Site Tools


hardware_compatibility

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
Next revisionBoth sides next revision
hardware_compatibility [2022/05/11 06:24] – Adjust Netgear R7900 support (not yet added to master branch) m_arshardware_compatibility [2022/08/03 17:00] rs232
Line 5: Line 5:
 <sortable> <sortable>
  
-^ Model  ^  Rev  ^ CPU Type ^ MHz ^ CPUs ^ LAN ^ USB2 ^ USB3 ^ WiFi ^ Flash ^ NVRAM ^ RAM ^ Build ^ Notes | +^ Model  ^  Rev  ^ CPU Type ^ MHz ^ CPUs ^ LAN ^ USB2 ^ USB3 ^ WiFi ^ Flash ^ NVRAM ^ RAM ^ Build ^ Notes ^ 
-| Asus DSLAC68U |    ARM  | 800 | 2 |  1Gbps  | 1 | 1 | AC1900 | 128MB  | 64KB  | 256MB  | K26ARM  | [[https://www.linksysinfo.org/index.php?threads/ft-on-asus-dsl-ac68u-work-in-progress.75080| Supported from 2022.3 ]] \\ **no xDSL support**, this device is to be used as a router only. | +| Asus DSL-AC68U | | ARM | 800 | 2 | 1000 | 1 | 1 | AC1900 | 128MB | 64KB | 256MB | K26ARM | [[https://www.linksysinfo.org/index.php?threads/ft-on-asus-dsl-ac68u-work-in-progress.75080| Supported from 2022.3 ]] \\ **no xDSL support**, this device is to be used as a router only. WAN port is initialized to LAN port 1 
-Asus RT-N10P    | MIPSR2 | 300  | 1 | 100Mbps | - | - |  N300  | 8MB  | 32KB  | 32MB  | K26RT   +Asus RT-N10P | | MIPS-R2 | 300 | 1 | 100 | - | - | N300 | 8MB | 32KB | 32MB | K26RT-N | | 
-Asus RT-N10U  | A1/B1/C1 | MIPSR2 | 300  | 1 | 100Mbps | 1 | - |  N300  | 8MB  | 32KB  | 32MB  | K26RT   +Asus RT-N10U | A1/B1/C1 | MIPS-R2 | 300 | 1 | 100 | 1 | - | N300 | 8MB | 32KB | 32MB | K26RT-N | | 
-Asus RT-N12   A1  | MIPSR2 | 300  | 1 | 100Mbps | - | - |  N300  | 4MB  | 32KB  | 32MB  | K26    +Asus RT-N12 | A1 | MIPS-R2 | 300 | 1 | 100 | - | - | N300 | 4MB | 32KB | 32MB | K26 | | 
-Asus RT-N12  | B1/C1/D1 | MIPSR2 | 300  | 1 | 100Mbps | - | - |  N300  | 8MB  | 32KB  | 32MB  | K26RT   +Asus RT-N12 | B1/C1/D1 | MIPS-R2 | 300 | 1 | 100 | - | - | N300 | 8MB | 32KB | 32MB | K26RT-N | | 
-Asus RT‑N12HP   A1/B1  | MIPSR2 | 300  | 1 | 100Mbps | - | - |  N300  | 8MB  | 32KB  | 32MB  | K26RT | Support for High Power model added in 2020.4 | +Asus RT-N12HP | A1/B1 | MIPS-R2 | 300 | 1 | 100 | - | - | N300 | 8MB | 32KB | 32MB | K26RT-N | Support for High Power model added in 2020.4 | 
-Asus RT-N12K    | MIPSR2 | 300  | 1 | 100Mbps | - | - |  N300  | 8MB  | 32KB  | 32MB  | K26RT   +Asus RT-N12K | | MIPS-R2 | 300 | 1 | 100 | - | - | N300 | 8MB | 32KB | 32MB | K26RT-N | | 
-Asus RT‑N12VP    | MIPSR2 | 300  | 1 | 100Mbps | - | - |  N300  | 8MB  | 32KB  | 32MB  | K26RT   +Asus RT-N12VP | | MIPS-R2 | 300 | 1 | 100 | - | - | N300 | 8MB | 32KB | 32MB | K26RT-N | | 
-Asus RT-N15U    | MIPSR2 | 500  | 1 |  1Gbps  | 1 | - |  N300  | 8MB  | 32KB  | 64MB  | K26RT   +Asus RT-N15U | | MIPS-R2 | 500 | 1 | 1000 | 1 | - | N300 | 8MB | 32KB | 64MB | K26RT-N | | 
-Asus RT-N16    | MIPSR2 | 480  | 1 |  1Gbps  | 2 | - |  N300  | 32MB  | 32KB  | 128MB  | K26 or K26RT | 32K NVRAM build required.  +Asus RT-N16 | | MIPS-R2 | 480 | 1 | 1000 | 2 | - | N300 | 32MB | 32KB | 128MB | K26 or K26RT-N | 32K NVRAM build required. | 
-Asus RT‑AC1750   B1   ARM  | 1000 | 2 |  1Gbps  | 1 | 1 | AC1750 | 128MB | 64KB | 256MB | K26ARM | Supported from 2021.3. | +Asus RT-AC1750 | B1 | ARM | 1000 | 2 | 1000 | 1 | 1 | AC1750 | 128MB | 64KB | 256MB | K26ARM | Supported from 2021.3. | 
-Asus RT-N18U     ARM  | 800  | 1 |  1Gbps  | 1 | 1 |  N600  | 128MB  | 64KB  | 256MB  | K26ARM  | Single core (please use images ending with "…-64K-NOSMP.trx").  +Asus RT-N18U | | ARM | 800 | 1 | 1000 | 1 | 1 | N600 | 128MB | 64KB | 256MB | K26ARM | Single core (please use images ending with "…-64K-NOSMP.trx"). | 
-Asus RT-N53    | MIPSR2 | 300  | 1 | 100Mbps | - | - |  N600  | 8MB  | 32KB  | 32MB  | K26RT   +Asus RT-N53 | | MIPS-R2 | 300 | 1 | 100 | - | - | N600 | 8MB | 32KB | 32MB | K26RT-N | | 
-Asus RT-N66U    | MIPSR2 | 600  | 1 |  1Gbps  | 2 | - |  N900  | 32MB  | 64KB  | 256MB  | K26RTN or K26RTAC    +Asus RT-N66U | | MIPS-R2 | 600 | 1 | 1000 | 2 | - | N900 | 32MB | 64KB | 256MB | K26RT-N or K26RT-AC | | 
-Asus RT-N66U  | C1 (B2)   ARM  | 1000 | 2 |  1Gbps  | 1 | 1 |  N900  | 128MB  | 64KB  | 256MB  | K26ARM  | Supported from 2020.8. | +Asus RT-N66U | C1 (B2) | ARM | 1000 | 2 | 1000 | 1 | 1 | N900 | 128MB | 64KB | 256MB | K26ARM | Supported from 2020.8. | 
