Site Tools


hardware_compatibility

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
hardware_compatibility [2021/07/07 13:29] hogwildhardware_compatibility [2024/03/26 08:48] (current) – add Netgear EX7000 [WIP] has 16MB flash m_ars
Line 1: Line 1:
-====== Hardware Compatibility ======+====== Hardware (Router) Compatibility ======
  
-The FreshTomato project offers downloads for the following devices:+ \\  The FreshTomato project offers support for the following routers \\   \\
  
 <sortable> <sortable>
  
-^ Model  ^ Rev  ^ CPU Type  CPU Freq  ^ LAN  ^ USB2  ^ USB3  ^ WiFi  ^ Flash  ^ NVRAM  ^ RAM  Version  ^ Notes  +^ Model  ^  Rev  ^ CPU Type ^ MHz ^ CPUs ^ LAN ^ USB2 ^ USB3 ^ WiFi ^ Flash ^ NVRAM ^ RAM ^ Build (SDK) ^ Notes ^ 
-| Asus RT-N10P  |   | MIPS-R2  | 300  | 100 Mbps  | -  | -  n300  | 8MB  | 32KB  | 32MB  | K26RT-N  |   | +| Asus DSL-AC68U |   | ARM | 800 | 2 | 1000 | 1 | 1 | AC1900 | 128MB | 64KB | 256MB | K26ARM (SDK6.37) | [[https://www.linksysinfo.org/index.php?threads/ft-on-asus-dsl-ac68u-work-in-progress.75080| Supported from 2022.3 ]] \\ N**o DSL support. **This device is to be used as a router only. The WAN port is initialized to LAN port 1. | 
-| Asus RT-N10U  | A1/B1/C1  | MIPS-R2  | 300  | 100 Mbps  | 1  | -  n300  | 8MB  | 32KB  | 32MB  | K26RT-N  |   | +| Asus RT-N10P |   | MIPS-R2 | 300 | 1 | 100 | - | - | N300 | 8MB | 32KB | 32MB | K26RT-N (SDK5.110) |   | 
-| Asus RT-N12  | A1  | MIPS-R2  | 300  | 100 Mbps  | -  | -  n300  | 4MB  | 32KB  | 32MB  | K26  |   | +| Asus RT-N10U | A1/B1/C1 | MIPS-R2 | 300 | 1 | 100 | 1 | - | N300 | 8MB | 32KB | 32MB | K26RT-N (SDK5.110) |   | 
-| Asus RT-N12  | B1/C1/D1/VP/K/HP  | MIPS-R2  | 300  | 100 Mbps  | -  | -  n300  | 8MB  | 32KB  | 32MB  | K26RT-N  **NOTE:** High power hardware revision supported from 2020.4. | +| Asus RT-N12 | A1 | MIPS-R2 | 300 | 1 | 100 | - | - | N300 | 4MB | 32KB | 32MB | K26 (SDK5.10) |   | 
-| Asus RT-N15U  |   | MIPS-R2  | 500  | 1 Gbps  | 1  | -  n300  | 8MB  | 32KB  | 64MB  | K26RT-N  |   | +| Asus RT-N12 | B1/C1/D1 | MIPS-R2 | 300 | 1 | 100 | - | - | N300 | 8MB | 32KB | 32MB | K26RT-N (SDK5.110) |   | 
-| Asus RT-N16  |   | MIPS-R2  | 480  | 1 Gbps  | 2  | -  n300  | 32MB  | 32KB  | 128MB  | K26 or K26RT-N  | 32K NVRAM build required.  +| Asus RT-N12HP | A1/B1 | MIPS-R2 | 300 | 1 | 100 | - | - | N300 | 8MB | 32KB | 32MB | K26RT-N (SDK5.110) Support for High Power model added in 2020.4 
-| Asus RT-AC1750  | B1  | ARM  | 1000 x2  1 Gbps      ac1750          | Supported from 2021.3. | +| Asus RT-N12K |   | MIPS-R2 | 300 | 1 | 100 | - | - | N300 | 8MB | 32KB | 32MB | K26RT-N (SDK5.110) |   | 
-| Asus RT-N18U  |   | ARM  | 800  | 1 Gbps  | 1  | 1  n600  | 128MB  | 64KB  | 256MB  | K26ARM  | Single core (please use images ending with "…-64K-NOSMP.trx").  +| Asus RT-N12VP |   | MIPS-R2 | 300 | 1 | 100 | - | - | N300 | 8MB | 32KB | 32MB | K26RT-N (SDK5.110) |   
-| Asus RT-N53  |   | MIPS-R2  | 300  | 100 Mbps  | -  | -  n600  | 8MB  | 32KB  | 32MB  | K26RT-N  |   | +| Asus RT-N15U |   | MIPS-R2 | 500 | 1 | 1000 | 1 | - | N300 | 8MB | 32KB | 64MB | K26RT-N (SDK5.110) |   | 
-| Asus RT-N66U  |   | MIPS-R2  | 600  | 1 Gbps  | 2  | -  n900  | 32MB  | 64KB  | 256MB  | K26RT-N or K26RT-AC  |   | +| Asus RT-N16 |   | MIPS-R2 | 480 | 1 | 1000 | 2 | - | N300 | 32MB | 32KB | 128MB | K26 (SDK5.10) or K26RT-N (SDK5.110) | 32K NVRAM build required. | 
-| Asus RT-N66U  | C1 (a.k.a. B2)  | ARM  | 1000 x2  1 Gbps  | 1  | 1  n900  | 128MB  | 64KB  | 256MB  | K26ARM  | Supported from 2020.8 | +| Asus RT-AC1750 | B1 | ARM | 1000 | 1000 AC1750 128MB 64KB 256MB | K26ARM (SDK6.37) | Supported from 2021.3. | 
-| Asus RT-AC1900U  |                       | Supported from 2021.3. | +| Asus RT-N18U |   | ARM | 800 | 1 | 1000 | 1 | 1 | N600 | 128MB | 64KB | 256MB | K26ARM (SDK6.37) | Single core (please use images ending with "…-64K-NOSMP.trx"). | 
-| Asus RT-AC56S  |   | ARM  | 800  | 1 Gbps  | 1  | 1  ac1200  | 128MB  | 64KB  | 128MB  | K26ARM  | Single core (please use the images with ending "…-64K-NOSMP.trx").  +| Asus RT-N53 |   | MIPS-R2 | 300 | 1 | 100 | - | - | N600 | 8MB | 32KB | 32MB | K26RT-N (SDK5.110) |   | 
