Differences

This shows you the differences between two versions of the page.

--- faq [2023/06/04 23:02] – [Netgear R-series] -added link to Installing FT HOWTO hogwild
+++ faq [2023/06/04 23:08] – [How do I Get a 3G/4G/5G USB modem to work?] -condense hogwild
@@ Line 181: / Line 181: @@
 Support for modem dongles in FreshTomato is a somewhat complex topic. However, here is some information to help you get your USB modem running.
-FreshTomato has functions to automate the process of installing/configuring 3G/4G/5G connected USB modems. However, those functions are limited. One limitation is that generally, the FreshTomato build on your router must contain the the Plug and Play VendorID and DeviceID of your modem. If it's not included, the modem may not be detected or configured properly.
+FreshTomato has functions to automate the process of installing/configuring 3G/4G/5G connected USB modems. However, those functions are limited. One limitation is that generally, the FreshTomato build on your router must contain the the Plug and Play VendorID (VID) and DeviceID (PID) of your modem. If it's not included, the modem may not be detected or configured correctly.
-First, check the [[dongle_compatibility|3G/4G/5G compatibility]] wiki page to see if your modem is supported in FreshTomato. Whenever possible, that page will also contain the modem's Vendor ID and Device ID(s).
+First, check the [[dongle_compatibility|3G/4G/5G compatibility]] page to see if FreshTomato supports your modem. When possible, that page will contain the modem's Vendor ID and Device ID(s).
 Next, in FreshTomato's [[nas-usb|USB Support]] menu, verify that USB support is enabled. Then, enable the //3G/4G USB modem support// option in that same menu.
-If you don't know the make/model of your router, connect it to your router and ensure USB Support and 3G/4G USB mode support are enabled, as above. Then log on to FreshTomato and use the lsusb command to check to if its output lists your modem's Vendor ID (make) and Product ID (model).
+If you don't know the make/model of your modem, connect it to your router and ensure USB Support and 3G/4G USB mode support are enabled. Then log on to FreshTomato and use the lsusb command to check to if its output lists your modem's Vendor ID (make) and Product ID (model).
-It is NOT recommended that to enable a PIN on the SIM card used in your modem. Doing so may prevent it from working.
+You should NOT enable a PIN on your modem's SIM card. Doing so may prevent it from working with FreshTomato.

FreshTomato Wiki

User Tools

Site Tools

Differences

Page Tools