-Asus RT‑AC1900U     ARM  | 1000 | 2 |  1Gbps  | 1 | 1 | AC1900 | 128MB | 64KB | 256MB | K26ARM | Supported from 2021.3. | +Asus RT-AC1900U | | ARM | 1000 | 2 | 1000 | 1 | 1 | AC1900 | 128MB | 64KB | 256MB | K26ARM | Supported from 2021.3. | 
-Asus RT‑AC56S     ARM  | 800  | 1 |  1Gbps  | 1 | 1 | AC1200 | 128MB  | 64KB  | 128MB  | K26ARM  | Single core (please use images ending with "…-64K-NOSMP.trx").  +Asus RT-AC56S | | ARM | 800 | 1 | 1000 | 1 | 1 | AC1200 | 128MB | 64KB | 128MB | K26ARM | Single core (please use images ending with "…-64K-NOSMP.trx"). | 
-Asus RT‑AC56U/    ARM  | 800  | 2 |  1Gbps  | 1 | 1 | AC1200 | 128MB | 64KB  | 256MB  | K26ARM    +Asus RT-AC56U/R | | ARM | 800 | 2 | 1000 | 1 | 1 | AC1200 | 128MB | 64KB | 256MB | K26ARM | | 
-Asus RT‑AC66U  | A1/A2/B1 | MIPSR2 | 600  | 1 |  1Gbps  | 2 | - | AC1750 | 32MB | 64KB  | 256MB  | K26RTAC  | This model is different from the RT-AC66U_B1, as this has two USB 2.0 ports at the rear of the router.  +Asus RT-AC66U | A1/A2/B1 | MIPS-R2 | 600 | 1 | 1000 | 2 | - | AC1750 | 32MB | 64KB | 256MB | K26RT-AC | This model is different from the RT-AC66U_B1, as this has two USB 2.0 ports at the rear of the router. | 
-Asus RT‑AC66U_B1     ARM  | 1000 | 2 |  1Gbps  | 1 | 1 | AC1750 | 128MB | 64KB  | 256MB  | K26ARM  | Do not confuse this with the RT-AC66U Revision B1 above, which is a MIPS-R2 device. Check if the device has (blue) USB 3.x ports to be sure. Also, one USB port is at the front and the other one is at the rear.  +Asus RT-AC66U_B1 | | ARM | 1000 | 2 | 1000 | 1 | 1 | AC1750 | 128MB | 64KB | 256MB | K26ARM | Do not confuse this with the RT-AC66U Revision B1 above, which is a MIPS-R2 device. Check if the device has (blue) USB 3.x ports to be sure. Also, one USB port is at the front and the other one is at the rear. | 
-Asus RT‑AC67U     ARM  | 1000 | 2 |  1Gbps  | 1 | 1 | AC1900 | 128MB  | 64KB  | 256MB  | K26ARM  | Supported from 2020.8. | +Asus RT-AC67U | | ARM | 1000 | 2 | 1000 | 1 | 1 | AC1900 | 128MB | 64KB | 256MB | K26ARM | Supported from 2020.8. | 
-Asus RT‑AC68U/R/ | A1/A2/B1 |  ARM  | 800  | 2 |  1Gbps  | 1 | 1 | AC1900 | 128MB  | 64KB  | 256MB  | K26ARM    +Asus RT-AC68U/R/P | A1/A2/B1 | ARM | 800 | 2 | 1000 | 1 | 1 | AC1900 | 128MB | 64KB | 256MB | K26ARM | | 
-Asus RT‑AC68U  | C1/E1/V3 |  ARM  | 1000 | 2 |  1Gbps  | 1 | 1 | AC1900 | 128MB  | 64KB  | 256MB  | K26ARM  | C1/E1 supported from 2019.3 \\ V3 supported from 2021.3 \\ V4 NOT supported | +Asus RT-AC68U | C1/E1/V3 | ARM | 1000 | 2 | 1000 | 1 | 1 | AC1900 | 128MB | 64KB | 256MB | K26ARM | C1/E1 supported from 2019.3 \\ V3 supported from 2021.3 \\ V4 NOT supported | 
-Asus RT‑AC68U   B2   ARM  | 1400 | 2 |  1Gbps  | 1 | 1 | AC1900 | 128MB  | 64KB  | 256MB  | K26ARM    +Asus RT-AC68U | B2 | ARM | 1400 | 2 | 1000 | 1 | 1 | AC1900 | 128MB | 64KB | 256MB | K26ARM | | 
-Asus RT‑AC1900P     ARM  | 1400 | 2 |  1Gbps  | 1 | 1 | AC1900 | 128MB  | 64KB  | 256MB  | K26ARM    +Asus RT-AC1900P | | ARM | 1400 | 2 | 1000 | 1 | 1 | AC1900 | 128MB | 64KB | 256MB | K26ARM | | 
-Asus RT‑AC3200     ARM  | 1000 | 2 |  1Gbps  | 1 | 1 | AC3200 | 128MB  | 128KB  | 256MB  | K26ARM7  | Please check NVRAM first (64KB default at release or 128KB after Asus update). To get 128KB version FreshTomato flashed, you must first have Asus stock firmware V3.0.0.4.382.51374 installed.  +Asus RT-AC3200 | | ARM | 1000 | 2 | 1000 | 1 | 1 | AC3200 | 128MB | 128KB | 256MB | K26ARM7 | Please check NVRAM first (64KB default at release or 128KB after Asus update). To get 128KB version FreshTomato flashed, you must first have Asus stock firmware V3.0.0.4.382.51374 installed. | 
-Asus WL‑330gE    | MIPSR1 | 240  | 1 | 100Mbps | - | - |  G54  | 4MB  | FIXME | 16MB  | K26    +Asus WL-330gE | | MIPS-R1 | 240 | 1 | 100 | - | - | G54 | 4MB | FIXME | 16MB | K26 | | 
-Asus WL‑500GP   v1/v2  | MIPSR1 | 240  | 1 | 100Mbps | 2 | - |  G54  | 8MB  | FIXME | 32MB  | K26    +Asus WL-500GP | v1/v2 | MIPS-R1 | 240 | 1 | 100 | 2 | - | G54 | 8MB | FIXME | 32MB | K26 | | 
-Asus WL‑500W    | MIPSR1 | 264  | 1 | 100Mbps | 2 | - |  G54  | 8MB  | FIXME | 32MB  | K26    +Asus WL-500W | | MIPS-R1 | 264 | 1 | 100 | 2 | - | G54 | 8MB | FIXME | 32MB | K26 | | 
