Differences

This shows you the differences between two versions of the page.

--- forward-triggered [2024/10/09 23:04] – -Condense, formatting, delete screenshot in old location hogwild
+++ forward-triggered [2024/10/09 23:04] (current) – hogwild
@@ Line 4: / Line 4: @@
 With port triggering, an application on a LAN host initiates traffic towards the Internet. The Triggering function remembers the traffic pattern. When that same pattern is identified as incoming from the WAN, the appropriate inbound port-mapping occurs. Traffic is then allowed through and forwarded to the correct host/port. After a few minutes of inactivity, triggered ports are closed.
+ \\
 The image below represents the default Triggered Port Forwarding page. \\   \\  {{:c2ae33c96d07fbb1cbb67f1056c7aa8f.png?809}}  \\   \\ If enabled, this rule would make FreshTomato listen to any traffic from the LAN towards the Internet. If it found packets within the 3000-4000 port range which satisfied the matching criteria, it would automatically enable port forwarding inbound in the 5000-6000 port range towards the LAN IP address that originated the request.
+ \\
 **On:**  This enables and disables the Triggered Port Forwarding function.

FreshTomato Wiki