FreshTomato Wiki

User Tools

Site Tools

Trace:
hardware_compatibility

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
Next revisionBoth sides next revision
hardware_compatibility [2024/01/17 01:56] – Corrected Tenda AC15 to reflect that it only has 128 MB of RAM techie007hardware_compatibility [2024/05/03 15:25] – -condense notes. Standardize terminology, remove bolding, remove word: NOTE in them. hogwild
Line 6: Line 6:
  
 ^ Model  ^  Rev  ^ CPU Type ^ MHz ^ CPUs ^ LAN ^ USB2 ^ USB3 ^ WiFi ^ Flash ^ NVRAM ^ RAM ^ Build (SDK) ^ Notes ^ ^ Model  ^  Rev  ^ CPU Type ^ MHz ^ CPUs ^ LAN ^ USB2 ^ USB3 ^ WiFi ^ Flash ^ NVRAM ^ RAM ^ Build (SDK) ^ Notes ^
-| Asus DSL-AC68U |   | ARM | 800 | 2 | 1000 | 1 | 1 | AC1900 | 128MB | 64KB | 256MB | K26ARM (SDK6.37) | [[https://www.linksysinfo.org/index.php?threads/ft-on-asus-dsl-ac68u-work-in-progress.75080| Supported from 2022.3 ]] \\ N**o DSL support. **This device is to be used as a router only. The WAN port is initialized to LAN port 1. |+| Asus DSL-AC68U |   | ARM | 800 | 2 | 1000 | 1 | 1 | AC1900 | 128MB | 64KB | 256MB | K26ARM (SDK6.37) | [[https://www.linksysinfo.org/index.php?threads/ft-on-asus-dsl-ac68u-work-in-progress.75080| Supported from 2022.3 ]] \\ N**o **DSL Support.** **This device is to be used as a router only. The WAN port is initialized to LAN port 1. |
 | Asus RT-N10P |   | MIPS-R2 | 300 | 1 | 100 | - | - | N300 | 8MB | 32KB | 32MB | K26RT-N (SDK5.110) |   | | Asus RT-N10P |   | MIPS-R2 | 300 | 1 | 100 | - | - | N300 | 8MB | 32KB | 32MB | K26RT-N (SDK5.110) |   |
 | Asus RT-N10U | A1/B1/C1 | MIPS-R2 | 300 | 1 | 100 | 1 | - | N300 | 8MB | 32KB | 32MB | K26RT-N (SDK5.110) |   | | Asus RT-N10U | A1/B1/C1 | MIPS-R2 | 300 | 1 | 100 | 1 | - | N300 | 8MB | 32KB | 32MB | K26RT-N (SDK5.110) |   |
Line 35: Line 35:
 | Asus RT-AC88U |   | ARM | 1400 | 2 | 1000 | 1 | 1 | AC3100 | 128MB | 128KB | 512MB | K26ARM714 (SDK714) | Supported from 2022.6 \\ [[https://www.linksysinfo.org/index.php?threads/asus-rt-ac88u-preview-for-ft.77661/|for more info please see]] \\ NOTE: This image will only support LAN Port 1 - 4 + WAN Port. The external RTL8365MB switch (LAN Port 5 - 8) will not be used/supported currently | | Asus RT-AC88U |   | ARM | 1400 | 2 | 1000 | 1 | 1 | AC3100 | 128MB | 128KB | 512MB | K26ARM714 (SDK714) | Supported from 2022.6 \\ [[https://www.linksysinfo.org/index.php?threads/asus-rt-ac88u-preview-for-ft.77661/|for more info please see]] \\ NOTE: This image will only support LAN Port 1 - 4 + WAN Port. The external RTL8365MB switch (LAN Port 5 - 8) will not be used/supported currently |
 | Asus RT-AC5300 |   | ARM | 1400 | 2 | 1000 | 1 | 1 | AC5300 | 128MB | 128KB | 512MB | K26ARM714 (SDK714) | Supported from 2022.6 \\ [[https://www.linksysinfo.org/index.php?threads/asus-rt-ac5300-preview-for-ft.77592/|for more info please see]] (NOT Asus GT-AC5300) | | Asus RT-AC5300 |   | ARM | 1400 | 2 | 1000 | 1 | 1 | AC5300 | 128MB | 128KB | 512MB | K26ARM714 (SDK714) | Supported from 2022.6 \\ [[https://www.linksysinfo.org/index.php?threads/asus-rt-ac5300-preview-for-ft.77592/|for more info please see]] (NOT Asus GT-AC5300) |
