Site Tools


dongle_compatibility

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
dongle_compatibility [2025/05/01 16:35] – -Formatting hogwilddongle_compatibility [2025/06/05 16:45] (current) – -Condense hogwild
Line 4: Line 4:
  
 ^  Manufacturer  ^  Model  ^  Vendor  ^  4G Standard  ^  3G Standard  ^  Default Id  ^  Modem ID  ^  DefaultProtocol  ^  Bands supported  ^  Comments  ^ ^  Manufacturer  ^  Model  ^  Vendor  ^  4G Standard  ^  3G Standard  ^  Default Id  ^  Modem ID  ^  DefaultProtocol  ^  Bands supported  ^  Comments  ^
-| Alcatel | Link Key IK40V | Various  | LTE CAT4  |     | 1d6b:0195 (Czech T-Mobile)  | RNDIS  | 4G LTE FDD: Band 1, 4, 7, 8, 20 \\ \\ HSDPA/HSUPA: 900/1800/2100 MHz \\ \\ EDGE/GPRS: 850/900/1800/1900 MHz  | Works well. No external antenna jacks. The lead developer uses this as 4G test modem with RNDIS protocol: [[https://bitbucket.org/pedro311/freshtomato-arm/commits/453542154d55df6b2a172443564e0a6fdc0a3286|link]]\\ Note: the modem's address is 192.168.1.1, so you should change the router's address to make it work. |+| Alcatel | Link Key IK40V | Various  | LTE CAT4  |     | 1d6b:0195 (Czech T-Mobile)  | RNDIS  | 4G LTE FDD: Band 1, 4, 7, 8, 20 \\ \\ HSDPA/HSUPA: 900/1800/2100 MHz \\ \\ EDGE/GPRS: 850/900/1800/1900 MHz  | Works well. No external antenna jacks. The lead developer uses this as 4G test modem with RNDIS protocol: [[https://bitbucket.org/pedro311/freshtomato-arm/commits/453542154d55df6b2a172443564e0a6fdc0a3286|link]] \\ The modem's address is 192.168.1.1, so you should change the router's address to make it work. |
 | Alcatel | MW40V | Various  | LTE CAT4  |     | 1bbb:0195  | RNDIS  | MW41NF\\ FDD LTE: Band 1, 2, 3, 4, 5, 7, 8, 12, 13, 17, 27, 28\\ \\ UMTS: Band 1, 2, 4, 5, 8 \\  \\ GSM: Band 2, 3, 5, 8 \\ \\ MW41CL\\ FDD LTE: Band 1, 3, 5, 7, 8, 28. Compatible with Band 26 \\ \\ TDD LTE : Band 40 compatible with B38 \\ \\ UMTS Band 1, 3, 5, 8  | No external antenna jacks. At least one report that it works on 2022.5. Ethernet clients worked fine but there was limited speed (~ 5Mb/s) to WiFi clients.  The modem's IP address is 192.168.1.1, so you should change the router's address to make it work.  | | Alcatel | MW40V | Various  | LTE CAT4  |     | 1bbb:0195  | RNDIS  | MW41NF\\ FDD LTE: Band 1, 2, 3, 4, 5, 7, 8, 12, 13, 17, 27, 28\\ \\ UMTS: Band 1, 2, 4, 5, 8 \\  \\ GSM: Band 2, 3, 5, 8 \\ \\ MW41CL\\ FDD LTE: Band 1, 3, 5, 7, 8, 28. Compatible with Band 26 \\ \\ TDD LTE : Band 40 compatible with B38 \\ \\ UMTS Band 1, 3, 5, 8  | No external antenna jacks. At least one report that it works on 2022.5. Ethernet clients worked fine but there was limited speed (~ 5Mb/s) to WiFi clients.  The modem's IP address is 192.168.1.1, so you should change the router's address to make it work.  |