-| Asus RT-AC56U/ |   | ARM  | 800 x2  1 Gbps  | 1  | 1  ac1200  | 128MB  | 64KB  | 256MB  | K26ARM  |   | +| Asus RT-N66U |   | MIPS-R2 | 600 | 1 | 1000 | 2 | - | N900 | 32MB | 64KB | 256MB | K26RT-N (SDK5.110) or K26RT-AC |   | 
-| Asus RT-AC66U  | A1/A2/B1  | MIPS-R2  | 600  | 1 Gbps  | 2  | -  ac1750  | 32MB  | 64KB  | 256MB  | K26RT-AC  | This model is different from the RT-AC66U_B1, as this has two USB 2.0 ports at the rear of the router.  +| Asus RT-N66U | C1 (B2) | ARM | 1000 | 2 | 1000 | 1 | 1 | N900 | 128MB | 64KB | 256MB | K26ARM (SDK6.37) | Supported from 2020.8
-| Asus RT-AC66U_B1  |   | ARM  | 1000 x2  1 Gbps  | 1  | 1  ac1750  | 128MB  | 64KB  | 256MB  | K26ARM  Do not confuse this with the RT-AC66U Revision B1 above, which is a MIPS-R2 device. Check if the device has (blueUSB 3.x ports to be sure. Also, one USB port is at the front and the other one is at the rear.  +| Asus RT-AC1900U |   ARM 1000 1000 AC1900 128MB 64KB 256MB | K26ARM (SDK6.37) | Supported from 2021.3. \\ Note: [[firmware_basics_procedures|Upgrade from AsusWRT to FreshTomato]] 
-| Asus RT-AC67U  |   | ARM  | 1000 x2  1Gbps  | 1  | 1  ac1900  | 128MB  | 64KB  | 256MB  | K26ARM  | Supported from 2020.8. | +| Asus RT-AC56S |   | ARM | 800 | 1 | 1000 | 1 | 1 | AC1200 | 128MB | 64KB | 128MB | K26ARM (SDK6.37) | Single core (please use images ending with "…-64K-NOSMP.trx"). | 
-| Asus RT-AC68U/R/ | A1/A2/B1  | ARM  | 800 x2  1 Gbps  | 1  | 1  ac1900  | 128MB  | 64KB  | 256MB  | K26ARM  |   | +| Asus RT-AC56U/R |   | ARM | 800 | 2 | 1000 | 1 | 1 | AC1200 | 128MB | 64KB | 256MB | K26ARM (SDK6.37) |   | 
-| Asus RT-AC68U  | C1/E1/V3  | ARM  | 1000 x2  1 Gbps  | 1  | 1  ac1900  | 128MB  | 64KB  | 256MB  | K26ARM  Note for V3: Supported from 2021.3.\\ Note for C1/E1: Supported from 2019.3+| Asus RT-AC66U | A1/A2/B1 | MIPS-R2 | 600 | 1 | 1000 | 2 | - | AC1750 | 32MB | 64KB | 256MB | K26RT-AC (SDK6.30) | This model is different than the RT-AC66U_B1 below. This one is a MIPS-R2 device with two black USB 2.0 ports at the rear of the router. | 
-| Asus RT-AC68U  | B2  | ARM  | 1400 x2  1 Gbps  | 1  | 1  ac1900  | 128MB  | 64KB  | 256MB  | K26ARM  |   | +| Asus RT-AC66U_B1 |   | ARM | 1000 | 2 | 1000 | 1 | 1 | AC1750 | 128MB | 64KB | 256MB | K26ARM (SDK6.37) This model is different than the RT-AC66U above. This one is an ARM device with one blue USB 3.port at the front of the router and one black USB 2.0 port at the rear of the router. | 
-| Asus RT-AC1900P  |   | ARM  | 1400 x2  1 Gbps  | 1  | 1  ac1900  | 128MB  | 64KB  | 256MB  | K26ARM  |   | +| Asus RT-AC67U |   | ARM | 1000 | 2 | 1000 | 1 | 1 | AC1900 | 128MB | 64KB | 256MB | K26ARM (SDK6.37) | Supported from 2020.8. | 
-| Asus RT-AC3200  |   | ARM  | 1000 x2  1 Gbps  | 1  | 1  ac3200  | 128MB  64/128KB  | 256MB  | K26ARM7  | Please check NVRAM first (64KB default at release or 128KB after Asus update).\\ To get 128KB version FreshTomato flashed, you must first have Asus stock firmware V3.0.0.4.382.51374 installed.  +| Asus RT-AC68U/R/P | A1/A2/B1 | ARM | 800 | 2 | 1000 | 1 | 1 | AC1900 | 128MB | 64KB | 256MB | K26ARM (SDK6.37) |   | 
-| Asus WL-330gE  |   | MIPS-R1  | 240  | 100 Mbps  | -  | -  g54  | 4MB    | 16MB  | K26  |   | +| Asus RT-AC68U | C1/E1/V3 | ARM | 1000 | 2 | 1000 | 1 | 1 | AC1900 | 128MB | 64KB | 256MB | K26ARM (SDK6.37) C1/E1 supported from 2019.3 \\ V3 supported from 2021.3 \\ V4 NOT supported 
-| Asus WL-500GP  | v1/v2  | MIPS-R1  | 240  | 100 Mbps  | 2  | -  g54  | 8MB    | 32MB  | K26  |   | +| Asus RT-AC68U | B2 | ARM | 1400 | 2 | 1000 | 1 | 1 | AC1900 | 128MB | 64KB | 256MB | K26ARM (SDK6.37) |   | 
-| Asus WL-500W  |   | MIPS-R1  | 264  | 100 Mbps  | 2  | -  g54  | 8MB    | 32MB  | K26  |   | +| Asus RT-AC1900P |   | ARM | 1400 | 2 | 1000 | 1 | 1 | AC1900 | 128MB | 64KB | 256MB | K26ARM (SDK6.37) |   | 
-| Asus WL-520GU  |   | MIPS-R1  | 240  | 100 Mbps  | 1  | -  g54  | 4MB    | 16MB  | K26  |   | +| Asus RT-AC3200 |   | ARM | 1000 | 2 | 1000 | 1 | 1 | AC3200 | 128MB | 128KB | 256MB | K26ARM7 (SDK7) | Please check NVRAM first (64KB default at release or 128KB after Asus update). To get 128KB version FreshTomato flashed, you must first have Asus stock firmware V3.0.0.4.382.51374 installed. 