-| Asus TUF-AX3000_V2 |   | ARM | 1700 | 4 | 1000 | - | 1 | AX3000 | 256MB | 128KB | 512MB | K419ARM (HND 5.04AX) | 2.5G WAN (Internet) Port \\ Supported from 2023.3 and based on AsusWRT GPL 388.22525 \\ NOTE: AsusWRT GUI and Features + some FreshTomato Features (Status September 2023) |+| Asus TUF-AX3000_V2 |   | ARM | 1700 | 4 | 1000 | - | 1 | AX3000 | 256MB | 128KB | 512MB | K419ARM (HND 5.04AX) | 2.5Gb WAN (Internet) Port \\ Supported from 2023.3. \\ Based on AsusWRT GPL 388.22525. \\ \\ Offers AsusWRT GUI/Features and some FreshTomato Features (as of Sept, 2023) |
 | Asus WL-330gE |   | MIPS-R1 | 240 | 1 | 100 | - | - | G54 | 4MB | FIXME | 16MB | K26 (SDK5.10) |   | | Asus WL-330gE |   | MIPS-R1 | 240 | 1 | 100 | - | - | G54 | 4MB | FIXME | 16MB | K26 (SDK5.10) |   |
 | Asus WL-500GP | v1/v2 | MIPS-R1 | 240 | 1 | 100 | 2 | - | G54 | 8MB | FIXME | 32MB | K26 (SDK5.10) |   | | Asus WL-500GP | v1/v2 | MIPS-R1 | 240 | 1 | 100 | 2 | - | G54 | 8MB | FIXME | 32MB | K26 (SDK5.10) |   |
Line 50: Line 50:
 | Buffalo WHR-HP-G54 |   | MIPS-R1 | 200 | 1 | 100 | - | - | G54 | 4MB | 32KB | 16MB | K26 (SDK5.10) |   | | Buffalo WHR-HP-G54 |   | MIPS-R1 | 200 | 1 | 100 | - | - | G54 | 4MB | 32KB | 16MB | K26 (SDK5.10) |   |
 | Buffalo WZR-D1800H |   | MIPS-R2 | 600 | 1 | 1000 | 1 | - | AC1750 | 128MB | 64KB | 128MB | K26RT-N (SDK5.110) |   | | Buffalo WZR-D1800H |   | MIPS-R2 | 600 | 1 | 1000 | 1 | - | AC1750 | 128MB | 64KB | 128MB | K26RT-N (SDK5.110) |   |
-| Buffalo WZR-1750DHP |   | ARM | 800 | 2 | 1000 | 1 | 1 | AC1750 | 128MB | 64KB | 512MB | K26ARM (SDK6.37) | [[https://www.linksysinfo.org/index.php?threads/buffalo-wzr-1750dhp-bricked.74962/#post-333522|please read first]] |+| Buffalo WZR-1750DHP |   | ARM | 800 | 2 | 1000 | 1 | 1 | AC1750 | 128MB | 64KB | 512MB | K26ARM (SDK6.37) | [[https://www.linksysinfo.org/index.php?threads/buffalo-wzr-1750dhp-bricked.74962/#post-333522|Please read this first]] |
 | CD-R King CW-5358U |   | MIPS-R2 | FIXME | FIXME | 100 | 1 | - | N300 | 8MB | FIXME | 32MB | FIXME |   | | CD-R King CW-5358U |   | MIPS-R2 | FIXME | FIXME | 100 | 1 | - | N300 | 8MB | FIXME | 32MB | FIXME |   |
 | Cisco M10 v2 |   | MIPS-R2  | 300 | 1 | 100 | - | - | N300 | 4MB | 32KB | 32MB | K26RT-N (SDK5.110) |   | | Cisco M10 v2 |   | MIPS-R2  | 300 | 1 | 100 | - | - | N300 | 4MB | 32KB | 32MB | K26RT-N (SDK5.110) |   |
Line 96: Line 96:
 | Netgear R6400 | v1 | ARM | 800 | 2 | 1000 | 1 | 1 | AC1750 | 128MB | 128KB | 256MB | K26ARM (SDK6.37) |   | | Netgear R6400 | v1 | ARM | 800 | 2 | 1000 | 1 | 1 | AC1750 | 128MB | 128KB | 256MB | K26ARM (SDK6.37) |   |
 | Netgear R6400 | v2 | ARM | 1000 | 2 | 1000 | 1 | 1 | AC1750 | 128MB | 128KB | 256MB | K26ARM (SDK6.37) |   | | Netgear R6400 | v2 | ARM | 1000 | 2 | 1000 | 1 | 1 | AC1750 | 128MB | 128KB | 256MB | K26ARM (SDK6.37) |   |
