d1:1506  | ECM  | 4G: Band 1, 3, 7, 8, 20\\ \\ 3G UMTS: 900/2100 MHz  | Has 2 external antenna jacks. Works well.  | | Huawei | E3372H | Megafon | LTE CAT4 | UMTS | 12d1:14fe  | 12d1:1506  | ECM  | 4G: Band 1, 3, 7, 8, 20\\ \\ 3G UMTS: 900/2100 MHz  | Has 2 external antenna jacks. Works well.  |
-| Huawei  | E3372 \\ (h and s) Hilink  | Various  | LTE CAT4  |     | 12d1:14dc  | ECM  | 4G: Band 1, 3, 7, 8, 20\\ \\ 3G UMTS: 900/2100 MHz  | Same hardware as above modem, but has problems with  ~ 30% of sites due to a Broadcom driver bug. However, you can switch from Hilink to non-Hilink and back by flashing the appropriate firmware: [[https://www.mediafire.com/folder/ll9ieqqooyhy5/Documents#ll9ieqqooyhy5|found here.]] \\ \\ See [[https://www.0xf8.org/2017/01/flashing-a-huawei-e3372h-4g-lte-stick-from-hilink-to-stick-mode/|here]] for details. There are at least 6 versions of the E3372 chips. Check model carefully. |+| Huawei  | E3372 \\ (h and s) Hilink  | Various  | LTE CAT4  |     | 12d1:14dc  | ECM  | 4G: Band 1, 3, 7, 8, 20\\ \\ 3G UMTS: 900/2100 MHz  | Same hardware as above modem, but has problems with  ~ 30% of sites due to a Broadcom driver bug. However, you can switch from Hilink to non-Hilink and back by flashing the appropriate firmware: [[https://www.mediafire.com/folder/ll9ieqqooyhy5/Documents#ll9ieqqooyhy5|found here.]] \\ \\ See [[https://www.0xf8.org/2017/01/flashing-a-huawei-e3372h-4g-lte-stick-from-hilink-to-stick-mode/|here]] for details. \\  There are at least 6 versions of the E3372 chips. Check model carefully. |
 | Huawei  | E398  | Various  | LTE CAT3  |   | 12d1:1446  | 12d1:1506  | Serial and QMI  |   | Some versions have 1 antenna jack, and some have 2. In general this dongle works well, but sometimes the driver crashes as FreshTomato has problems with the //qmi_wwan// module. \\ Using ONLY USB 1.1 fixes this issue in 90% of cases on ARM routers.  | | Huawei  | E398  | Various  | LTE CAT3  |   | 12d1:1446  | 12d1:1506  | Serial and QMI  |   | Some versions have 1 antenna jack, and some have 2. In general this dongle works well, but sometimes the driver crashes as FreshTomato has problems with the //qmi_wwan// module. \\ Using ONLY USB 1.1 fixes this issue in 90% of cases on ARM routers.  |
 | Netgear | Aircard 791L | Verizon | LTE CAT6 | IS-2000 Release 0  |       | 4G LTE CA: Band 13, 44G \\   \\ LTE: Band 2, 3, 4, 7, 13 \\  \\ MTS/HSPA+ : 850/900/1900/2100 MHz \\  \\ CDMA 1X/EvDO/eHRPD: 800/1900 MHz \\  \\ GSM/GPRS/EDGE: 850/900/1800/1900 MHz | Features two TS-9 external antenna connectors. USB tethering worked well with 2022.5. | | Netgear | Aircard 791L | Verizon | LTE CAT6 | IS-2000 Release 0  |       | 4G LTE CA: Band 13, 44G \\   \\ LTE: Band 2, 3, 4, 7, 13 \\  \\ MTS/HSPA+ : 850/900/1900/2100 MHz \\  \\ CDMA 1X/EvDO/eHRPD: 800/1900 MHz \\  \\ GSM/GPRS/EDGE: 850/900/1800/1900 MHz | Features two TS-9 external antenna connectors. USB tethering worked well with 2022.5. |
