FreshTomato Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Entware Installation and Usage ======

\\ [[https://entware.net/about.html|Entware]] is a software repository for network attached storage, routers and other embedded devices. [[http://bin.entware.net/armv7sf-k3.2/Packages.html|2500+ packages]] are available for different platforms. Entware packages are full versions of programs/commands found in common Linux distributions. You can expand upon the BusyBox versions of commands included with FreshTomato and install packages not already installed. This allows you to "//push the limits//" of your router.

For more details on how to use Entware, see: [[https://github.com/Entware/Entware/wiki#using-repo|The Entware Wiki]]

There you can also find current, in-depth instructions for installing Entware in FreshTomato: [[https://github.com/Entware/Entware/wiki/Install-on-TomatoUSB-and-FreshTomato#entware-on-freshtomato-and-other-tomatousb-forks|Entware on FreshTomato (and other TomatoUSB forks)]]

 \\ This example assumes you have a USB flash drive mounted at: /mnt/sda1. If you need more details about configuring USB storage, please see the [[nas-usb|USB Support]] menu.

 \\

First, create the opt folder and mount it:

 \\

<code ->
mkdir /mnt/sda1/opt
mount -o bind /mnt/sda1/opt /opt
</code>

 \\   \\  Then, you can run the installation command:  \\  \\

<code ->
/usr/sbin/entware-install.sh
</code>

 \\   \\ Finally, you can install the packages you want, for example:  \\  \\

<code ->
opkg update
opkg upgrade
opkg install htop
</code>

 \\

 \\

FreshTomato Wiki

User Tools

Site Tools

Page Tools