-| Netgear R6700 | v1 | ARM | 1000 | 2 | 1000 | - | 1 | AC1750 | 128MB | 64KB | 256MB | K26ARM (SDK6.37) | Supported from 2020.8 \\ \\ Note: Do not enable JFFS with firmware ** less than 2022.1 for R6900, R7000 and R6700v1 (it will delete board_data partition!)** | +| Netgear R6700 | v1 | ARM | 1000 | 2 | 1000 | - | 1 | AC1750 | 128MB | 64KB | 256MB | K26ARM (SDK6.37) | Supported from 2020.8. \\ \\ Do not enable JFFS with firmware ** **less than 2022.1 for R6900, R7000 and R6700v1. Doing so will delete board_data partition! | 
-| Netgear R6700 | v3 | ARM | 1000 | 2 | 1000 | 1 | 1 | AC1750 | 128MB | 128KB | 256MB (512MB) | K26ARM (SDK6.37) | Note: Some router can have 512 MB RAM. Images for both variants are provided:\\ "...-AIO-128K-512M.trx" (support for 512 MB RAM)\\ "...-AIO-128K.trx" (support up to 256 MB RAM)\\ Note 2: If not sure or unknown, just use the 512 MB RAM version, will work always | +| Netgear R6700 | v3 | ARM | 1000 | 2 | 1000 | 1 | 1 | AC1750 | 128MB | 128KB | 256MB (512MB) | K26ARM (SDK6.37) | Some of these routers have 512 MB RAM. Images for both variants are provided:\\ "...-AIO-128K-512M.trx" (support for 512 MB RAM)\\ "...-AIO-128K.trx" (support up to 256 MB RAM) \\ \\ If not sure or unknown, just use the 512 MB RAM version, it will always work. | 
-| Netgear R6900 | v1 | ARM | 1000 | 2 | 1000 | - | 1 | AC1900 | 128MB | 64KB | 256MB | K26ARM (SDK6.37) | Supported from 2021.3 \\ \\ Note: Do not enable JFFS with firmware ** less than 2022.1 for R6900, R7000 and R6700v1 (it will delete board_data partition!)** | +| Netgear R6900 | v1 | ARM | 1000 | 2 | 1000 | - | 1 | AC1900 | 128MB | 64KB | 256MB | K26ARM (SDK6.37) | Supported from 2021.3 \\ \\ Do not enable JFFS with firmware before 2022.1 for R6900, R7000 and R6700v1. Doing so will delete board_data partition! | 
-| Netgear R7000 |   | ARM | 1000 | 2 | 1000 | 1 | 1 | AC1900 | 128MB | 64KB | 256MB | K26ARM (SDK6.37) | Note: Do not enable JFFS with firmware ** less than 2022.1 for R6900, R7000 and R6700v1 (it will delete board_data partition!)** \\ \\ Note 2: If you have a custom CFE like Vortex 1.3.0.7, please flash back your original Netgear cfe / bootloader before updating to Freshtomato 2020.3 and newer. |+| Netgear R7000 |   | ARM | 1000 | 2 | 1000 | 1 | 1 | AC1900 | 128MB | 64KB | 256MB | K26ARM (SDK6.37) | Do not enable JFFS with firmware before** **2022.1 for R6900, R7000 and R6700v1. Doing so will delete board_data partition! \\ \\ If you have a custom CFE, like Vortex 1.3.0.7, flash back your original Netgear cfe / bootloader before updating to **[[https://www.linksysinfo.org/index.php?threads/add-support-for-netgear-ex7000.78502/|See Linksys-Forum thread ]]**Freshtomato 2020.3 and newer. | 
 +| Netgear EX7000 |   | ARM | 800 | 2 | 1000 | - | 1 | AC1900 | 16MB | 64KB | 128MB | K26ARM (SDK6.37) | Work in progress. Switch not yet working |
 | Netgear R7900 |   | ARM | 1000 | 2 | 1000 | - | 1 | AC3000 | 128MB | 64KB | 512MB (256 MB?) | K26ARM7 (SDK7) | Supported from 2022.4 | | Netgear R7900 |   | ARM | 1000 | 2 | 1000 | - | 1 | AC3000 | 128MB | 64KB | 512MB (256 MB?) | K26ARM7 (SDK7) | Supported from 2022.4 |