-| Belkin F5D          -  | -      | 64KB        +| Asus RT-AC3100 |   | ARM | 1400 | 2 | 1000 | 1 | 1 | AC3100 | 128MB | 128KB | 512MB | K26ARM714 (SDK714) | Supported from 2022.6 \\ [[https://www.linksysinfo.org/index.php?threads/asus-rt-ac3100-preview-for-ft.77620/|for more info please see]] | 
-| Belkin F7D3301/7301  | v1  | MIPS-R2  | 453  | 100 Mbps  | 2  | -  n300  | 8MB  | 32KB  | 64MB  | K26  |   | +| Asus RT-AC88U |   | ARM | 1400 | 2 | 1000 | 1 | 1 | AC3100 | 128MB | 128KB | 512MB | K26ARM714 (SDK714) | Supported from 2022.6 \\ [[https://www.linksysinfo.org/index.php?threads/asus-rt-ac88u-preview-for-ft.77661/|for more info please see]] \\ NOTE: This image will only support LAN Port 1 - 4 + WAN Port. The external RTL8365MB switch (LAN Port 5 - 8) will not be used/supported currently | 
-| Belkin F7D3302/7302  | v1  | MIPS-R2  | 453  | 100 Mbps  | 1  | -  n300  | 8MB  | 32KB  | 64MB  | K26  | Belkin F7D3302/7302.  +| Asus RT-AC5300 |   | ARM | 1400 | 2 | 1000 | 1 | 1 | AC5300 | 128MB | 128KB | 512MB | K26ARM714 (SDK714) | Supported from 2022.6 \\ [[https://www.linksysinfo.org/index.php?threads/asus-rt-ac5300-preview-for-ft.77592/|for more info please see]] (NOT Asus GT-AC5300) | 
-| Belkin F7D4302  ?  | MIPS-R2  533  | 100 Mbps  - ?  | -  a/n300  | 8MB  | 32KB  | 64MB  | K26    +| Asus TUF-AX3000_V2 |   | ARM | 1700 | 4 | 1000 | - | 1 | AX3000 | 256MB | 128KB | 512MB | K419ARM (HND 5.04AX) | 2.5G WAN (Internet) Port \\ Supported from 2023.3 and based on AsusWRT GPL 388.22525 \\ NOTE: AsusWRT GUI and Features + some FreshTomato Features (Status September 2023) 
-| Belkin F9K1102  | v1/v3 | MIPS-R2  | 533  | 100 Mbps | 1 | -  n600  | 8MB  | 32KB  | 64MB  | K26RT-N    +| Asus WL-330gE |   | MIPS-R1 | 240 | 1 | 100 | - | - | G54 | 4MB | FIXME | 16MB | K26 (SDK5.10) |   | 
-| Belkin F9K1113  | v2  | ARM  | 800  | 1000 Mbps  | 1  | 1  ac1200  | 16MB  | 64KB | 128MB  | K26ARM  | Supported from 2021.1\\ **NOTE: **Additional cooling may be required. This router can get hot due to its design. See [[https://www.linksysinfo.org/index.php?threads/belkin-f9k1113v2-firmware-testing.76214/|https://www.linksysinfo.org/index.php?threads/belkin-f9k1113v2-firmware-testing.76214/]]wl0 = 5GHz. | +| Asus WL-500GP | v1/v2 | MIPS-R1 | 240 | 1 | 100 | 2 | - | G54 | 8MB | FIXME | 32MB | K26 (SDK5.10) |   | 
-| Buffalo WHR-G54S  |   | MIPS-R1  | 200  | 100 Mbps  | -  | -  g54  | 4MB  | 32KB  | 16MB  | K26  |   | +| Asus WL-500W |   | MIPS-R1 | 264 | 1 | 100 | 2 | - | G54 | 8MB | FIXME | 32MB | K26 (SDK5.10) |   | 
-| Buffalo WHR-G125  |   | MIPS-R1  | 240  | 100 Mbps  | -  | -  g108  | 4MB  | 32KB  | 16MB  | K26  |   | +| Asus WL-520GU |   | MIPS-R1 | 240 | 1 | 100 | 1 | - | G54 | 4MB | 32KB | 16MB | K26 (SDK5.10) |   | 
-| Buffalo WHR-HP-G54  |   | MIPS-R1  | 200  | 100 Mbps  | -  | -  g54  | 4MB  | 32KB  | 16MB  | K26  |   | +| Belkin F5D8235 v3 MIPS-R2 533 1000 | 1 | - | N300 8MB | 64KB | 64MB K26 (SDK5.10) or K26RT-N (SDK5.110) Only v3 is Broadcom - based  
-| Buffalo WZR-D1800H  |   | MIPS-R2  | 600  | 1 Gbps  | 1  | -  ac1750  | 128MB  | 64KB  | 128MB  | K26RT-N  |   | +| Belkin F7D3301/7301 | v1 | MIPS-R2 | 453 | 1 | 100 | 2 | - | N300 | 8MB | 32KB | 64MB | K26 (SDK5.10) |   | 
-| CD-R King CW-5358U  |   | MIPS-R2    | 100 Mbps  | 1  | -  n300  | 8MB    | 32MB    |   | +| Belkin F7D3302/7302 | v1 | MIPS-R2 | 453 | 1 | 100 | 1 | - | N300 | 8MB | 32KB | 64MB | K26 (SDK5.10) | Belkin F7D3302/7302. | 
-| Cisco M10 v2  |       | 100 Mbps  | -  | -  n300  | 4MB    | 32MB  | K26RT-N  |   | +| Belkin F7D4302/F7D8302 v1 | MIPS-R2 | 453 | 1 | 100 | | - | A/N600 | 8MB | 32KB | 64MB | K26 (SDK5.10) or K26RT-N (SDK5.110) Belkin Play Wireless 
-| D-Link DIR-320  |   | MIPS-R1  | 240  | 100 Mbps  | 1  | -  n150  | 4MB    | 32MB  | K26  |   | +| Belkin F9K1102 | v1/v3 | MIPS-R2 | 533 | 1 | 100 | 1 | - | N600 | 8MB | 32KB | 64MB | K26RT-N (SDK5.110) [[https://www.linksysinfo.org/index.php?threads/belkin-f9k1102-tomato-bring-up.70850/post-327032|Support Information]] 
-| D-Link DIR-620  | C1  | MIPS-R2  | 530  | 100 Mbps  | 1  | -  n300  | 8MB    | 64MB  | K26RT-N  |   | +| Belkin F9K1113 | v2 | ARM | 800 | 1 | 1000 | 1 | 1 | AC1200 | 16MB | 64KB | 128MB | K26ARM (SDK6.37) | Supported from 2021.1 \\ Additional cooling may be required. This router can get hot due to its design. [[https://www.linksysinfo.org/index.php?threads/belkin-f9k1113v2-firmware-testing.76214/|Thread]] \\ (wl0 is 5 GHz radio). | 
-| D-Link DIR-865L  |   | MIPS-R2  | 600  | 1 Gbps  | 1  | -  ac1750  | 16MB  | 32KB  | 256MB  | K26RT-AC  | Supported from 2020.8.\\ NVRAM is limited to 32K. Use special build.  +| Buffalo WHR-G54S |   | MIPS-R1 | 200 | 1 | 100 | - | - | G54 | 4MB | 32KB | 16MB | K26 (SDK5.10) |   | 