Line 19: Line 19:
 | Left blank intentionally  | Left blank intentionally  |         | Left blank intentionally  |     | Left blank intentionally for future entries  | | Left blank intentionally  | Left blank intentionally  |         | Left blank intentionally  |     | Left blank intentionally for future entries  |
 | Novatel (now Inseego)  | USB730L  | Verizon | LTE CAT6 | HSDPA 7.2 | 1410:9030  | 1410:9032  | RNDIS /CDC-ECM  | US LTE Bands: B2/B4/B5/B13\\ \\ Global LTE Bands: B3/B4 \\ \\ LTE-U Carrier Aggregation: 13+4, 13+2 \\ \\ CDMA EV-DO rA: BC0/BC1 \\ \\ Quad band: UMTS/HSPA B1/B2/B5/B8 \\ \\ Quad band: GPRS/EDGE Band 1, 3, 5, 8  | Not yet supported.  | | Novatel (now Inseego)  | USB730L  | Verizon | LTE CAT6 | HSDPA 7.2 | 1410:9030  | 1410:9032  | RNDIS /CDC-ECM  | US LTE Bands: B2/B4/B5/B13\\ \\ Global LTE Bands: B3/B4 \\ \\ LTE-U Carrier Aggregation: 13+4, 13+2 \\ \\ CDMA EV-DO rA: BC0/BC1 \\ \\ Quad band: UMTS/HSPA B1/B2/B5/B8 \\ \\ Quad band: GPRS/EDGE Band 1, 3, 5, 8  | Not yet supported.  |
-| Inseego  | USB800  | AT&T | LTE CAT18 | HSPA+ / UMTS  | 1410:B020  | 1410:B023  | RNDIS  | 4G LTE: Band 1, 2, 3, 4, 5, 7, 12, 13, 14, 17, 18, 20, 28, 29, 30, 66 \\ \\ HSPA+/UMTS: Band 1, 2, 4, 5, 8 \\ \\ Carrier Aggregation:  5 CC Download CA | Not yet supported.This modem uses 5 Vendor IDs for different functions. The ID listed here is the Vendor ID for the modem itself.  |+| Inseego  | USB800  | AT&T | LTE CAT18 | HSPA+ / UMTS  | 1410:B020  | 1410:B023  | RNDIS  | 4G LTE: Band 1, 2, 3, 4, 5, 7, 12, 13, 14, 17, 18, 20, 28, 29, 30, 66 \\ \\ HSPA+/UMTS: Band 1, 2, 4, 5, 8 \\ \\ Carrier Aggregation:  5 CC Download CA | Not yet supported. This modem uses 5 Vendor IDs for various functions. The ID listed here is the Vendor ID for the modem itself.  |
 | ZTE | MF833U1 |   | LTE CAT4  |         | LTE-FDD: Band 1, 3, 5, 7, 8, 20, 28  \\  \\ LTE-TDD: Band 38, 39, 40, 41  \\  \\ DC-HSPA+/HSPA/UMTS: Band 1,2, 5, 8 \\  \\ \\ GSM: 850/900/1800/1900 MHz  |   | | ZTE | MF833U1 |   | LTE CAT4  |         | LTE-FDD: Band 1, 3, 5, 7, 8, 20, 28  \\  \\ LTE-TDD: Band 38, 39, 40, 41  \\  \\ DC-HSPA+/HSPA/UMTS: Band 1,2, 5, 8 \\  \\ \\ GSM: 850/900/1800/1900 MHz  |   |
 | ZTE  | MF923  | AT& | LTE CAT4  |         | LTE: B2/B4/B5/B17/B29 \\ \\ 4G HSPA+ : 850/1900/2100 MHz \\ \\ 3G UMTS: 850/1900/2100 MHz  | This tested as working with a Netgear WNDR3400v1. This device gets its power from the router's USB port. Not all routers can provide enough USB power. Overheating is possible.  | | ZTE  | MF923  | AT& | LTE CAT4  |         | LTE: B2/B4/B5/B17/B29 \\ \\ 4G HSPA+ : 850/1900/2100 MHz \\ \\ 3G UMTS: 850/1900/2100 MHz  | This tested as working with a Netgear WNDR3400v1. This device gets its power from the router's USB port. Not all routers can provide enough USB power. Overheating is possible.  |
dongle_compatibility.1714319241.txt.gz · Last modified: 2024/04/28 16:47 by hogwild