-| Netgear R8000 |   | ARM | 1000 | 2 | 1000 | 1 | 1 | AC3200 | 128MB | 64KB | 256MB | K26ARM7 (SDK7) | Note: Do not enable JFFS with firmware ** less than 2022.3 for R8000 (it can delete/damage board_data partition!)** |+| Netgear R8000 |   | ARM | 1000 | 2 | 1000 | 1 | 1 | AC3200 | 128MB | 64KB | 256MB | K26ARM7 (SDK7) | Do not enable JFFS with firmware less than 2022.3 for R8000. Doing so can delete/damage board_data partition! |
 | Netgear XR300 |   | ARM | 1000 | 2 | 1000 | - | 1 | AC1750 | 128MB | 128KB | 512MB | K26ARM (SDK6.37) | Supported from 2021.1\\ (images ending with "…-128K-512M.trx") | | Netgear XR300 |   | ARM | 1000 | 2 | 1000 | - | 1 | AC1750 | 128MB | 128KB | 512MB | K26ARM (SDK6.37) | Supported from 2021.1\\ (images ending with "…-128K-512M.trx") |
-| Netgear WNR2000 | v2 | MIPS-R2 | 300 | 1 | 100 | - | - | N300 | 4MB | 32KB | 32MB | K26 (SDK5.10) | Flash storage limited to about 3.5MB, so FT 2020.x IPv6 is the only current firmware that will fit. |+| Netgear WNR2000 | v2 | MIPS-R2 | 300 | 1 | 100 | - | - | N300 | 4MB | 32KB | 32MB | K26 (SDK5.10) | Flash storage limited to about 3.5MB, so 2020.x IPv6 image is the only current firmware that will fit. |
 | Netgear WNR3500 | v2 | MIPS-R2 | 453 | 1 | 1000 | - | - | N300 | 3.5MB | 32KB | 32MB | K26 (SDK5.10) | Due to hard-coded jffs2 partition, flash size is reduced to only 3,473,408 bytes. As of today, FT 2020.x MiniIPV6 is 3,407,872 bytes and is the only image type that will fit. | | Netgear WNR3500 | v2 | MIPS-R2 | 453 | 1 | 1000 | - | - | N300 | 3.5MB | 32KB | 32MB | K26 (SDK5.10) | Due to hard-coded jffs2 partition, flash size is reduced to only 3,473,408 bytes. As of today, FT 2020.x MiniIPV6 is 3,407,872 bytes and is the only image type that will fit. |
-| Netgear WNR3500L | v1 | MIPS-R2 | 453 | 1 | 1000 | 1 | - | N300 | 8MB | 32KB | 64MB | K26 (SDK5.10) | **NOTE:** image must be smaller than ~7.3 MB (7,654,604.8 Bytes or 7,475.2 KB), see [[https://www.linksysinfo.org/index.php?threads/big-vpn-23-3-problem-on-wnr3500l.78067/#post-343373|Forum Topic/Issue]]  |+| Netgear WNR3500L | v1 | MIPS-R2 | 453 | 1 | 1000 | 1 | - | N300 | 8MB | 32KB | 64MB | K26 (SDK5.10) | Image must be smaller than ~7.3 MB (7,654,604.8 Bytes or 7,475.2 KB), see [[https://www.linksysinfo.org/index.php?threads/big-vpn-23-3-problem-on-wnr3500l.78067/#post-343373|Forum Topic/Issue]]  |
 | Netgear WNR3500L | v2 | MIPS-R2 | 480 | 1 | 1000 | 1 | - | N300 | 32MB | 32KB | 128MB | K26RT-N (SDK5.110) | Please use only images with the name "freshtomato-Netgear-3500Lv2-K26USB_RT-N5x-XXXX.chk" (AIO or VPN version). | | Netgear WNR3500L | v2 | MIPS-R2 | 480 | 1 | 1000 | 1 | - | N300 | 32MB | 32KB | 128MB | K26RT-N (SDK5.110) | Please use only images with the name "freshtomato-Netgear-3500Lv2-K26USB_RT-N5x-XXXX.chk" (AIO or VPN version). |
 | Netgear WNDR3400 | v1 | MIPS-R2 | 480 | 1 | 100 | 1 | - | N600 | 8MB | 64KB | 64MB | K26RT-N (SDK5.110) |   | | Netgear WNDR3400 | v1 | MIPS-R2 | 480 | 1 | 100 | 1 | - | N600 | 8MB | 64KB | 64MB | K26RT-N (SDK5.110) |   |