-Asus WL‑520GU    | MIPSR1 | 240  | 1 | 100Mbps | 1 | - |  G54  | 4MB  | FIXME | 16MB  | K26    +Asus WL-520GU | | MIPS-R1 | 240 | 1 | 100 | 1 | - | G54 | 4MB | FIXME | 16MB | K26 | | 
-Belkin F5D    | FIXME | FIXME | FIXME | FIXME | - | - | FIXME | FIXME | 64KB  | FIXME | FIXME |   +Belkin F5D | | FIXME | FIXME | FIXME | 100 | - | - | FIXME | FIXME | 64KB | FIXME | FIXME | | 
-Belkin F7D3301/7301   v1  | MIPSR2 | 453  | 1 | 100Mbps | 2 | - |  N300  | 8MB  | 32KB  | 64MB  | K26    +Belkin F7D3301/7301 | v1 | MIPS-R2 | 453 | 1 | 100 | 2 | - | N300 | 8MB | 32KB | 64MB | K26 | | 
-Belkin F7D3302/7302   v1  | MIPSR2 | 453  | 1 | 100Mbps | 1 | - |  N300  | 8MB  | 32KB  | 64MB  | K26  | Belkin F7D3302/7302.  +Belkin F7D3302/7302 | v1 | MIPS-R2 | 453 | 1 | 100 | 1 | - | N300 | 8MB | 32KB | 64MB | K26 | Belkin F7D3302/7302. | 
-Belkin F7D4302   FIXME  | MIPSR2 | 533  | 1 | 100Mbps FIXME | - | A/N300 | 8MB  | 32KB  | 64MB  | K26    +Belkin F7D4302 | FIXME | MIPS-R2 | 533 | 1 | 100 | - | A/N300 | 8MB | 32KB | 64MB | K26 | | 
-Belkin F9K1102   v1/v3  | MIPSR2 | 533  | 1 | 100Mbps | 1 | - |  N600  | 8MB  | 32KB  | 64MB  | K26RT | [[https://www.linksysinfo.org/index.php?threads/belkin-f9k1102-tomato-bring-up.70850/post-327032|Support Information for 2021.3]]  +Belkin F9K1102 | v1/v3 | MIPS-R2 | 533 | 1 | 100 | 1 | - | N600 | 8MB | 32KB | 64MB | K26RT-N | [[https://www.linksysinfo.org/index.php?threads/belkin-f9k1102-tomato-bring-up.70850/post-327032|Support Information for 2021.3]] | 
-Belkin F9K1113   v2   ARM  | 800  | 1 |  1Gbps  | 1 | 1 | AC1200 | 16MB  | 64KB | 128MB  | K26ARM  | Supported from 2021.1 \\ Additional cooling may be required. This router can get hot due to its design. [[https://www.linksysinfo.org/index.php?threads/belkin-f9k1113v2-firmware-testing.76214/|Thread]] \\ (wl0 is 5 GHz radio). | +Belkin F9K1113 | v2 | ARM | 800 | 1 | 1000 | 1 | 1 | AC1200 | 16MB | 64KB | 128MB | K26ARM | Supported from 2021.1 \\ Additional cooling may be required. This router can get hot due to its design. [[https://www.linksysinfo.org/index.php?threads/belkin-f9k1113v2-firmware-testing.76214/|Thread]] \\ (wl0 is 5 GHz radio). | 
-Buffalo WHR‑G54S    | MIPSR1 | 200  | 1 | 100Mbps | - | - |  G54  | 4MB  | 32KB  | 16MB  | K26    +Buffalo WHR-G54S | | MIPS-R1 | 200 | 1 | 100 | - | - | G54 | 4MB | 32KB | 16MB | K26 | | 
-Buffalo WHR‑G125    | MIPSR1 | 240  | 1 | 100Mbps | - | - |  G108  | 4MB  | 32KB  | 16MB  | K26    +Buffalo WHR-G125 | | MIPS-R1 | 240 | 1 | 100 | - | - | G108 | 4MB | 32KB | 16MB | K26 | | 
-Buffalo WHR‑HPG54    | MIPSR1 | 200  | 1 | 100Mbps | - | - |  G54  | 4MB  | 32KB  | 16MB  | K26    +Buffalo WHR-HP-G54 | | MIPS-R1 | 200 | 1 | 100 | - | - | G54 | 4MB | 32KB | 16MB | K26 | | 
-Buffalo WZR‑D1800H    | MIPSR2 | 600  | 1 |  1Gbps  | 1 | - | AC1750 | 128MB  | 64KB  | 128MB  | K26RT   +Buffalo WZR-D1800H | | MIPS-R2 | 600 | 1 | 1000 | 1 | - | AC1750 | 128MB | 64KB | 128MB | K26RT-N | | 
-| Buffalo WZR-1750DHP |   | ARM | 800 | 2 | 1Gbps | 1 | 1 | AC1750 | 128MB | 64KB | 512MB | K26ARM | [[https://www.linksysinfo.org/index.php?threads/buffalo-wzr-1750dhp-bricked.74962/#post-333522|please read first]]  +| Buffalo WZR-1750DHP | | ARM | 800 | 2 | 1000 | 1 | 1 | AC1750 | 128MB | 64KB | 512MB | K26ARM | [[https://www.linksysinfo.org/index.php?threads/buffalo-wzr-1750dhp-bricked.74962/#post-333522|please read first]] | 
-| CD‑R King CW‑5358U    | MIPSR2 | FIXME | FIXME | 100Mbps | 1 | - |  N300  | 8MB  | FIXME | 32MB  | FIXME |   +| CD-R King CW-5358U | | MIPS-R2 | FIXME | FIXME | 100 | 1 | - | N300 | 8MB | FIXME | 32MB | FIXME | | 
-Cisco M10 v2    | FIXME  | FIXME | FIXME | 100Mbps | - | - |  N300  | 4MB  | FIXME | 32MB  | K26RT   +Cisco M10 v2 | | FIXME | FIXME | FIXME | 100 | - | - | N300 | 4MB | FIXME | 32MB | K26RT-N | | 
-| D‑Link DIR‑320    | MIPSR1 | 240  | 1 | 100Mbps | 1 | - |  N150  | 4MB  | FIXME | 32MB  | K26    +| D-Link DIR-320 | | MIPS-R1 | 240 | 1 | 100 | 1 | - | N150 | 4MB | FIXME | 32MB | K26 | | 
-| D‑Link DIR‑620   C1  | MIPSR2 | 530  | 1 | 100Mbps | 1 | - |  N300  | 8MB  | FIXME | 64MB  | K26RT   +| D-Link DIR-620 | C1 | MIPS-R2 | 530 | 1 | 100 | 1 | - | N300 | 8MB | FIXME | 64MB | K26RT-N | | 
