Differences

This shows you the differences between two versions of the page.

--- freshtomato_zerotier [2023/04/21 11:58] – created szpunk
+++ freshtomato_zerotier [2023/04/22 21:25] – -formatting hogwild
@@ Line 1: / Line 1: @@
-ZeroTier lets you build modern, secure multi-point virtualized networks of almost any type. From robust peer-to-peer networking to multi-cloud mesh infrastructure, we enable global connectivity with the simplicity of a local network.
+====== Connecting FreshTomato to Zerotier ======
+ZeroTier lets you build modern, secure, multi-point virtualized networks of almost any type. From robust peer-to-peer networking to multi-cloud mesh infrastructure, you can achieve global connectivity as easily as setting up a local LAN.
-  * 1. Register an account on the [[https://www.zerotier.com/|Zerotier]] official website;
+  - Register an account on the Zerotier website. [[https://www.zerotier.com/|Zerotier]]
-  * 2. Create a network on [[https://my.zerotier.com/|ZeroTier Central]], note down the network ID;
+  - Create a network on [[https://my.zerotier.com/|ZeroTier Central]]
-  * 3. Use [[entware_installation_usage|Entware]] install zerotier (opkg install zerotier) on your router, if the router is mipsel based, the version of zerotier may very old(1.1.4？), and can not use some functions like ` join orbit`. You can download the newest version from: [[https://github.com/rampageX/arm-static-bins/raw/master/ZeroTierOne/1.10.6/mipsel/zerotier-one|ZeroTierOne 1.10.6 mipsel static-bin]], and replace the old one.
+  - Note down the network ID
-  * 4. Use this script to control zerotier (auto start zerotierone daemon and join the network, stop and unload tun etc..), remember replace your own NETWORK_ID in the script:
+  - Use [[entware_installation_usage|Entware]] to install Zerotier on your router (At the command line, type "opkg install zerotier").
+  - If your router is MIPS-based, the Zerotier version may be very old (~ 1.1.4). If so, it can't use some functions such as 'join orbit'. Download the newest version and [[https://github.com/rampageX/arm-static-bins/raw/master/ZeroTierOne/1.10.6/mipsel/zerotier-one|ZeroTierOne 1.10.6 mipsel static-bin]] and replace the old version.
+  - Use this script to control Zerotier (auto start zerotierone daemon, join the network, stop, unload tun etceera). Replace the NETWORK_ID in the script  with your own: \\  \\
 <code bash>
@@ Line 95: / Line 98: @@
 </code>
-  * 5. When zerotier run and join network success, go ZeroTier Central authorized the new device(this router), all done.
+. When zerotier runs and has joined the network, go to ZeroTier Central and uthorized the new device (this router). This completes the process.
-  * 6. Check the [[https://zerotier.atlassian.net/wiki/spaces/SD/overview?homepageId=163911|ZeroTier Knowledge Base]] for more info about zerotier.
+. Check the [[https://zerotier.atlassian.net/wiki/spaces/SD/overview?homepageId=163911|ZeroTier Knowledge Base]] for more info about zerotier.

FreshTomato Wiki

User Tools

Site Tools

Differences

Page Tools