-| D-Link DIR-868L  | A1/B1/C1  | ARM  | 800 x2  1 Gbps  | -  | 1  ac1750  | 128MB  | 32KB  | 128MB  | K26ARM  | NVRAM is limited to 32K. Use special build.  +| Buffalo WHR-G125 |   | MIPS-R1 | 240 | 1 | 100 | - | - | G108 | 4MB | 32KB | 16MB | K26 (SDK5.10) |   | 
-| Fiboom HG320  |   | MIPS-R2  | 533  | 100 Mbps  | 1  | -    | 16MB  | 32KB  | 256MB  | K26RT-N  |   | +| Buffalo WHR-HP-G54 |   | MIPS-R1 | 200 | 1 | 100 | - | - | G54 | 4MB | 32KB | 16MB | K26 (SDK5.10) |   | 
-| Huawei WS880  |   | ARM  | 800 x2  1 Gbps  | -  | 1  ac1750  | 128MB  | 64KB  | 128MB  | K26ARM  |   | +| Buffalo WZR-D1800H |   | MIPS-R2 | 600 | 1 | 1000 | 1 | - | AC1750 | 128MB | 64KB | 128MB | K26RT-N (SDK5.110) |   
-| Linksys E800  |   | MIPS-R2  | 300  | 100 Mbps  | -  | -  n150  | 8MB  | 64KB  | 32MB  | K26RT-N  |   | +| Buffalo WZR-1750DHP |   | ARM | 800 | 2 | 1000 | 1 | 1 | AC1750 | 128MB | 64KB | 512MB | K26ARM (SDK6.37) | [[https://www.linksysinfo.org/index.php?threads/buffalo-wzr-1750dhp-bricked.74962/#post-333522|please read first]] 
-| Linksys E900  |   | MIPS-R2  | 300  | 100 Mbps  | -  | -  n300  | 8MB  | 64KB  | 32MB  | K26RT-N  |   | +| CD-R King CW-5358U |   | MIPS-R2 | FIXME | FIXME | 100 | 1 | - | N300 | 8MB | FIXME | 32MB | FIXME |   | 
-| Linksys E1000  | v1/v2.0/v2.1  | MIPS-R2  | 300  | 100 Mbps  | -  | -  n300  | 4MB  | 32KB  | 32MB  | K26RT-N  |   | +| Cisco M10 v2 |   MIPS-R2  300 | 1 | 100 | - | - | N300 | 4MB | 32KB | 32MB | K26RT-N (SDK5.110) |   | 
-| Linksys E1200  | v1  | MIPS-R2  | 300  | 100 Mbps  | -  | -  n300  | 4MB  | 64KB  | 32MB  | K26RT-N  |   | +| D-Link DIR-320 |   | MIPS-R1 | 240 | 1 | 100 | 1 | - | N150 | 4MB | FIXME | 32MB | K26 (SDK5.10) |   | 
-| Linksys E1200  | v2  | MIPS-R2  | 300  | 100 Mbps  | -  | -  n300  | 8MB  | 64KB  | 32MB  | K26RT-N  |   | +| D-Link DIR-620 | C1 | MIPS-R2 | 530 | 1 | 100 | 1 | - | N300 | 8MB | FIXME | 64MB | K26RT-N (SDK5.110) |   | 
-| Linksys E1500  |   | MIPS-R2  | 300  | 100 Mbps  | -  | -  n300  | 8MB  | 64KB  | 32MB  | K26RT-N  |   | +| D-Link DIR-865L |   | MIPS-R2 | 600 | 1 | 1000 | 1 | - | AC1750 | 16MB | 32KB | 256MB | K26RT-AC (SDK6.30) | Supported from 2020.8. \\ NVRAM is limited to 32K. Use special build. | 
-| Linksys E1550  |   | MIPS-R2  | 300  | 100 Mbps  | 1  | -  n300  | 16MB  | 60KB  | 64MB  | K26RT-N  |   | +| D-Link DIR-868L | A1/B1/C1 | ARM | 800 | 2 | 1000 | - | 1 | AC1750 | 128MB | 32KB | 128MB | K26ARM (SDK6.37) | NVRAM is limited to 32K. Use special build. | 
-| Linksys E2000  |   | MIPS-R2  | 354  | 1 Gbps  | -  | -  n300  | 8MB  | 60KB  | 32MB  | K26 or K26RT-N  |   | +| Fiboom HG320 |   | MIPS-R2 | 533 | 1 | 100 | 1 | - | FIXME | 16MB | 32KB | 256MB | K26RT-N (SDK5.110) |   | 
-| Linksys E2500  | v1/v2  | MIPS-R2  | 300  | 100 Mbps  | -  | -  n600  | 8MB  | 64KB  | 64MB  | K26RT-N  | NVRAM is limited to 32kB.  +| Huawei WS880 |   | ARM | 800 | 2 | 1000 | - | 1 | AC1750 | 128MB | 64KB | 128MB | K26ARM (SDK6.37) |   | 
-| Linksys E2500  V3  | MIPS-R2  | 500  | 100 Mbps  | 1  | -  n600  8MB  | 64KB  | 64MB  | K26RT-N  | NVRAM is limited to 32kB.  +| Linksys E800 |   | MIPS-R2 | 300 | 1 | 100 | - | - | N150 | 8MB | 64KB | 32MB | K26RT-N (SDK5.110) |   | 
-| Linksys E3000  |   | MIPS-R2  | 480  | 1 Gbps  | 1  | -  n600  | 8MB  | 60KB  | 64MB  | K26 or K26RT-N  |   | +| Linksys E900 |   | MIPS-R2 | 300 | 1 | 100 | - | - | N300 | 8MB | 64KB | 32MB | K26RT-N (SDK5.110) |   | 
-| Linksys E3200  |   | MIPS-R2  | 500  | 1 Gbps  | 1  | -  n600  | 16MB  | 64KB  | 64MB  | K26RT-N  | NVRAM is limited to 32kB +| Linksys E1000 | v1/v2/v2.1 | MIPS-R2 | 300 | 1 | 100 | - | - | N300 | 4MB | 32KB | 32MB | K26RT-N (SDK5.110) |   | 
-| Linksys E4200  | v1  | MIPS-R2  | 480  | 1 Gbps  | 1  | -  n750  | 16MB  | 60KB  | 64MB  | K26RT-N  | v2 is not supported, due to its Marvell chipset.  +| Linksys E1200 | v1 | MIPS-R2 | 300 | 1 | 100 | - | - | N300 | 4MB | 64KB | 32MB | K26RT-N (SDK5.110) |   | 
-| Linksys EA6200  | v1  | ARM  | 800  | 1 Gbps  | -  | 1  ac900  | 128MB  | 64KB  | 128MB  | K26ARM  NOTE: CFE 32KB NVRAM Bug AND please read the following before flashing:\\ [[https://www.linksysinfo.org/index.php?threads/linksys-ea6200-ea6350v1-freshtomato-arm-discussion.74916/|https://www.linksysinfo.org/index.php?threads/linksys-ea6200-ea6350v1-freshtomato-arm-discussion.74916/]] \\ Single core (please use the images ending with "…-64K-NOSMP.trx")5GHz radio is listed first (wl0 is 5 GHz).  +| Linksys E1200 | v2 | MIPS-R2 | 300 | 1 | 100 | - | - | N300 | 8MB | 64KB | 32MB | K26RT-N (SDK5.110) |   | 
-| Linksys EA6300  | v1  | ARM  | 800 x2  1 Gbps  | -  | 1  ac1200  | 128MB  | 64KB  | 128MB  | K26ARM  NOTE: CFE 32KB NVRAM Bug AND please read the following before flashing:\\ [[https://www.linksysinfo.org/index.php?threads/guide-flash-linksys-ea6300v1-ea6400-ea6500v2-ea6700-ea6900v1-0-1-1-with-tomato.73877/|https://www.linksysinfo.org/index.php?threads/guide-flash-linksys-ea6300v1-ea6400-ea6500v2-ea6700-ea6900v1-0-1-1-with-tomato.73877/]]  +| Linksys E1500 |   | MIPS-R2 | 300 | 1 | 100 | - | - | N300 | 8MB | 64KB | 32MB | K26RT-N (SDK5.110) |   | 