-| D‑Link DIR‑865L    | MIPSR2 | 600  | 1 |  1Gbps  | 1 | - | AC1750 | 16MB  | 32KB  | 256MB  | K26RTAC  | Supported from 2020.8. \\ NVRAM is limited to 32K. Use special build.  +| D-Link DIR-865L | | MIPS-R2 | 600 | 1 | 1000 | 1 | - | AC1750 | 16MB | 32KB | 256MB | K26RT-AC | Supported from 2020.8. \\ NVRAM is limited to 32K. Use special build. | 
-| D‑Link DIR‑868L  | A1/B1/C1 |  ARM  | 800  | 2 |  1Gbps  | - | 1 | AC1750 | 128MB  | 32KB  | 128MB  | K26ARM  | NVRAM is limited to 32K. Use special build.  +| D-Link DIR-868L | A1/B1/C1 | ARM | 800 | 2 | 1000 | - | 1 | AC1750 | 128MB | 32KB | 128MB | K26ARM | NVRAM is limited to 32K. Use special build. | 
-Fiboom HG320    | MIPSR2 | 533  | 1 | 100Mbps | 1 | - | FIXME | 16MB  | 32KB  | 256MB  | K26RT   +Fiboom HG320 | | MIPS-R2 | 533 | 1 | 100 | 1 | - | FIXME | 16MB | 32KB | 256MB | K26RT-N | | 
-Huawei WS880     ARM  | 800  | 2 |  1Gbps  | - | 1 | AC1750 | 128MB  | 64KB  | 128MB  | K26ARM    +Huawei WS880 | | ARM | 800 | 2 | 1000 | - | 1 | AC1750 | 128MB | 64KB | 128MB | K26ARM | | 
-Linksys E800    | MIPSR2 | 300  | 1 | 100Mbps | - | - |  N150  | 8MB  | 64KB  | 32MB  | K26RT   +Linksys E800 | | MIPS-R2 | 300 | 1 | 100 | - | - | N150 | 8MB | 64KB | 32MB | K26RT-N | | 
-Linksys E900    | MIPSR2 | 300  | 1 | 100Mbps | - | - |  N300  | 8MB  | 64KB  | 32MB  | K26RT   +Linksys E900 | | MIPS-R2 | 300 | 1 | 100 | - | - | N300 | 8MB | 64KB | 32MB | K26RT-N | | 
-Linksys E1000  | v1/v2/v2.1 | MIPSR2 | 300  | 1 | 100Mbps | - | - |  N300  | 4MB  | 32KB  | 32MB  | K26RT   +Linksys E1000 | v1/v2/v2.1 | MIPS-R2 | 300 | 1 | 100 | - | - | N300 | 4MB | 32KB | 32MB | K26RT-N | | 
-Linksys E1200   v1  | MIPSR2 | 300  | 1 | 100Mbps | - | - |  N300  | 4MB  | 64KB  | 32MB  | K26RT   +Linksys E1200 | v1 | MIPS-R2 | 300 | 1 | 100 | - | - | N300 | 4MB | 64KB | 32MB | K26RT-N | | 
-Linksys E1200   v2  | MIPSR2 | 300  | 1 | 100Mbps | - | - |  N300  | 8MB  | 64KB  | 32MB  | K26RT   +Linksys E1200 | v2 | MIPS-R2 | 300 | 1 | 100 | - | - | N300 | 8MB | 64KB | 32MB | K26RT-N | | 
-Linksys E1500    | MIPSR2 | 300  | 1 | 100Mbps | - | - |  N300  | 8MB  | 64KB  | 32MB  | K26RT   +Linksys E1500 | | MIPS-R2 | 300 | 1 | 100 | - | - | N300 | 8MB | 64KB | 32MB | K26RT-N | | 
-Linksys E1550    | MIPSR2 | 300  | 1 | 100Mbps | 1 | - |  N300  | 16MB  | 60KB  | 64MB  | K26RT   +Linksys E1550 | | MIPS-R2 | 300 | 1 | 100 | 1 | - | N300 | 16MB | 60KB | 64MB | K26RT-N | | 
-Linksys E2000    | MIPSR2 | 354  | 1 |  1Gbps  | - | - |  N300  | 8MB  | 60KB  | 32MB  | K26 or K26RT   +Linksys E2000 | | MIPS-R2 | 354 | 1 | 1000 | - | - | N300 | 8MB | 60KB | 32MB | K26 or K26RT-N | | 
-Linksys E2500   v1/v2  | MIPSR2 | 300  | 1 | 100Mbps | - | - |  N600  | 8MB  | 64KB  | 64MB  | K26RT | NVRAM is limited to 32kB.  +Linksys E2500 | v1/v2 | MIPS-R2 | 300 | 1 | 100 | - | - | N600 | 8MB | 64KB | 64MB | K26RT-N | NVRAM is limited to 32kB. | 
-Linksys E2500   v3  | MIPSR2 | 500  | 1 | 100Mbps | 1 | - |  N600  8MB  | 64KB  | 64MB  | K26RT | NVRAM is limited to 32kB.  +Linksys E2500 | v3 | MIPS-R2 | 500 | 1 | 100 | 1 | - | N600 | 16MB | 64KB | 64MB | K26RT-N | NVRAM is limited to 32kB. | 
-Linksys E3000    | MIPSR2 | 480  | 1 |  1Gbps  | 1 | - |  N600  | 8MB  | 60KB  | 64MB  | K26 or K26RT   +Linksys E3000 | | MIPS-R2 | 480 | 1 | 1000 | 1 | - | N600 | 8MB | 60KB | 64MB | K26 or K26RT-N | | 
-Linksys E3200    | MIPSR2 | 500  | 1 |  1Gbps  | 1 | - |  N600  | 16MB  | 64KB  | 64MB  | K26RT | NVRAM is limited to 32kB.  +Linksys E3200 | | MIPS-R2 | 500 | 1 | 1000 | 1 | - | N600 | 16MB | 64KB | 64MB | K26RT-N | NVRAM is limited to 32kB. | 
-Linksys E4200   v1  | MIPSR2 | 480  | 1 |  1Gbps  | 1 | - |  N750  | 16MB  | 60KB  | 64MB  | K26RT | v2 is not supported, due to its Marvell chipset.  +Linksys E4200 | v1 | MIPS-R2 | 480 | 1 | 1000 | 1 | - | N750 | 16MB | 60KB | 64MB | K26RT-N | v2 is not supported, due to its Marvell chipset. | 
-Linksys EA6200   v1   ARM  | 800  | 1 |  1Gbps  | - | 1 | AC900  | 128MB  | 64KB  | 128MB  | K26ARM  | CFE 32KB NVRAM Bug. \\ [[https://www.linksysinfo.org/index.php?threads/linksys-ea6200-ea6350v1-freshtomato-arm-discussion.74916|Please read the following before flashing]] \\ Single core (Use images ending with "…-64K-NOSMP.trx") \\ (wl0 is 5 GHz radio).  +Linksys EA6200 | v1 | ARM | 800 | 1 | 1000 | - | 1 | AC900 | 128MB | 64KB | 128MB | K26ARM | CFE 32KB NVRAM Bug. \\ [[https://www.linksysinfo.org/index.php?threads/linksys-ea6200-ea6350v1-freshtomato-arm-discussion.74916|Please read the following before flashing]] \\ Single core (Use images ending with "…-64K-NOSMP.trx") \\ (wl0 is 5 GHz radio). | 
-Linksys EA6300   v1   ARM  | 800  | 2 |  1Gbps  | - | 1 | AC1200 | 128MB  | 64KB  | 128MB  | K26ARM  | CFE 32KB NVRAM Bug. \\ [[https://www.linksysinfo.org/index.php?threads/guide-flash-linksys-ea6300v1-ea6400-ea6500v2-ea6700-ea6900v1-0-1-1-with-tomato.73877/|Please read the following before flashing]]  +Linksys EA6300 | v1 | ARM | 800 | 2 | 1000 | - | 1 | AC1200 | 128MB | 64KB | 128MB | K26ARM | CFE 32KB NVRAM Bug. \\ [[https://www.linksysinfo.org/index.php?threads/guide-flash-linksys-ea6300v1-ea6400-ea6500v2-ea6700-ea6900v1-0-1-1-with-tomato.73877/|Please read the following before flashing]] | 
-Linksys EA6350   v1   ARM  | 800  | 1 |  1Gbps  | - | 1 | AC1200 | 128MB  | 64KB  | 128MB  | K26ARM  | CFE 32KB NVRAM Bug. \\ [[https://www.linksysinfo.org/index.php?threads/linksys-ea6200-ea6350v1-freshtomato-arm-discussion.74916|Please read the following thread before flashing]] \\ Single core (please use the images ending with: "…-64K-NOSMP.trx" +Linksys EA6350 | v1 | ARM | 800 | 1 | 1000 | - | 1 | AC1200 | 128MB | 64KB | 128MB | K26ARM | CFE 32KB NVRAM Bug. \\ [[https://www.linksysinfo.org/index.php?threads/linksys-ea6200-ea6350v1-freshtomato-arm-discussion.74916|Please read the following thread before flashing]] \\ Single core (please use the images ending with: "…-64K-NOSMP.trx") | 
-| Linksys EA6350   v2   ARM  | 800  | 2 |  1Gbps  | - | 1 | AC1200 | 128MB  | 64KB  | 128MB  | K26ARM  | Supported from 2022.1**.** More info [[https://www.linksysinfo.org/index.php?threads/full-support-linksys-ea6350v2-announcement.77202|here]]  +| Linksys EA6350 | v2 | ARM | 800 | 2 | 1000 | - | 1 | AC1200 | 128MB | 64KB | 128MB | K26ARM | Supported from 2022.1**.** More info [[https://www.linksysinfo.org/index.php?threads/full-support-linksys-ea6350v2-announcement.77202|here]] | 
-Linksys EA6400     ARM  | 800  | 2 |  1Gbps  | - | 1 | AC1200 | 128MB  | 64KB  | 128MB  | K26ARM  | CFE 32KB NVRAM Bug. \\ [[https://www.linksysinfo.org/index.php?threads/guide-flash-linksys-ea6300v1-ea6400-ea6500v2-ea6700-ea6900v1-0-1-1-with-tomato.73877/|Please read the following thread before flashing]]  +Linksys EA6400 | | ARM | 800 | 2 | 1000 | - | 1 | AC1200 | 128MB | 64KB | 128MB | K26ARM | CFE 32KB NVRAM Bug. \\ [[https://www.linksysinfo.org/index.php?threads/guide-flash-linksys-ea6300v1-ea6400-ea6500v2-ea6700-ea6900v1-0-1-1-with-tomato.73877/|Please read the following thread before flashing]] | 
-Linksys EA6500   v2   ARM  | 800  | 2 |  1Gbps  | 1 | 1 | AC1750 | 128MB  | 64KB  | 256MB  | K26ARM  | CFE 32KB NVRAM Bug. \\ [[https://www.linksysinfo.org/index.php?threads/guide-flash-linksys-ea6300v1-ea6400-ea6500v2-ea6700-ea6900v1-0-1-1-with-tomato.73877|Please read the following thread before flashing]]  +Linksys EA6500 | v2 | ARM | 800 | 2 | 1000 | 1 | 1 | AC1750 | 128MB | 64KB | 256MB | K26ARM | CFE 32KB NVRAM Bug. \\ [[https://www.linksysinfo.org/index.php?threads/guide-flash-linksys-ea6300v1-ea6400-ea6500v2-ea6700-ea6900v1-0-1-1-with-tomato.73877|Please read the following thread before flashing]] | 
-Linksys EA6700     ARM  | 800  | 2 |  1Gbps  | 1 | 1 | AC1750 | 128MB  | 64KB  | 256MB  | K26ARM  | CFE 32KB NVRAM Bug. \\ [[https://www.linksysinfo.org/index.php?threads/guide-flash-linksys-ea6300v1-ea6400-ea6500v2-ea6700-ea6900v1-0-1-1-with-tomato.73877|Please read the following thread before flashing]]  +Linksys EA6700 | | ARM | 800 | 2 | 1000 | 1 | 1 | AC1750 | 128MB | 64KB | 256MB | K26ARM | CFE 32KB NVRAM Bug. \\ [[https://www.linksysinfo.org/index.php?threads/guide-flash-linksys-ea6300v1-ea6400-ea6500v2-ea6700-ea6900v1-0-1-1-with-tomato.73877|Please read the following thread before flashing]] | 
-Linksys EA6900  | v1/v1.1   ARM  | 800  | 2 |  1Gbps  | 1 | 1 | AC1900 | 128MB  | 64KB  | 256MB  | K26ARM  | CFE 32KB NVRAM Bug. \\ [[https://www.linksysinfo.org/index.php?threads/guide-flash-linksys-ea6300v1-ea6400-ea6500v2-ea6700-ea6900v1-0-1-1-with-tomato.73877/|Please read the following thread before flashing]]  +Linksys EA6900 | v1/v1.1 | ARM | 800 | 2 | 1000 | 1 | 1 | AC1900 | 128MB | 64KB | 256MB | K26ARM | CFE 32KB NVRAM Bug. \\ [[https://www.linksysinfo.org/index.php?threads/guide-flash-linksys-ea6300v1-ea6400-ea6500v2-ea6700-ea6900v1-0-1-1-with-tomato.73877/|Please read the following thread before flashing]] | 
-Linksys WRT54GL  | v1/v1.1  | MIPSR1 | 200  | 1 | 100Mbps | - | - |  G54  | 4MB  | 32KB  | 16MB  | K26    +Linksys WRT54GL | v1/v1.1 | MIPS-R1 | 200 | 1 | 100 | - | - | G54 | 4MB | 32KB | 16MB | K26 | | 
-Linksys WRT54G/GS  | v2/v3/v4 | MIPSR1 | 240  | 1 | 100Mbps | - | - |  G54  | 48MB  | 32KB  | 3264MB  | K26    +Linksys WRT54G/GS | v2/v3/v4 | MIPS-R1 | 240 | 1 | 100 | - | - | G54 | 4-8MB | 32KB | 32-64MB | K26 | | 
-Linksys WRTSL54GS    | MIPSR1 | 266  | 1 | 100Mbps | 1 | - |  G54  | 8MB  | 32KB  | 32MB  | K26    +Linksys WRTSL54GS | | MIPS-R1 | 266 | 1 | 100 | 1 | - | G54 | 8MB | 32KB | 32MB | K26 | | 
-Linksys WRT160N   v1  | MIPSR1 | 266  | 1 | 100Mbps | - | - |  N300  | 4MB  | 32KB  | 32MB  | K26    +Linksys WRT160N | v1 | MIPS-R1 | 266 | 1 | 100 | - | - | N300 | 4MB | 32KB | 32MB | K26 | | 
-Linksys WRT160N   v3  | MIPSR2 | 300  | 1 | 100Mbps | - | - |  N300  | 4MB  | 32KB  | 32MB  | K26    +Linksys WRT160N | v3 | MIPS-R2 | 300 | 1 | 100 | - | - | N300 | 4MB | 32KB | 32MB | K26 | | 
-Linksys WRT300N   v1  | MIPSR1 | 264  | 1 | 100Mbps | - | - |  N300  | 4MB  | 32KB  | 32MB  | K26    +Linksys WRT300N | v1 | MIPS-R1 | 264 | 1 | 100 | - | - | N300 | 4MB | 32KB | 32MB | K26 | | 
-Linksys WRT310N   v2  | MIPSR2 | 300  | 1 |  1Gbps  | - | - |  N300  | 4MB  | 32KB  | 32MB  | K26  | Same as WRT160N v3  +Linksys WRT310N | v2 | MIPS-R2 | 300 | 1 | 1000 | - | - | N300 | 4MB | 32KB | 32MB | K26 | Same as WRT160N v3 | 
-Linksys WRT320N    | MIPSR2 | 354  | 1 |  1Gbps  | - | - |  N300  | 8MB  | 32KB  | 32MB  | K26    +Linksys WRT320N | | MIPS-R2 | 354 | 1 | 1000 | - | - | N300 | 8MB | 32KB | 32MB | K26 | | 
-Linksys WRT610N   v2  | MIPSR2 | 480  | 1 |  1Gbps  | 1 | - |  N300  | 8MB  | 32KB  | 64MB  | K26    +Linksys WRT610N | v2 | MIPS-R2 | 480 | 1 | 1000 | 1 | - | N300 | 8MB | 32KB | 64MB | K26 | | 
-| Netgear AC1450     ARM  | 800  | 2 |  1Gbps  | - | 1 | AC1750 | 128MB  | 64KB  | 256MB  | K26ARM  | Supported from 2022.3 \\ [[https://www.linksysinfo.org/index.php?threads/netgear-ac1450.77269/|Additional help here]]  +| Netgear AC1450 | | ARM | 800 | 2 | 1000 | - | 1 | AC1750 | 128MB | 64KB | 256MB | K26ARM | Supported from 2022.3 \\ [[https://www.linksysinfo.org/index.php?threads/netgear-ac1450.77269/|Additional help here]] | 
-Netgear R6250     ARM  | 800  | 2 |  1Gbps  | - | 1 | AC1600 | 128MB  | 64KB  | 256MB  | K26ARM    +Netgear R6250 | | ARM | 800 | 2 | 1000 | - | 1 | AC1600 | 128MB | 64KB | 256MB | K26ARM | | 
-Netgear R6300   v1  | MIPSR2 | 600  | 1 |  1Gbps  | 2 | 1 | AC1750 | 128MB  | 64KB  | 128MB  | K26RT-AC    +Netgear R6300 | v1 | MIPS-R2 | 600 | 1 | 1000 | 2 | 1 | AC1750 | 128MB | 64KB | 128MB | K26RT-AC | | 
-Netgear R6300   v2   ARM  | 800  | 2 |  1Gbps  | 1 | 1 | AC1750 | 128MB  | 64KB  | 256MB  | K26ARM    +Netgear R6300 | v2 | ARM | 800 | 2 | 1000 | 1 | 1 | AC1750 | 128MB | 64KB | 256MB | K26ARM | | 
-Netgear R6400   v1   ARM  | 800  | 2 |  1Gbps  | 1 | 1 | AC1750 | 128MB  | 128KB  | 256MB  | K26ARM    +Netgear R6400 | v1 | ARM | 800 | 2 | 1000 | 1 | 1 | AC1750 | 128MB | 128KB | 256MB | K26ARM | | 
-Netgear R6400   v2   ARM  | 1000 | 2 |  1Gbps  | 1 | 1 | AC1750 | 128MB  | 128KB  | 256MB  | K26ARM    +Netgear R6400 | v2 | ARM | 1000 | 2 | 1000 | 1 | 1 | AC1750 | 128MB | 128KB | 256MB | K26ARM | | 
-Netgear R6700   v1   ARM  | 1000 | 2 |  1Gbps  | - | 1 | AC1750 | 128MB  | 64KB  | 256MB  | K26ARM  | Supported from 2020.8 | +Netgear R6700 | v1 | ARM | 1000 | 2 | 1000 | - | 1 | AC1750 | 128MB | 64KB | 256MB | K26ARM | Supported from 2020.8 \\ \\ Note: Do not enable JFFS with firmware ** less than 2022.1 for R6900, R7000 and R6700v1 (it will delete board_data partition!)** 
