Site Tools


hardware_compatibility

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
Next revisionBoth sides next revision
hardware_compatibility [2022/05/11 06:24] – Adjust Netgear R7900 support (not yet added to master branch) m_arshardware_compatibility [2022/05/25 14:47] – E2500 V3 has 16MB of RAM pedro
Line 5: Line 5:
 <sortable> <sortable>
  
-^ Model  ^  Rev  ^ CPU Type ^ MHz ^ CPUs ^ LAN ^ USB2 ^ USB3 ^ WiFi ^ Flash ^ NVRAM ^ RAM ^ Build ^ Notes |+^ Model  ^  Rev  ^ CPU Type ^ MHz ^ CPUs ^ LAN ^ USB2 ^ USB3 ^ WiFi ^ Flash ^ NVRAM ^ RAM ^ Build ^ Notes ^
 | Asus DSL‑AC68U |    ARM  | 800 | 2 |  1Gbps  | 1 | 1 | AC1900 | 128MB  | 64KB  | 256MB  | K26ARM  | [[https://www.linksysinfo.org/index.php?threads/ft-on-asus-dsl-ac68u-work-in-progress.75080| Supported from 2022.3 ]] \\ **no xDSL support**, this device is to be used as a router only. | | Asus DSL‑AC68U |    ARM  | 800 | 2 |  1Gbps  | 1 | 1 | AC1900 | 128MB  | 64KB  | 256MB  | K26ARM  | [[https://www.linksysinfo.org/index.php?threads/ft-on-asus-dsl-ac68u-work-in-progress.75080| Supported from 2022.3 ]] \\ **no xDSL support**, this device is to be used as a router only. |
 | Asus RT-N10P  |   | MIPS‑R2 | 300  | 1 | 100Mbps | - | - |  N300  | 8MB  | 32KB  | 32MB  | K26RT‑N  |   | | Asus RT-N10P  |   | MIPS‑R2 | 300  | 1 | 100Mbps | - | - |  N300  | 8MB  | 32KB  | 32MB  | K26RT‑N  |   |
Line 64: Line 64:
 | Linksys E2000  |   | MIPS‑R2 | 354  | 1 |  1Gbps  | - | - |  N300  | 8MB  | 60KB  | 32MB  | K26 or K26RT‑N  |   | | Linksys E2000  |   | MIPS‑R2 | 354  | 1 |  1Gbps  | - | - |  N300  | 8MB  | 60KB  | 32MB  | K26 or K26RT‑N  |   |
 | Linksys E2500  |  v1/v2  | MIPS‑R2 | 300  | 1 | 100Mbps | - | - |  N600  | 8MB  | 64KB  | 64MB  | K26RT‑N  | NVRAM is limited to 32kB.  | | Linksys E2500  |  v1/v2  | MIPS‑R2 | 300  | 1 | 100Mbps | - | - |  N600  | 8MB  | 64KB  | 64MB  | K26RT‑N  | NVRAM is limited to 32kB.  |
-| Linksys E2500  |  v3  | MIPS‑R2 | 500  | 1 | 100Mbps | 1 | - |  N600  | 8MB  | 64KB  | 64MB  | K26RT‑N  | NVRAM is limited to 32kB.  |+| Linksys E2500  |  v3  | MIPS‑R2 | 500  | 1 | 100Mbps | 1 | - |  N600  | 16MB  | 64KB  | 64MB  | K26RT‑N  | NVRAM is limited to 32kB.  |
 | Linksys E3000  |   | MIPS‑R2 | 480  | 1 |  1Gbps  | 1 | - |  N600  | 8MB  | 60KB  | 64MB  | K26 or K26RT‑N  |   | | Linksys E3000  |   | MIPS‑R2 | 480  | 1 |  1Gbps  | 1 | - |  N600  | 8MB  | 60KB  | 64MB  | K26 or K26RT‑N  |   |
 | Linksys E3200  |   | MIPS‑R2 | 500  | 1 |  1Gbps  | 1 | - |  N600  | 16MB  | 64KB  | 64MB  | K26RT‑N  | NVRAM is limited to 32kB.  | | Linksys E3200  |   | MIPS‑R2 | 500  | 1 |  1Gbps  | 1 | - |  N600  | 16MB  | 64KB  | 64MB  | K26RT‑N  | NVRAM is limited to 32kB.  |
Line 91: Line 91:
 | Netgear R6400  |  v1  |  ARM  | 800  | 2 |  1Gbps  | 1 | 1 | AC1750 | 128MB  | 128KB  | 256MB  | K26ARM  |   | | Netgear R6400  |  v1  |  ARM  | 800  | 2 |  1Gbps  | 1 | 1 | AC1750 | 128MB  | 128KB  | 256MB  | K26ARM  |   |
 | Netgear R6400  |  v2  |  ARM  | 1000 | 2 |  1Gbps  | 1 | 1 | AC1750 | 128MB  | 128KB  | 256MB  | K26ARM  |   | | Netgear R6400  |  v2  |  ARM  | 1000 | 2 |  1Gbps  | 1 | 1 | AC1750 | 128MB  | 128KB  | 256MB  | K26ARM  |   |
-| Netgear R6700  |  v1  |  ARM  | 1000 | 2 |  1Gbps  | - | 1 | AC1750 | 128MB  | 64KB  | 256MB  | K26ARM  | Supported from 2020.8 |+| Netgear R6700  |  v1  |  ARM  | 1000 | 2 |  1Gbps  | - | 1 | AC1750 | 128MB  | 64KB  | 256MB  | K26ARM  | Supported from 2020.8 \\ \\ Note: Do not enable JFFS with firmware ** less than 2022.1 for R6900, R7000 and R6700v1 (it will delete board_data partition!)** |
 | Netgear R6700  |  v3  |  ARM  | 1000 | 2 |  1Gbps  | 1 | 1 | AC1750 | 128MB  | 128KB  | 256MB (512MB)  | K26ARM  | Note: Some router can have 512 MB RAM. Images for both variants are provided:\\ "...-AIO-128K-512M.trx" (support for 512 MB RAM)\\ "...-AIO-128K.trx" (support up to 256 MB RAM)\\ Note 2: If not sure or unknown, just use the 512 MB RAM version, will work always  | | Netgear R6700  |  v3  |  ARM  | 1000 | 2 |  1Gbps  | 1 | 1 | AC1750 | 128MB  | 128KB  | 256MB (512MB)  | K26ARM  | Note: Some router can have 512 MB RAM. Images for both variants are provided:\\ "...-AIO-128K-512M.trx" (support for 512 MB RAM)\\ "...-AIO-128K.trx" (support up to 256 MB RAM)\\ Note 2: If not sure or unknown, just use the 512 MB RAM version, will work always  |
-| Netgear R6900  |  v1  |  ARM  | 1000 | 2 |  1Gbps  | - | 1 | AC1900 | 128MB  | 64KB | 256MB  | K26ARM  | Supported from 2021.3 | +| Netgear R6900  |  v1  |  ARM  | 1000 | 2 |  1Gbps  | - | 1 | AC1900 | 128MB  | 64KB | 256MB  | K26ARM  | Supported from 2021.3 \\ \\ Note: Do not enable JFFS with firmware ** less than 2022.1 for R6900, R7000 and R6700v1 (it will delete board_data partition!)** 
-| Netgear R7000  |    ARM  | 1000 | 2 |  1Gbps  | 1 | 1 | AC1900 | 128MB  | 64KB  | 256MB  | K26ARM  | If you have a custom CFE like Vortex 1.3.0.7, please flash back your original Netgear cfe / bootloader before updating to Freshtomato 2020.3 and newer. +| Netgear R7000  |    ARM  | 1000 | 2 |  1Gbps  | 1 | 1 | AC1900 | 128MB  | 64KB  | 256MB  | K26ARM Note: Do not enable JFFS with firmware ** less than 2022.1 for R6900, R7000 and R6700v1 (it will delete board_data partition!)** \\ \\ Note 2: If you have a custom CFE like Vortex 1.3.0.7, please flash back your original Netgear cfe / bootloader before updating to Freshtomato 2020.3 and newer. 
-| Netgear R7900  |    ARM  | 1000 | 2 |  1Gbps  | - | 1 | AC3000 | 128MB  | 64KB  | 512MB (256 MB?)  | K26ARM7  | Supported from 2022.X (tbd.)  | +| Netgear R7900  |    ARM  | 1000 | 2 |  1Gbps  | - | 1 | AC3000 | 128MB  | 64KB  | 512MB (256 MB?)  | K26ARM7  | Supported from 2022. | 
-| Netgear R8000  |    ARM  | 1000 | 2 |  1Gbps  | 1 | 1 | AC3200 | 128MB  | 64KB  | 256MB  | K26ARM7   |+| Netgear R8000  |    ARM  | 1000 | 2 |  1Gbps  | 1 | 1 | AC3200 | 128MB  | 64KB  | 256MB  | K26ARM7 Note: Do not enable JFFS with firmware ** less than 2022.3 for R8000 (it can delete/damage board_data partition!)**  |
 | Netgear XR300  |    ARM  | 1000 | 2 |  1Gbps  | - | 1 | AC1750 | 128MB  | 128KB  | 512MB  | K26ARM  | Supported from 2021.1\\ (images ending with "…-128K-512M.trx") | | Netgear XR300  |    ARM  | 1000 | 2 |  1Gbps  | - | 1 | AC1750 | 128MB  | 128KB  | 512MB  | K26ARM  | Supported from 2021.1\\ (images ending with "…-128K-512M.trx") |
 | Netgear WNR2000  |  v2  | MIPS‑R2 | 300  | 1 | 100Mbps | - | - |  N300  | 4MB  | 32KB  | 32MB  | K26  | Flash storage limited to about 3.5MB, so FT 2020.x IPv6 is the only current firmware that will fit.  | | Netgear WNR2000  |  v2  | MIPS‑R2 | 300  | 1 | 100Mbps | - | - |  N300  | 4MB  | 32KB  | 32MB  | K26  | Flash storage limited to about 3.5MB, so FT 2020.x IPv6 is the only current firmware that will fit.  |
hardware_compatibility.txt · Last modified: 2024/03/26 08:48 by m_ars