-| Netgear WNDR3400 | v2/v3 | MIPS-R2 | 530 | 1 | 100 | 1 | - | N600 | 8MB | 64KB | 64MB | K26RT-N (SDK5.110) | Important:Please Read <[[https://www.linksysinfo.org/index.php?threads/w-i-p-wndr3400v2-development.77559/post-337553|Flashing Instructions]]> |+| Netgear WNDR3400 | v2/v3 | MIPS-R2 | 530 | 1 | 100 | 1 | - | N600 | 8MB | 64KB | 64MB | K26RT-N (SDK5.110) | Please Read <[[https://www.linksysinfo.org/index.php?threads/w-i-p-wndr3400v2-development.77559/post-337553|Flashing Instructions]]> |
 | Netgear WNDR3700 | v3 | MIPS-R2 | 480 | 1 | 1000 | 1 | - | N600 | 8MB | 64KB | 64MB | K26RT-N (SDK5.110) | Supported from 2020.6. | | Netgear WNDR3700 | v3 | MIPS-R2 | 480 | 1 | 1000 | 1 | - | N600 | 8MB | 64KB | 64MB | K26RT-N (SDK5.110) | Supported from 2020.6. |
 | Netgear WNDR4000 |   | MIPS-R2 | 480 | 1 | 1000 | 1 |   | N750 | 8MB | 64KB | 64MB | K26RT-N (SDK5.110) | Supported from 2020.6. | | Netgear WNDR4000 |   | MIPS-R2 | 480 | 1 | 1000 | 1 |   | N750 | 8MB | 64KB | 64MB | K26RT-N (SDK5.110) | Supported from 2020.6. |
Line 120: Line 121:
 | Tenda N80 |   | MIPS-R2 | 500 | 1 | 1000 | 1 | - | N900 | 8MB | FIXME | 128MB | K26RT-N (SDK5.110) |   | | Tenda N80 |   | MIPS-R2 | 500 | 1 | 1000 | 1 | - | N900 | 8MB | FIXME | 128MB | K26RT-N (SDK5.110) |   |
 | Tenda W1800R |   | MIPS-R2 | 600 | 1 | 1000 | 2 | - | AC1750 | 16MB | FIXME | 256MB | K26RT-AC (SDK6.30) |   | | Tenda W1800R |   | MIPS-R2 | 600 | 1 | 1000 | 2 | - | AC1750 | 16MB | FIXME | 256MB | K26RT-AC (SDK6.30) |   |
-| Xiaomi Mi R1D |   | ARM | 1000 | 2 | 1000 | 1 | - | AC1200 | 128MB | 64KB | 256MB | K26ARM (SDK6.37) | **IMPORTANT :** This unit may be  bricked if you attempt to FULLY erase NVRAM. Resetting values to defaults works safely. To access the CFE when you have the stock xVortex CFE, you must power on the unit while holding the Reset button for 10 seconds. [[https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1139833#1139833|Details]] \\   \\ Please use the images with ending "…-Custom-64K.trx"\\ \\ (wl0 is the 5 GHz radio). |+| Xiaomi Mi R1D |   | ARM | 1000 | 2 | 1000 | 1 | - | AC1200 | 128MB | 64KB | 256MB | K26ARM (SDK6.37) | This unit may be  bricked if you attempt to FULLY erase NVRAM. Resetting values to defaults works safely. To access the CFE when you have the stock xVortex CFE, you must power on the unit while holding the Reset button for 10 seconds. [[https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1139833#1139833|Details]] \\   \\ Please use the images with ending "…-Custom-64K.trx"\\ \\ (wl0 is the 5 GHz radio). |
 | ZTE ZXV10 H618B |   | MIPS-R1 | 240 | 1 | 100 | 1 | - | G54 | 16MB | FIXME | 32MB | K26 (SDK5.10) |   | | ZTE ZXV10 H618B |   | MIPS-R1 | 240 | 1 | 100 | 1 | - | G54 | 16MB | FIXME | 32MB | K26 (SDK5.10) |   |
 | ZTE H218N |   | MIPS-R2 | 500 | 1 | 1000 | 1 | - | N300 | 16MB | FIXME | 64MB | K26RT-N (SDK5.110) |   | | ZTE H218N |   | MIPS-R2 | 500 | 1 | 1000 | 1 | - | N300 | 16MB | FIXME | 64MB | K26RT-N (SDK5.110) |   |
hardware_compatibility.txt · Last modified: 2024/05/31 18:11 by girlpower

Page Tools

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki