Differences

This shows you the differences between two versions of the page.

--- freshtomato_zerotier [2023/04/21 18:33] – rs232
+++ freshtomato_zerotier [2023/05/28 05:46] (current) – -condense hogwild
@@ Line 1: / Line 1: @@
 ====== Connecting FreshTomato to Zerotier ======
-ZeroTier lets you build modern, secure multi-point virtualized networks of almost any type. From robust peer-to-peer networking to multi-cloud mesh infrastructure, we enable global connectivity with the simplicity of a local network.
+ZeroTier lets you build modern, secure, multi-point virtualized networks of almost any type. From robust peer-to-peer networking to multi-cloud mesh infrastructure, you can achieve global connectivity as easily as setting up a local LAN.
+ \\
-  * 1. Register an account on the [[https://www.zerotier.com/|Zerotier]] official website;
+  - Register an account on the Zerotier website. [[https://www.zerotier.com/|Zerotier]]
-  * 2. Create a network on [[https://my.zerotier.com/|ZeroTier Central]], note down the network ID;
+  - Create a network on [[https://my.zerotier.com/|ZeroTier Central]]
-  * 3. Use [[entware_installation_usage|Entware]] install zerotier (opkg install zerotier) on your router, if the router is mipsel based, the version of zerotier may very old(1.1.4？), and can not use some functions like ` join orbit`. You can download the newest version from: [[https://github.com/rampageX/arm-static-bins/raw/master/ZeroTierOne/1.10.6/mipsel/zerotier-one|ZeroTierOne 1.10.6 mipsel static-bin]], and replace the old one.
+  - Note down the network ID
-  * 4. Use this script to control zerotier (auto start zerotierone daemon and join the network, stop and unload tun etc..), remember replace your own NETWORK_ID in the script:
+  - Use [[entware_installation_usage|Entware]] to install Zerotier on your router. (At the command line, type "opkg install zerotier").
+  - If your router is MIPS-based, the Zerotier version may be very old (~ 1.1.4). If so, it can't use some functions such as 'join orbit'. \\ Download the newest version  [[https://github.com/rampageX/arm-static-bins/raw/master/ZeroTierOne/1.10.6/mipsel/zerotier-one|ZeroTierOne 1.10.6 mipsel static-bin]] and use it to replace the old version.
+  - Use the script below to control Zerotier operation. You can auto-start the daemon, join the network, stop, unload tun and more.
+  - (Replace the NETWORK_ID in this script with your own).
+ \\  \\
 <code bash>
@@ Line 97: / Line 103: @@
 </code>
-  * 5. When zerotier run and join network success, go ZeroTier Central authorized the new device(this router), all done.
+ \\
-  * 6. Check the [[https://zerotier.atlassian.net/wiki/spaces/SD/overview?homepageId=163911|ZeroTier Knowledge Base]] for more info about zerotier.
+ \\
+When zerotier runs and has finished joining the network, go to ZeroTier Central and authorize the new (router) device. This completes the setup process.
+Check the [[https://zerotier.atlassian.net/wiki/spaces/SD/overview?homepageId=163911|ZeroTier Knowledge Base]] for more info about Zerotier.
+ \\
+ \\

FreshTomato Wiki

User Tools

Site Tools

Differences

Page Tools