FreshTomato Wiki

User Tools

Site Tools

Trace:
forward-triggered

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
forward-triggered [2024/10/09 23:00] – -Move screenshot under intro hogwildforward-triggered [2024/10/09 23:04] (current) – hogwild
Line 5: Line 5:
 With port triggering, an application on a LAN host initiates traffic towards the Internet. The Triggering function remembers the traffic pattern. When that same pattern is identified as incoming from the WAN, the appropriate inbound port-mapping occurs. Traffic is then allowed through and forwarded to the correct host/port. After a few minutes of inactivity, triggered ports are closed. With port triggering, an application on a LAN host initiates traffic towards the Internet. The Triggering function remembers the traffic pattern. When that same pattern is identified as incoming from the WAN, the appropriate inbound port-mapping occurs. Traffic is then allowed through and forwarded to the correct host/port. After a few minutes of inactivity, triggered ports are closed.
  
-The image below represents the default Triggered Port Forwarding page. \\  + \\ 
- \\  + 
-{{:c2ae33c96d07fbb1cbb67f1056c7aa8f.png?809}} +The image below represents the default Triggered Port Forwarding page. \\   \\  {{:c2ae33c96d07fbb1cbb67f1056c7aa8f.png?809}}  \\   \\ If enabled, this rule would make FreshTomato listen to any traffic from the LAN towards the Internet. If it found packets within the 3000-4000 port range which satisfied the matching criteria, it would automatically enable port forwarding inbound in the 5000-6000 port range towards the LAN IP address that originated the request. 
- \\  + 
- \\  + \\
-If this rule were enabled, FreshTomato would listen to any traffic from the LAN towards the Internet. If it found packets within the 3000-4000 port range which satisfied the matching criteria, it would automatically enable port forwarding inbound in the 5000-6000 port range towards the LAN IP address that originated the request.+
  
 **On:**  This enables and disables the Triggered Port Forwarding function. **On:**  This enables and disables the Triggered Port Forwarding function.
  
-**Protocol:  **Here, you can select which protocols are triggered through the ports being forwarded.+ \\ 
 + 
 +**Protocol:  **Here, select which protocols are triggered through the ports being forwarded. 
 + 
 + \\
  
   * TCP - Only TCP traffic will be triggered for those port numbers.   * TCP - Only TCP traffic will be triggered for those port numbers.
Line 20: Line 23:
   * Both - Both UDP and TCP traffic will be triggered for those port numbers.   * Both - Both UDP and TCP traffic will be triggered for those port numbers.
  
-\\+\\  \\ **Trigger Ports:**  Here, enter the outbound ports to be monitored.
  
-[[https://wiki.freshtomato.org/lib/exe/detail.php?id=triggered&media=c2ae33c96d07fbb1cbb67f1056c7aa8f.png|{{:c2ae33c96d07fbb1cbb67f1056c7aa8f.png?809}}]] + \\
- +
- \\ **Trigger Ports:**  Here, enter the outbound ports to be monitored.+
  
 **Forwarded Ports:**  Here, enter the port/s to be mapped when triggered. **Forwarded Ports:**  Here, enter the port/s to be mapped when triggered.
  
-**Description:**  This fields allows you to enter notes notes as a reminder or reference.+ \\ 
 + 
 +**Description:**  This fields lets you to enter notes notes as a reminder or reference.
  
  \\  \\
forward-triggered.1728511241.txt.gz · Last modified: 2024/10/09 23:00 by hogwild

Page Tools

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki