This is an old revision of the document!
Manufacturer | Model | Vendor | 4G Standard | 3G Standard | Default Id | Modem Id | Protocol | Bands supported | Comments |
---|---|---|---|---|---|---|---|---|---|
Alcatel | Link Key IK40V | Various | 1d6b:0195 (Czech T-Mobile) | 4G LTE FDD: 1/4/7/8/20 HSDPA/HSUPA: 900/1800/2100 MHz EDGE/GPRS: 850/900/1800/1900 MHz | Works well. No external antenna jacks. This is the lead developer's 4G test modem when he uses the RNDIS protocol: https://bitbucket.org/pedro311/freshtomato-arm/commits/453542154d55df6b2a172443564e0a6fdc0a3286). | ||||
Android (smartphones) | Various | Various | Depends on phone | Depends on phone | Depends on phone | Depends on phone | RNDIS | Depends on phone | At least 5 models of Android smartphones have been reported to work in USB tether mode. So far, these include the Samsung Galaxy S8 Plus, Samsung Galaxy S10, Samsung Galaxy S21 Ultra, and ZTE Blade A7 Prime. |
Huawei | E3372 (h and s) Non-Hilink | Various | LTE CAT 4 | 12d1:1f01 | 12d1:14d | ECM | 4G: 3G UMTS: 900/2100 MHz | Has 2 external antenna jacks. Works well. | |
Huawei | E3372 (h and s) Hilink | Various | LTE CAT 4 | 12d1:14dc | ECM | 4G: 3G UMTS: 900/2100 MHz | This model is the same hardware as the above modem. However, this model has problems with some sites (~30%) because of a bug in the Broadcom driver. However, you can switch from Hilink to non-Hilink and vice versa by uploading the appropriate firmware; found here: https://www.mediafire.com/folder/ll9ieqqooyhy5/Documents#ll9ieqqooyhy5 See this page for details:https://www.0xf8.org/2017/01/flashing-a-huawei-e3372h-4g-lte-stick-from-hilink-to-stick-mode/ |
||
Huawei | E398 | Various | 12d1:1446 | 12d1:1506 | Serial and QMI | Some versions of this have 1 antenna jack, and some have 2 jacks. In general this dongle works well, but sometimes the driver crashes because FreshTomato has problems with the qmi_wwan module. | |||
Novatel (now Inseego) | USB730l | Verizon | LTE | HSDPA 7.2 | 1410:9030 | Serial and RNDIS | CAT 6 LTE w/CA; CDMA EV-DO rA US LTE Bands: B2/B4/B5/B13 Global LTE Bands: B3/B4 LTE-U Carrier Aggregation: 13+4, 13+2 CDMA EV-DO rA: BC0/BC1 Quad band: UMTS/HSPA B1/B2/B5/B8 Quad band: GPRS/EDGE B2/B3/B5/B8 | Scheduled for 2022.1 | |
Inseego | USB800 | AT&T | LTE CAT 18 | 1410:B023 | Serial and RNDIS | LTE CAT 18, 480 Mbps LTE Max Throughput, CarrierAggregation (5CC download CA), 2×2 MIMO, sGPS capable Bands: B1/B2/B3/B4/B5/B7/B12/B13/B14/B17/B18/B20/B28/ B29/B30/B66HSPA+/UMTS: B1/B2/B4/B5/B8 | Scheduled for 2022.1 .This modem uses a series of 5 Vendor IDs, each for different fuctions. The ID listed in the Vendor ID column is for the modem itself. | ||
ZTE | MF923 | AT&T | LTE | LTE 2/4/5/17/294G HSPA+ 850/1900/2100 MHz3G UMTS 850/1900/2100 MHz | This mobile hotspot was tested as working when connected to the USB port of a Netgear WNDR3400v1.The Micro USB port of this device receives power input from the router, so the hotspot can be powered that way. Caution is advised, as not all routers are designed to output adequate USB power for a device such as this. Overheating might be possible. | ||||