 | Android (smartphones) | Various | Various | Depends on phone  | Depends on phone  | Depends on phone  | Depends on phone  | RNDIS  | Depends on phone  | At least 8 models reported working in USB tether mode. These include the Samsung Galaxy A3 2015, Samsung Galaxy S7, Samsung Galaxy S8 Plus, Samsung Galaxy S10, Samsung Galaxy S21 Ultra, and ZTE Blade A7 Prime. | | Android (smartphones) | Various | Various | Depends on phone  | Depends on phone  | Depends on phone  | Depends on phone  | RNDIS  | Depends on phone  | At least 8 models reported working in USB tether mode. These include the Samsung Galaxy A3 2015, Samsung Galaxy S7, Samsung Galaxy S8 Plus, Samsung Galaxy S10, Samsung Galaxy S21 Ultra, and ZTE Blade A7 Prime. |
Line 17: Line 17:
 | Netgear | Aircard 797S | AT&T | LTE CAT 13  | DC-HSPA+  | 0846:68C0  |   | RNDIS/CDC ECM  | LTE: 850, 1900, 21001, 3, 7, 8, 20, 28, 38, 40  | Tested to work fine with a Netgear WNDR3700v and R6700v3. No external antenna jacks. | | Netgear | Aircard 797S | AT&T | LTE CAT 13  | DC-HSPA+  | 0846:68C0  |   | RNDIS/CDC ECM  | LTE: 850, 1900, 21001, 3, 7, 8, 20, 28, 38, 40  | Tested to work fine with a Netgear WNDR3700v and R6700v3. No external antenna jacks. |
 | Novatel | MiFi2200  | Various  | LTE CAT3  | CDMA EV-DO Rev.A  | 1410:5030 | 1410:6000 | Serial and QMI  | -DELETE ME-  | ** Editing still in progress.  | | Novatel | MiFi2200  | Various  | LTE CAT3  | CDMA EV-DO Rev.A  | 1410:5030 | 1410:6000 | Serial and QMI  | -DELETE ME-  | ** Editing still in progress.  |
-| Novatel | MiFi6620 | Verizon | LTE | CDMA  | 1410:????  | 1410:????  | CDC-ECM?  | LTE Band 13/4 \\ \\ EDGE/GSM: 850/900/1800/1900)  \\  \\ HSPA/UMTS: 850/900/1900/2100) | Worked well in tether mode with 2022.5. Use a LAN subnet other than those configured in FreshTomato to reduce conflicts. |+| Novatel | MiFi6620 | Verizon | LTE | CDMA  | 1410:????  | 1410:????  | CDC-ECM?  | LTE Band 13/4 \\ \\ EDGE/GSM: 850/900/1800/1900)  \\  \\ HSPA/UMTS: 850/900/1900/2100) | Tested as working fine in tether mode with 2022.5. Use a LAN subnet other than those configured in FreshTomato to reduce conflicts. |
 | Left blank intentionally  | Left blank intentionally  |         | Left blank intentionally  |     | Left blank intentionally for future entries  | | Left blank intentionally  | Left blank intentionally  |         | Left blank intentionally  |     | Left blank intentionally for future entries  |
 | Novatel (now Inseego)  | USB730L  | Verizon | LTE CAT6 | HSDPA 7.2 | 1410:9030  | 1410:9032  | RNDIS /CDC-ECM  | US LTE Bands: B2/B4/B5/B13\\ \\ Global LTE Bands: B3/B4 \\ \\ LTE-U Carrier Aggregation: 13+4, 13+2 \\ \\ CDMA EV-DO rA: BC0/BC1 \\ \\ Quad band: UMTS/HSPA B1/B2/B5/B8 \\ \\ Quad band: GPRS/EDGE Band 1, 3, 5, 8  | Not yet supported.  | | Novatel (now Inseego)  | USB730L  | Verizon | LTE CAT6 | HSDPA 7.2 | 1410:9030  | 1410:9032  | RNDIS /CDC-ECM  | US LTE Bands: B2/B4/B5/B13\\ \\ Global LTE Bands: B3/B4 \\ \\ LTE-U Carrier Aggregation: 13+4, 13+2 \\ \\ CDMA EV-DO rA: BC0/BC1 \\ \\ Quad band: UMTS/HSPA B1/B2/B5/B8 \\ \\ Quad band: GPRS/EDGE Band 1, 3, 5, 8  | Not yet supported.  |