-Netgear R6700   v3   ARM  | 1000 | 2 |  1Gbps  | 1 | 1 | AC1750 | 128MB  | 128KB  | 256MB (512MB)  | K26ARM  | Note: Some router can have 512 MB RAM. Images for both variants are provided:\\ "...-AIO-128K-512M.trx" (support for 512 MB RAM)\\ "...-AIO-128K.trx" (support up to 256 MB RAM)\\ Note 2: If not sure or unknown, just use the 512 MB RAM version, will work always  +Netgear R6700 | v3 | ARM | 1000 | 2 | 1000 | 1 | 1 | AC1750 | 128MB | 128KB | 256MB (512MB) | K26ARM | Note: Some router can have 512 MB RAM. Images for both variants are provided:\\ "...-AIO-128K-512M.trx" (support for 512 MB RAM)\\ "...-AIO-128K.trx" (support up to 256 MB RAM)\\ Note 2: If not sure or unknown, just use the 512 MB RAM version, will work always | 
-Netgear R6900   v1   ARM  | 1000 | 2 |  1Gbps  | - | 1 | AC1900 | 128MB  | 64KB | 256MB  | K26ARM  | Supported from 2021.3 | +Netgear R6900 | v1 | ARM | 1000 | 2 | 1000 | - | 1 | AC1900 | 128MB | 64KB | 256MB | K26ARM | Supported from 2021.3 \\ \\ Note: Do not enable JFFS with firmware ** less than 2022.1 for R6900, R7000 and R6700v1 (it will delete board_data partition!)** 
-Netgear R7000     ARM  | 1000 | 2 |  1Gbps  | 1 | 1 | AC1900 | 128MB  | 64KB  | 256MB  | K26ARM  | If you have a custom CFE like Vortex 1.3.0.7, please flash back your original Netgear cfe / bootloader before updating to Freshtomato 2020.3 and newer.  +Netgear R7000 | | ARM | 1000 | 2 | 1000 | 1 | 1 | AC1900 | 128MB | 64KB | 256MB | K26ARM | Note: Do not enable JFFS with firmware ** less than 2022.1 for R6900, R7000 and R6700v1 (it will delete board_data partition!)** \\ \\ Note 2: If you have a custom CFE like Vortex 1.3.0.7, please flash back your original Netgear cfe / bootloader before updating to Freshtomato 2020.3 and newer. | 
-| Netgear R7900     ARM  | 1000 | 2 |  1Gbps  | - | 1 | AC3000 | 128MB  | 64KB  | 512MB (256 MB?)  | K26ARM7  | Supported from 2022.X (tbd.)  +| Netgear R7900 | | ARM | 1000 | 2 | 1000 | - | 1 | AC3000 | 128MB | 64KB | 512MB (256 MB?) | K26ARM7 | Supported from 2022.
-Netgear R8000     ARM  | 1000 | 2 |  1Gbps  | 1 | 1 | AC3200 | 128MB  | 64KB  | 256MB  | K26ARM7    +Netgear R8000 | | ARM | 1000 | 2 | 1000 | 1 | 1 | AC3200 | 128MB | 64KB | 256MB | K26ARM7 | Note: Do not enable JFFS with firmware ** less than 2022.3 for R8000 (it can delete/damage board_data partition!)** 
-Netgear XR300     ARM  | 1000 | 2 |  1Gbps  | - | 1 | AC1750 | 128MB  | 128KB  | 512MB  | K26ARM  | Supported from 2021.1\\ (images ending with "…-128K-512M.trx") | +Netgear XR300 | | ARM | 1000 | 2 | 1000 | - | 1 | AC1750 | 128MB | 128KB | 512MB | K26ARM | Supported from 2021.1\\ (images ending with "…-128K-512M.trx") | 
-Netgear WNR2000   v2  | MIPSR2 | 300  | 1 | 100Mbps | - | - |  N300  | 4MB  | 32KB  | 32MB  | K26  | Flash storage limited to about 3.5MB, so FT 2020.x IPv6 is the only current firmware that will fit.  +Netgear WNR2000 | v2 | MIPS-R2 | 300 | 1 | 100 | - | - | N300 | 4MB | 32KB | 32MB | K26 | Flash storage limited to about 3.5MB, so FT 2020.x IPv6 is the only current firmware that will fit. | 
-Netgear WNR3500   v2  | MIPSR2 | 453  | 1 |  1Gbps  | - | - |  N300  | 3.5MB  | 32KB  | 32MB  | K26  | Due to hard-coded jffs2 partition, flash size is reduced to only 3,473,408 bytes. As of today, FT 2020.x MiniIPV6 is 3,407,872 bytes and is the only image type that will fit.  +Netgear WNR3500 | v2 | MIPS-R2 | 453 | 1 | 1000 | - | - | N300 | 3.5MB | 32KB | 32MB | K26 | Due to hard-coded jffs2 partition, flash size is reduced to only 3,473,408 bytes. As of today, FT 2020.x MiniIPV6 is 3,407,872 bytes and is the only image type that will fit. | 
-Netgear WNR3500L   v1  | MIPSR2 | 453  | 1 |  1Gbps  | 1 | - |  N300  | 8MB  | 32KB  | 64MB  | K26    +Netgear WNR3500L | v1 | MIPS-R2 | 453 | 1 | 1000 | 1 | - | N300 | 8MB | 32KB | 64MB | K26 | | 
-Netgear WNR3500L   v2  | MIPSR2 | 480  | 1 |  1Gbps  | 1 | - |  N300  | 32MB  | 32KB  | 128MB  | K26RT | Please use only images with the name "freshtomato-Netgear-3500Lv2-K26USB_RT-N5x-XXXX.chk" (AIO or VPN version).  +Netgear WNR3500L | v2 | MIPS-R2 | 480 | 1 | 1000 | 1 | - | N300 | 32MB | 32KB | 128MB | K26RT-N | Please use only images with the name "freshtomato-Netgear-3500Lv2-K26USB_RT-N5x-XXXX.chk" (AIO or VPN version). | 
-Netgear WNDR3400   v1  | MIPSR2 | 480  | 1 | 100Mbps | 1 | - |  N600  | 8MB  | 64KB  | 64MB  | K26RT   +Netgear WNDR3400 | v1 | MIPS-R2 | 480 | 1 | 100 | 1 | - | N600 | 8MB | 64KB | 64MB | K26RT-N | | 
-Netgear WNDR3400   v2/v3  | MIPSR2 | 530  | 1 | 100Mbps | 1 | - |  N600  | 8MB  | 64KB  | 64MB  | K26RT | Has a 5GHz USB Radio.  +Netgear WNDR3400 | v2/v3 | MIPS-R2 | 530 | 1 | 100 | 1 | - | N600 | 8MB | 64KB | 64MB | K26RT-N | Has a 5GHz USB Radio. | 
-Netgear WNDR3700   v3  | MIPSR2 | 480  | 1 |  1Gbps  | 1 | - |  N600  | 8MB  | 64KB  | 64MB  | K26RT | Supported from 2020.6. | +Netgear WNDR3700 | v3 | MIPS-R2 | 480 | 1 | 1000 | 1 | - | N600 | 8MB | 64KB | 64MB | K26RT-N | Supported from 2020.6. | 
-Netgear WNDR4000    | MIPSR2 | 480  | 1 |  1Gbps  | 1 |    N750  | 8MB  | 64KB  | 64MB  | K26RT | Supported from 2020.6. | +Netgear WNDR4000 | | MIPS-R2 | 480 | 1 | 1000 | 1 | | N750 | 8MB | 64KB | 64MB | K26RT-N | Supported from 2020.6. | 
-Netgear WNDR4500   v1  | MIPSR2 | 600  | 1 |  1Gbps  | 2 | - |  N900  | 128MB  | 64KB  | 128MB  | K26RTAC  | At least up to 2022.2, the LEDs do not function.  +Netgear WNDR4500 | v1 | MIPS-R2 | 600 | 1 | 1000 | 2 | - | N900 | 128MB | 64KB | 128MB | K26RT-AC | At least up to 2022.2, the LEDs do not function. | 
-Netgear WNDR4500   v2  | MIPSR2 | 600  | 1 |  1Gbps  | 2 | - |  N900  | 128MB  | 64KB  | 128MB  | K26RTAC    +Netgear WNDR4500 | v2 | MIPS-R2 | 600 | 1 | 1000 | 2 | - | N900 | 128MB | 64KB | 128MB | K26RT-AC | | 
-Ovislink WL1600GL    | MIPSR1 | 240  | 1 | 100Mbps | - | - |  G125  | 4MB  | FIXME | 16MB  | K26    +Ovislink WL1600GL | | MIPS-R1 | 240 | 1 | 100 | - | - | G125 | 4MB | FIXME | 16MB | K26 | | 
-Tenda AC15   v1.0   ARM  | 800  | 2 |  1Gbps  | - | 1 | AC1900 | 16MB  | 64KB  | 256MB  | K26ARM    +Tenda AC15 | v1.0 | ARM | 800 | 2 | 1000 | - | 1 | AC1900 | 16MB | 64KB | 256MB | K26ARM | | 
-Tenda AC18   v1.0   ARM  | 800  | 2 |  1Gbps  | - | 1 | AC1900 | 128MB  | 64KB  | 256MB  | K26ARM    +Tenda AC18 | v1.0 | ARM | 800 | 2 | 1000 | - | 1 | AC1900 | 128MB | 64KB | 256MB | K26ARM | | 
-Tenda N6    | MIPSR2 | 300  | 1 | 100Mbps | - | - |  N600  | 8MB  | FIXME | 64MB  | K26RT   +Tenda N6 | | MIPS-R2 | 300 | 1 | 100 | - | - | N600 | 8MB | FIXME | 64MB | K26RT-N | | 
-Tenda N60    | MIPSR2 | 500  | 1 |  1Gbps  | 1 | - |  N600  | 8MB  | FIXME | 64MB  | K26RT   +Tenda N60 | | MIPS-R2 | 500 | 1 | 1000 | 1 | - | N600 | 8MB | FIXME | 64MB | K26RT-N | | 
-Tenda N80    | MIPSR2 | 500  | 1 |  1Gbps  | 1 | - |  N900  | 8MB  | FIXME | 128MB  | K26RT   +Tenda N80 | | MIPS-R2 | 500 | 1 | 1000 | 1 | - | N900 | 8MB | FIXME | 128MB | K26RT-N | | 
-Tenda W1800R    | MIPSR2 | 600  | 1 |  1Gbps  | 2 | - | AC1750 | 16MB  | FIXME | 256MB  | K26RTAC    +Tenda W1800R | | MIPS-R2 | 600 | 1 | 1000 | 2 | - | AC1750 | 16MB | FIXME | 256MB | K26RT-AC | | 
-Xiaomi Mi R1D     ARM  | 1000 | 2 |  1Gbps  | 1 | - | AC1200 | 128MB  | 64KB  | 256MB  | K26ARM  | **IMPORTANT :** This unit may be  bricked if you attempt to FULLY erase NVRAM. Resetting values to defaults works safely. To access the CFE when you have the stock xVortex CFE, you must power on the unit while holding the Reset button for 10 seconds. [[https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1139833#1139833|Details]] \\   \\ Please use the images with ending "…-Custom-64K.trx"\\ \\ (wl0 is the 5 GHz radio).  +Xiaomi Mi R1D | | ARM | 1000 | 2 | 1000 | 1 | - | AC1200 | 128MB | 64KB | 256MB | K26ARM | **IMPORTANT :** This unit may be  bricked if you attempt to FULLY erase NVRAM. Resetting values to defaults works safely. To access the CFE when you have the stock xVortex CFE, you must power on the unit while holding the Reset button for 10 seconds. [[https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1139833#1139833|Details]] \\   \\ Please use the images with ending "…-Custom-64K.trx"\\ \\ (wl0 is the 5 GHz radio). | 
-ZTE ZXV10 H618B    | MIPSR1 | 240  | 1 | 100Mbps | 1 | - |  G54  | 16MB  | FIXME | 32MB  | K26    +ZTE ZXV10 H618B | | MIPS-R1 | 240 | 1 | 100 | 1 | - | G54 | 16MB | FIXME | 32MB | K26 | | 
-ZTE H218N    | MIPSR2 | 500  | 1 |  1Gbps  | 1 | - |  N300  | 16MB  | FIXME | 64MB  | K26RT   |+ZTE H218N | | MIPS-R2 | 500 | 1 | 1000 | 1 | - | N300 | 16MB | FIXME | 64MB | K26RT-N | |
  
 </sortable> </sortable>
  
  
hardware_compatibility.txt · Last modified: 2022/11/04 18:15 by pedro