-| Linksys EA6350  | v1  | ARM  | 800  | 1 Gbps  | -  | 1  ac1200  | 128MB  | 64KB  | 128MB  | K26ARM  NOTE: CFE 32KB NVRAM Bug AND please read the following thread before flashing:\\ [[https://www.linksysinfo.org/index.php?threads/linksys-ea6200-ea6350v1-freshtomato-arm-discussion.74916/|https://www.linksysinfo.org/index.php?threads/linksys-ea6200-ea6350v1-freshtomato-arm-discussion.74916/]] \\ Single core (please use the images ending with"…-64K-NOSMP.trx" +| Linksys E1550 |   | MIPS-R2 | 300 | 1 | 100 | 1 | - | N300 | 16MB | 60KB | 64MB | K26RT-N (SDK5.110) |   | 
-| Linksys EA6400    | ARM  | 800 x2  1 Gbps  | -  | 1  ac1200  | 128MB  | 64KB  | 128MB  | K26ARM  NOTE: CFE 32KB NVRAM Bug AND please read the following thread before flashing:\\ [[https://www.linksysinfo.org/index.php?threads/guide-flash-linksys-ea6300v1-ea6400-ea6500v2-ea6700-ea6900v1-0-1-1-with-tomato.73877/|https://www.linksysinfo.org/index.php?threads/guide-flash-linksys-ea6300v1-ea6400-ea6500v2-ea6700-ea6900v1-0-1-1-with-tomato.73877/]]  +| Linksys E2000 |   | MIPS-R2 | 354 | 1 | 1000 | - | - | N300 | 8MB | 60KB | 32MB | K26 (SDK5.10) or K26RT-N (SDK5.110) |   | 
-| Linksys EA6500  | v2  | ARM  | 800 x2  1 Gbps  | 1  | 1  ac1750  | 128MB  | 64KB  | 256MB  | K26ARM  NOTE: CFE 32KB NVRAM Bug AND please read the following thread before flashing:\\ [[https://www.linksysinfo.org/index.php?threads/guide-flash-linksys-ea6300v1-ea6400-ea6500v2-ea6700-ea6900v1-0-1-1-with-tomato.73877/|https://www.linksysinfo.org/index.php?threads/guide-flash-linksys-ea6300v1-ea6400-ea6500v2-ea6700-ea6900v1-0-1-1-with-tomato.73877/]]  +| Linksys E2500 | v1/v2 | MIPS-R2 | 300 | 1 | 100 | - | - | N600 | 8MB | 64KB | 64MB | K26RT-N (SDK5.110) | NVRAM is limited to 32kB. | 
-| Linksys EA6700  |   | ARM  | 800 x2  1 Gbps  | 1  | 1  ac1750  | 128MB  | 64KB  | 256MB  | K26ARM  NOTE: CFE 32KB NVRAM Bug! AND please read the following thread before flashing:\\ [[https://www.linksysinfo.org/index.php?threads/guide-flash-linksys-ea6300v1-ea6400-ea6500v2-ea6700-ea6900v1-0-1-1-with-tomato.73877/|https://www.linksysinfo.org/index.php?threads/guide-flash-linksys-ea6300v1-ea6400-ea6500v2-ea6700-ea6900v1-0-1-1-with-tomato.73877/]]  +| Linksys E2500 | v3 | MIPS-R2 | 500 | 1 | 100 | 1 | - | N600 16MB | 64KB | 64MB | K26RT-N (SDK5.110) | NVRAM is limited to 32kB. | 
-| Linksys EA6900  | v1/v1.1  | ARM  | 800 x2  1 Gbps  | 1  | 1  ac1900  | 128MB  | 64KB  | 256MB  | K26ARM  NOTE: CFE 32KB NVRAM Bug AND please read the following thread before flashing:\\ [[https://www.linksysinfo.org/index.php?threads/guide-flash-linksys-ea6300v1-ea6400-ea6500v2-ea6700-ea6900v1-0-1-1-with-tomato.73877/|https://www.linksysinfo.org/index.php?threads/guide-flash-linksys-ea6300v1-ea6400-ea6500v2-ea6700-ea6900v1-0-1-1-with-tomato.73877/]]  +| Linksys E3000 |   | MIPS-R2 | 480 | 1 | 1000 | 1 | - | N600 | 8MB | 60KB | 64MB | K26 (SDK5.10) or K26RT-N (SDK5.110) |   | 
-| Linksys WRT54GL  | v1/v1.1  | MIPS-R1  | 200  | 100 Mbps  | -  | -  g54  | 4MB  | 32KB  | 16MB  | K26  |   | +| Linksys E3200 |   | MIPS-R2 | 500 | 1 | 1000 | 1 | - | N600 | 16MB | 64KB | 64MB | K26RT-N (SDK5.110) 60K NVRAM. | 
-| Linksys WRT54G/GS  | v2-v4  | MIPS-R1  | 240  | 100 Mbps  | -  | -  g54  | 4-8MB  | 32KB  | 32-64MB  | K26  |   | +| Linksys E4200 | v1 | MIPS-R2 | 480 | 1 | 1000 | 1 | - | N750 | 16MB | 60KB | 64MB | K26RT-N (SDK5.110) | v2 is not supported, due to its Marvell chipset. | 
-| Linksys WRTSL54GS  |   | MIPS-R1  | 266  | 100 Mbps  | 1  | -  g54  | 8MB  | 32KB  | 32MB  | K26  |   | +| Linksys EA6200 | v1 | ARM | 800 | 1 | 1000 | - | 1 | AC900 | 128MB | 64KB | 128MB | K26ARM (SDK6.37) | CFE 32KB NVRAM Bug\\ [[https://www.linksysinfo.org/index.php?threads/linksys-ea6200-ea6350v1-freshtomato-arm-discussion.74916|Please read the following before flashing]] \\ Single core (Use images ending with "…-64K-NOSMP.trx"\\ (wl0 is 5 GHz radio). | 
-| Linksys WRT160N  | v1  | MIPS-R1  | 266  | 100 Mbps  | -  | -  n300  | 4MB  | 32KB  | 32MB  | K26  |   | +| Linksys EA6300 | v1 | ARM | 800 | 2 | 1000 | - | 1 | AC1200 | 128MB | 64KB | 128MB | K26ARM (SDK6.37) | CFE 32KB NVRAM Bug\\ [[https://www.linksysinfo.org/index.php?threads/guide-flash-linksys-ea6300v1-ea6400-ea6500v2-ea6700-ea6900v1-0-1-1-with-tomato.73877/|Please read the following before flashing]] | 
-| Linksys WRT160N  | v3  | MIPS-R2  | 300  | 100 Mbps  | -  | -  n300  | 4MB  | 32KB  | 32MB  | K26  |   | +| Linksys EA6350 | v1 | ARM | 800 | 1 | 1000 | - | 1 | AC1200 | 128MB | 64KB | 128MB | K26ARM (SDK6.37) | CFE 32KB NVRAM Bug\\ [[https://www.linksysinfo.org/index.php?threads/linksys-ea6200-ea6350v1-freshtomato-arm-discussion.74916|Please read the following thread before flashing]] \\ Single core (please use the images ending with"…-64K-NOSMP.trx") | 
-| Linksys WRT300N  | v1  | MIPS-R1  | 264  | 100 Mbps  | -  | -  n300  | 4MB  | 32KB  | 32MB  | K26  |   | +| Linksys EA6350 v2 | ARM | 800 | 2 | 1000 | - | 1 | AC1200 | 128MB | 64KB | 128MB | K26ARM (SDK6.37) Supported from 2022.1**.** More info [[https://www.linksysinfo.org/index.php?threads/full-support-linksys-ea6350v2-announcement.77202|here]] | 
-| Linksys WRT310N  | v2  | MIPS-R2  | 300  | 1 Gbps  | -  | -  n300  | 4MB  | 32KB  | 32MB  | K26  | Same as WRT160N v3  +| Linksys EA6400 |   | ARM | 800 | 2 | 1000 | | AC1200 | 128MB | 64KB | 128MB | K26ARM (SDK6.37) CFE 32KB NVRAM Bug. \\ [[https://www.linksysinfo.org/index.php?threads/guide-flash-linksys-ea6300v1-ea6400-ea6500v2-ea6700-ea6900v1-0-1-1-with-tomato.73877/|Please read the following thread before flashing]] | 
-| Linksys WRT320N  |   | MIPS-R2  | 354  | 1 Gbps  | -  | -  n300  | 8MB  | 32KB  | 32MB  | K26  |   | +| Linksys EA6500 | v2 | ARM | 800 | 2 | 1000 | 1 | 1 | AC1750 | 128MB | 64KB | 256MB | K26ARM (SDK6.37) | CFE 32KB NVRAM Bug\\ [[https://www.linksysinfo.org/index.php?threads/guide-flash-linksys-ea6300v1-ea6400-ea6500v2-ea6700-ea6900v1-0-1-1-with-tomato.73877|Please read the following thread before flashing]] | 
-| Linksys WRT610N  | v2  | MIPS-R2  | 480  | 1 Gbps  | 1  | -  n300  | 8MB  | 32KB  | 64MB  | K26  |   | +| Linksys EA6700 |   | ARM | 800 | 2 | 1000 | 1 | 1 | AC1750 | 128MB | 64KB | 256MB | K26ARM (SDK6.37) | CFE 32KB NVRAM Bug\\ [[https://www.linksysinfo.org/index.php?threads/guide-flash-linksys-ea6300v1-ea6400-ea6500v2-ea6700-ea6900v1-0-1-1-with-tomato.73877|Please read the following thread before flashing]] | 
-| Netgear R6250  |   | ARM  | 800 x2  | 1 Gbps  | -  | 1  ac1600  | 128MB  | 64KB  | 256MB  | K26ARM  |   | +| Linksys EA6900 | v1/v1.1 | ARM | 800 | 2 | 1000 | 1 | 1 | AC1900 | 128MB | 64KB | 256MB | K26ARM (SDK6.37) | CFE 32KB NVRAM Bug\\ [[https://www.linksysinfo.org/index.php?threads/guide-flash-linksys-ea6300v1-ea6400-ea6500v2-ea6700-ea6900v1-0-1-1-with-tomato.73877/|Please read the following thread before flashing]] | 
-| Netgear R6300  | v1  | MIPS-R2  | 600  | 1 Gbps  | 2  | 1  ac1750  | 128MB  | 64KB  | 128MB  | K26RT-AC  |   | +| Linksys WRT54GL | v1/v1.1 | MIPS-R1 | 200 | 1 | 100 | - | - | G54 | 4MB | 32KB | 16MB | K26 (SDK5.10) |   | 
-| Netgear R6300  | v2  | ARM  | 800 x2  1 Gbps  | 1  | 1  ac1750  | 128MB  | 64KB  | 256MB  | K26ARM  |   | +| Linksys WRT54G/GS | v2/v3/v4 | MIPS-R1 | 240 | 1 | 100 | - | - | G54 | 4-8MB | 32KB | 32-64MB | K26 (SDK5.10) |   | 
-| Netgear R6400  | v1  | ARM  | 800 x2  1 Gbps  | 1  | 1  ac1750  | 128MB  | 128KB  | 256MB  | K26ARM  |   | +| Linksys WRTSL54GS |   | MIPS-R1 | 266 | 1 | 100 | 1 | - | G54 | 8MB | 32KB | 32MB | K26 (SDK5.10) |   | 
-| Netgear R6400  | v2  | ARM  | 1000 x2  1 Gbps  | 1  | 1  ac1750  | 128MB  | 128KB  | 256MB  | K26ARM  |   | +| Linksys WRT160N | v1 | MIPS-R1 | 266 | 1 | 100 | - | - | N300 | 4MB | 32KB | 32MB | K26 (SDK5.10) |   | 
-| Netgear R6700  | v1  | ARM  | 1000 x2  1 Gbps  | -  | 1  ac1750  | 128MB  | 64KB  | 256MB  | K26ARM  | Supported from 2020.8 | +| Linksys WRT160N | v3 | MIPS-R2 | 300 | 1 | 100 | - | - | N300 | 4MB | 32KB | 32MB | K26 (SDK5.10) |   | 
-| Netgear R6700  | v3  | ARM  | 1000 x2  1 Gbps  | 1  | 1  ac1750  | 128MB  | 128KB  | 256MB  | K26ARM    +| Linksys WRT300N | v1 | MIPS-R1 | 264 | 1 | 100 | - | - | N300 | 4MB | 32KB | 32MB | K26 (SDK5.10) |   | 
-| Netgear R6900    | ARM  | 1000 x2  1 Gbps      ac1900        | K26ARM  | Supported from 2021.3 | +| Linksys WRT310N | v2 | MIPS-R2 | 300 | 1 | 1000 | - | - | N300 | 4MB | 32KB | 32MB | K26 (SDK5.10) | Same as WRT160N v3 | 
-| Netgear R7000  |   | ARM  | 1000 x2  1 Gbps  | 1  | 1  ac1900  | 128MB  | 64KB  | 256MB  | K26ARM  NOTEif you have a custom CFE like Vortex 1.3.0.7, please flash back your original Netgear cfe / bootloader before updating to Freshtomato 2020.3 and newer.  +| Linksys WRT320N |   | MIPS-R2 | 354 | 1 | 1000 | - | - | N300 | 8MB | 32KB | 32MB | K26 (SDK5.10) |   | 
-| Netgear R8000  |   | ARM  | 1000 x2  | 1 Gbps  | 1  | 1  ac3200  | 128MB  | 64KB  | 256MB  | K26ARM7    +| Linksys WRT610N | v2 | MIPS-R2 | 480 | 1 | 1000 | 1 | - | N300 | 8MB | 32KB | 64MB | K26 (SDK5.10) |   | 
-| Netgear XR300  |   | ARM  | 1000 x2  1 Gbps  | -  | 1  ac1750  | 128MB  | 128KB  | 512MB  | K26ARM  | Supported from 2021.1 | +| Netgear AC1450 |   | ARM | 800 | 2 | 1000 | - | 1 | AC1750 | 128MB | 64KB | 256MB | K26ARM (SDK6.37) | Supported from 2022.3 \\ [[https://www.linksysinfo.org/index.php?threads/netgear-ac1450.77269/|Additional help here]] | 
-| Netgear WNR2000  | v2  | MIPS-R2  | 300  | 100 Mbps  | -  | -  n300  | 4MB  | 32KB  | 32MB  | K26  | Flash storage limited to about 3.5MB, so FT 2020.x IPv6 is the only current firmware that will fit.  +| Netgear R6200 | v2 | ARM | 800 | 1 | 1000 | - | 1 | AC1200 | 128MB | 64KB | 256MB | K26ARM (SDK6.37) | Supported from 2023.5 \\ Flash information can be found here \\ [[https://www.linksysinfo.org/index.php?threads/added-support-coming-soon-for-the-netgear-r6200v2-router.78246/|Support Information]] | 
-| Netgear WNR3500  | v2  | MIPS-R2  | 453  | 1 Gbps  | -  | -  n300  | 3.5MB  | 32KB  | 32MB  | K26  | Due to hard-coded jffs2 partition, flash size is reduced to only 3,473,408 bytes. As of today, FT 2020.x MiniIPV6 is 3,407,872 bytes and is the only image type that will fit.  +| Netgear R6250 |   | ARM | 800 | 2 | 1000 | - | 1 | AC1600 | 128MB | 64KB | 256MB | K26ARM (SDK6.37) |   | 
-| Netgear WNR3500L  | v1  | MIPS-R2  | 453  | 1 Gbps  | 1  | -  n300  | 8MB  | 32KB  | 64MB  | K26    +| Netgear R6300 | v1 | MIPS-R2 | 600 | 1 | 1000 | 2 | 1 | AC1750 | 128MB | 64KB | 128MB | K26RT-AC (SDK6.30) |   | 
-| Netgear WNR3500L  | v2  | MIPS-R2  | 480  | 1 Gbps  | 1  | -  n300  | 32MB  | 32KB  | 128MB  | K26RT-N  | Please use only images with the name "freshtomato-Netgear-3500Lv2-K26USB_RT-N5x-XXXX.chk" (AIO or VPN version)  +| Netgear R6300 | v2 | ARM | 800 | 2 | 1000 | 1 | 1 | AC1750 | 128MB | 64KB | 256MB | K26ARM (SDK6.37) |   | 
-| Netgear WNDR3400  | v1  | MIPS-R2  | 480  | 100 Mbps  | 1  | -  n600  | 8MB  | 64KB  | 64MB  | K26RT-N  |   | +| Netgear R6400 | v1 | ARM | 800 | 2 | 1000 | 1 | 1 | AC1750 | 128MB | 128KB | 256MB | K26ARM (SDK6.37) |   | 
-| Netgear WNDR3400  | v2/v3  | MIPS-R2  | 530  | 100 Mbps  | 1  | -  n600  | 8MB  | 64KB  | 64MB  | K26RT-N  Has a 5GHz USB Radio +| Netgear R6400 | v2 | ARM | 1000 | 2 | 1000 | 1 | 1 | AC1750 | 128MB | 128KB | 256MB | K26ARM (SDK6.37) |   | 
-| Netgear WNDR3700  | v3  | MIPS-R2  | 480  | 1 Gbps  | 1  | -  n600  | 8MB  | 64KB  | 64MB  | K26RT-N  | Supported from 2020.6. | +| Netgear R6700 | v1 | ARM | 1000 | 2 | 1000 | - | 1 | AC1750 | 128MB | 64KB | 256MB | K26ARM (SDK6.37) | Supported from 2020.8 \\ \\ Note: Do not enable JFFS with firmware ** less than 2022.1 for R6900, R7000 and R6700v1 (it will delete board_data partition!)** 
-| Netgear WNDR4000  |   | MIPS-R2  | 480  | 1 Gbps  | 1  |   n750  | 8MB  | 64KB  | 64MB  | K26RT-N  | Supported from 2020.6. | +| Netgear R6700 | v3 | ARM | 1000 | 2 | 1000 | 1 | 1 | AC1750 | 128MB | 128KB | 256MB (512MB) | K26ARM (SDK6.37) Note: Some router can have 512 MB RAM. Images for both variants are provided:\\ "...-AIO-128K-512M.trx" (support for 512 MB RAM)\\ "...-AIO-128K.trx" (support up to 256 MB RAM)\\ Note 2: If not sure or unknown, just use the 512 MB RAM version, will work always 
-| Netgear WNDR4500  | v1  | MIPS-R2  | 600  | 1 Gbps  | 2  | -  n900  | 128MB  | 64KB  | 128MB  | K26RT-AC  | At least up to 2020.5, the LEDs do not function.  +| Netgear R6900 | v1 | ARM | 1000 | 1000 AC1900 128MB 64KB | 256MB | K26ARM (SDK6.37) | Supported from 2021.3 \\ \\ Note: Do not enable JFFS with firmware ** less than 2022.1 for R6900, R7000 and R6700v1 (it will delete board_data partition!)** 
-| Netgear WNDR4500  | v2  | MIPS-R2  | 600  | 1 Gbps  | 2  | -  n900  | 128MB  | 64KB  | 128MB  | K26RT-AC  |   | +| Netgear R7000 |   | ARM | 1000 | 2 | 1000 | 1 | 1 | AC1900 | 128MB | 64KB | 256MB | K26ARM (SDK6.37) NoteDo not enable JFFS with firmware ** less than 2022.1 for R6900, R7000 and R6700v1 (it will delete board_data partition!)** \\ \\ Note 2: If you have a custom CFE like Vortex 1.3.0.7, please flash back your original Netgear cfe / bootloader before updating to Freshtomato 2020.3 and newer. | 
-| Ovislink WL1600GL  |   | MIPS-R1  | 240  | 100 Mbps  | -  | -  g125  | 4MB    | 16MB  | K26  |   | +| Netgear EX7000 |   | ARM | 800 | 2 | 1000 | - | 1 | AC1900 | 16MB | 64KB | 128MB | K26ARM (SDK6.37) | Note: WIP / Switch not yet working **[[https://www.linksysinfo.org/index.php?threads/add-support-for-netgear-ex7000.78502/|See Linksys-Forum thread ]]** | 
-| Tenda AC15  | v1.0  | ARM  | 800 x2  1 Gbps  | -  | 1  ac1900  | 16MB  | 64KB  256MB  | K26ARM  (Values for model=AC15V1.0).  +| Netgear R7900 |   | ARM | 1000 | 2 | 1000 | - | 1 | AC3000 | 128MB | 64KB | 512MB (256 MB?) | K26ARM7 (SDK7) | Supported from 2022.4 | 
-| Tenda AC18  | v1.0  | ARM  | 800 x2  1 Gbps  | -  | 1  ac1900  | 128MB  | 64KB  | 256MB  | K26ARM  (Values for model=AC18V1.0).  +| Netgear R8000 |   | ARM | 1000 | 2 | 1000 | 1 | 1 | AC3200 | 128MB | 64KB | 256MB | K26ARM7 (SDK7) Note: Do not enable JFFS with firmware ** less than 2022.3 for R8000 (it can delete/damage board_data partition!)** 
-| Tenda N6  |   | MIPS-R2  | 300  | 100 Mbps  | -  | -  n600  | 8MB    | 64MB  | K26RT-N  |   | +| Netgear XR300 |   | ARM | 1000 | 2 | 1000 | - | 1 | AC1750 | 128MB | 128KB | 512MB | K26ARM (SDK6.37) | Supported from 2021.1\\ (images ending with "…-128K-512M.trx"
-| Tenda N60  |   | MIPS-R2  | 500  | 1 Gbps  | 1  | -  n600  | 8MB    | 64MB  | K26RT-N  |   | +| Netgear WNR2000 | v2 | MIPS-R2 | 300 | 1 | 100 | - | - | N300 | 4MB | 32KB | 32MB | K26 (SDK5.10) | Flash storage limited to about 3.5MB, so FT 2020.x IPv6 is the only current firmware that will fit. | 
-| Tenda N80  |   | MIPS-R2  | 500  | 1 Gbps  | 1  | -  n900  | 8MB    | 128MB  | K26RT-N  |   | +| Netgear WNR3500 | v2 | MIPS-R2 | 453 | 1 | 1000 | - | - | N300 | 3.5MB | 32KB | 32MB | K26 (SDK5.10) | Due to hard-coded jffs2 partition, flash size is reduced to only 3,473,408 bytes. As of today, FT 2020.x MiniIPV6 is 3,407,872 bytes and is the only image type that will fit. | 
-| Tenda W1800R  |   | MIPS-R2  | 600  | 1 Gbps  | 2  | -  ac1750  | 16MB    | 256MB  | K26RT-AC  |   | +| Netgear WNR3500L | v1 | MIPS-R2 | 453 | 1 | 1000 | 1 | - | N300 | 8MB | 32KB | 64MB | K26 (SDK5.10) **NOTE:** image must be smaller than ~7.3 MB (7,654,604.8 Bytes or 7,475.2 KB), see [[https://www.linksysinfo.org/index.php?threads/big-vpn-23-3-problem-on-wnr3500l.78067/#post-343373|Forum Topic/Issue]]  
-| Xiaomi Mi R1D  |   | ARM  | 1000 x2  1 Gbps  | 1  | -  ac1200  | 128MB  | 64KB  | 256MB  | K26ARM  | **IMPORTANT NOTE:** In FreshTomato, bricking the unit is caused when FULLY erasing NVRAM. Resetting values to defaults works fine.\\ With the included xVortex CFE, if you want to access the CFE you will have to power on the unit while holding reset for 10 seconds. See [[https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1139833#1139833|https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1139833#1139833]] \\   \\  Please use the images with ending "…-Custom-64K.trx"5GHz radio is enumerated/listed first (5 GHz is wl0).  +| Netgear WNR3500L | v2 | MIPS-R2 | 480 | 1 | 1000 | 1 | - | N300 | 32MB | 32KB | 128MB | K26RT-N (SDK5.110) | Please use only images with the name "freshtomato-Netgear-3500Lv2-K26USB_RT-N5x-XXXX.chk" (AIO or VPN version)
-| ZTE ZXV10 H618B  |   | MIPS-R1  | 240  | 100 Mbps  | 1  | -  g54  | 16MB    | 32MB  | K26  |   | +| Netgear WNDR3400 | v1 | MIPS-R2 | 480 | 1 | 100 | 1 | - | N600 | 8MB | 64KB | 64MB | K26RT-N (SDK5.110) |   | 
-| ZTE H218N  |   | MIPS-R2  | 500  | 1 Gbps  | 1  | -  n300  | 16MB    | 64MB  | K26RT-N  |   |+| Netgear WNDR3400 | v2/v3 | MIPS-R2 | 530 | 1 | 100 | 1 | - | N600 | 8MB | 64KB | 64MB | K26RT-N (SDK5.110) Important:Please Read <[[https://www.linksysinfo.org/index.php?threads/w-i-p-wndr3400v2-development.77559/post-337553|Flashing Instructions]]> 
 +| Netgear WNDR3700 | v3 | MIPS-R2 | 480 | 1 | 1000 | 1 | - | N600 | 8MB | 64KB | 64MB | K26RT-N (SDK5.110) | Supported from 2020.6. | 
 +| Netgear WNDR4000 |   | MIPS-R2 | 480 | 1 | 1000 | 1 |   N750 | 8MB | 64KB | 64MB | K26RT-N (SDK5.110) | Supported from 2020.6. | 
 +| Netgear WNDR4500 | v1 | MIPS-R2 | 600 | 1 | 1000 | 2 | - | N900 | 128MB | 64KB | 128MB | K26RT-AC (SDK6.30) | At least up to 2022.2, the LEDs do not function. | 
 +| Netgear WNDR4500 | v2 | MIPS-R2 | 600 | 1 | 1000 | 2 | - | N900 | 128MB | 64KB | 128MB | K26RT-AC (SDK6.30) |   | 
 +| Ovislink WL1600GL |   | MIPS-R1 | 240 | 1 | 100 | - | - | G125 | 4MB | FIXME | 16MB | K26 (SDK5.10) |   | 
 +| Tenda AC15 | v1.0 | ARM | 800 | 2 | 1000 | - | 1 | AC1900 | 16MB | 64KB | 128MB | K26ARM (SDK6.37|   
 +| Tenda AC18 | v1.0 | ARM | 800 | 2 | 1000 | - | 1 | AC1900 | 128MB | 64KB | 256MB | K26ARM (SDK6.37|   
 +| Tenda N6 |   | MIPS-R2 | 300 | 1 | 100 | - | - | N600 | 8MB | FIXME | 64MB | K26RT-N (SDK5.110) |   | 
 +| Tenda N60 |   | MIPS-R2 | 500 | 1 | 1000 | 1 | - | N600 | 8MB | 32KB | 64MB | K26RT-N (SDK5.110) |   | 
 +| Tenda N80 |   | MIPS-R2 | 500 | 1 | 1000 | 1 | - | N900 | 8MB | FIXME | 128MB | K26RT-N (SDK5.110) |   | 
 +| Tenda W1800R |   | MIPS-R2 | 600 | 1 | 1000 | 2 | - | AC1750 | 16MB | FIXME | 256MB | K26RT-AC (SDK6.30) |   | 
 +| Xiaomi Mi R1D |   | ARM | 1000 | 2 | 1000 | 1 | - | AC1200 | 128MB | 64KB | 256MB | K26ARM (SDK6.37) | **IMPORTANT :** This unit may be  bricked if you attempt to FULLY erase NVRAM. Resetting values to defaults works safelyTo access the CFE when you have the stock xVortex CFEyou must power on the unit while holding the Reset button for 10 seconds. [[https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1139833#1139833|Details]] \\   \\ Please use the images with ending "…-Custom-64K.trx"\\ \\ (wl0 is the 5 GHz radio). | 
 +| ZTE ZXV10 H618B |   | MIPS-R1 | 240 | 1 | 100 | 1 | - | G54 | 16MB | FIXME | 32MB | K26 (SDK5.10) |   | 
 +| ZTE H218N |   | MIPS-R2 | 500 | 1 | 1000 | 1 | - | N300 | 16MB | FIXME | 64MB | K26RT-N (SDK5.110) |   |
  
 </sortable> </sortable>
  
  
hardware_compatibility.1625660976.txt.gz · Last modified: 2021/07/07 13:29 by hogwild