 | Inseego  | USB800  | AT&T | LTE CAT18 | HSPA+ / UMTS  | 1410:B020  | 1410:B023  | RNDIS  | 4G LTE: Band 1, 2, 3, 4, 5, 7, 12, 13, 14, 17, 18, 20, 28, 29, 30, 66 \\ \\ HSPA+/UMTS: Band 1, 2, 4, 5, 8 \\ \\ Carrier Aggregation:  5 CC Download CA | Not yet supported. This modem uses 5 Vendor IDs for various functions. The ID listed here is the Vendor ID for the modem itself.  | | Inseego  | USB800  | AT&T | LTE CAT18 | HSPA+ / UMTS  | 1410:B020  | 1410:B023  | RNDIS  | 4G LTE: Band 1, 2, 3, 4, 5, 7, 12, 13, 14, 17, 18, 20, 28, 29, 30, 66 \\ \\ HSPA+/UMTS: Band 1, 2, 4, 5, 8 \\ \\ Carrier Aggregation:  5 CC Download CA | Not yet supported. This modem uses 5 Vendor IDs for various functions. The ID listed here is the Vendor ID for the modem itself.  |
 | ZTE | MF833U1 |   | LTE CAT4  |         | LTE-FDD: Band 1, 3, 5, 7, 8, 20, 28  \\  \\ LTE-TDD: Band 38, 39, 40, 41  \\  \\ DC-HSPA+/HSPA/UMTS: Band 1,2, 5, 8 \\  \\ \\ GSM: 850/900/1800/1900 MHz  |   | | ZTE | MF833U1 |   | LTE CAT4  |         | LTE-FDD: Band 1, 3, 5, 7, 8, 20, 28  \\  \\ LTE-TDD: Band 38, 39, 40, 41  \\  \\ DC-HSPA+/HSPA/UMTS: Band 1,2, 5, 8 \\  \\ \\ GSM: 850/900/1800/1900 MHz  |   |
-| ZTE  | MF923  | AT& | LTE CAT4  |         | LTE: B2/B4/B5/B17/B29 \\ \\ 4G HSPA+ : 850/1900/2100 MHz \\ \\ 3G UMTS: 850/1900/2100 MHz  | This tested as working with a Netgear WNDR3400v1.  This device gets its power from the router's USB port. Not all routers can provide enough USB power. Overheating is possible.  |+| ZTE  | MF923  | AT& | LTE CAT4  |         | LTE: B2/B4/B5/B17/B29 \\ \\ 4G HSPA+ : 850/1900/2100 MHz \\ \\ 3G UMTS: 850/1900/2100 MHz  | Tested as working well with a Netgear WNDR3400v1.  This device gets its power from the router's USB port. Not all routers can provide enough USB power. Overheating is possible.  |
 | Left blank intentionally  |                   | | Left blank intentionally  |                   |
 | ZTE  | MF985  | AT& | LTE CAT13/CAT12  | HSPA / UMTS  | 19D2:1405  |   | RNDIS  | LTE: Band 2, 4, 5, 12, 29, 30, and 66HSPA/UMTS: 850/1700/1900 MHz  | Tested to work fine with Netgear WNDR3700v and R6700v3.Includes external antenna jack.  | | ZTE  | MF985  | AT& | LTE CAT13/CAT12  | HSPA / UMTS  | 19D2:1405  |   | RNDIS  | LTE: Band 2, 4, 5, 12, 29, 30, and 66HSPA/UMTS: 850/1700/1900 MHz  | Tested to work fine with Netgear WNDR3700v and R6700v3.Includes external antenna jack.  |
dongle_compatibility.1746113759.txt.gz · Last modified: by hogwild