This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revision | Next revisionBoth sides next revision | ||
hardware_compatibility [2023/05/04 06:57] – Add SDK Version for each router m_ars | hardware_compatibility [2023/06/26 15:55] – add WNR3500L v1 Image Size limit info m_ars | ||
---|---|---|---|
Line 103: | Line 103: | ||
| Netgear WNR2000 | v2 | MIPS-R2 | 300 | 1 | 100 | - | - | N300 | 4MB | 32KB | 32MB | K26 (SDK5.10) | Flash storage limited to about 3.5MB, so FT 2020.x IPv6 is the only current firmware that will fit. | | | Netgear WNR2000 | v2 | MIPS-R2 | 300 | 1 | 100 | - | - | N300 | 4MB | 32KB | 32MB | K26 (SDK5.10) | Flash storage limited to about 3.5MB, so FT 2020.x IPv6 is the only current firmware that will fit. | | ||
| Netgear WNR3500 | v2 | MIPS-R2 | 453 | 1 | 1000 | - | - | N300 | 3.5MB | 32KB | 32MB | K26 (SDK5.10) | Due to hard-coded jffs2 partition, flash size is reduced to only 3,473,408 bytes. As of today, FT 2020.x MiniIPV6 is 3,407,872 bytes and is the only image type that will fit. | | | Netgear WNR3500 | v2 | MIPS-R2 | 453 | 1 | 1000 | - | - | N300 | 3.5MB | 32KB | 32MB | K26 (SDK5.10) | Due to hard-coded jffs2 partition, flash size is reduced to only 3,473,408 bytes. As of today, FT 2020.x MiniIPV6 is 3,407,872 bytes and is the only image type that will fit. | | ||
- | | Netgear WNR3500L | v1 | MIPS-R2 | 453 | 1 | 1000 | 1 | - | N300 | 8MB | 32KB | 64MB | K26 (SDK5.10) | | + | | Netgear WNR3500L | v1 | MIPS-R2 | 453 | 1 | 1000 | 1 | - | N300 | 8MB | 32KB | 64MB | K26 (SDK5.10) | **NOTE:** image must be smaller than ~7.3 MB (7, |
| Netgear WNR3500L | v2 | MIPS-R2 | 480 | 1 | 1000 | 1 | - | N300 | 32MB | 32KB | 128MB | K26RT-N (SDK5.110) | Please use only images with the name " | | Netgear WNR3500L | v2 | MIPS-R2 | 480 | 1 | 1000 | 1 | - | N300 | 32MB | 32KB | 128MB | K26RT-N (SDK5.110) | Please use only images with the name " | ||
| Netgear WNDR3400 | v1 | MIPS-R2 | 480 | 1 | 100 | 1 | - | N600 | 8MB | 64KB | 64MB | K26RT-N (SDK5.110) | | | | Netgear WNDR3400 | v1 | MIPS-R2 | 480 | 1 | 100 | 1 | - | N600 | 8MB | 64KB | 64MB | K26RT-N (SDK5.110) | | |