FreshTomato Wiki

User Tools

Site Tools

Trace:
hardware_compatibility

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
hardware_compatibility [2024/03/18 07:31] – add Netgear EX7000 [WIP] m_arshardware_compatibility [2024/05/03 16:58] (current) – -correct typo ">" hogwild
Line 6: Line 6:
  
 ^ Model  ^  Rev  ^ CPU Type ^ MHz ^ CPUs ^ LAN ^ USB2 ^ USB3 ^ WiFi ^ Flash ^ NVRAM ^ RAM ^ Build (SDK) ^ Notes ^ ^ Model  ^  Rev  ^ CPU Type ^ MHz ^ CPUs ^ LAN ^ USB2 ^ USB3 ^ WiFi ^ Flash ^ NVRAM ^ RAM ^ Build (SDK) ^ Notes ^
-| Asus DSL-AC68U |   | ARM | 800 | 2 | 1000 | 1 | 1 | AC1900 | 128MB | 64KB | 256MB | K26ARM (SDK6.37) | [[https://www.linksysinfo.org/index.php?threads/ft-on-asus-dsl-ac68u-work-in-progress.75080| Supported from 2022.3 ]] \\ N**o DSL support. **This device is to be used as a router only. The WAN port is initialized to LAN port 1. |+| Asus DSL-AC68U |   | ARM | 800 | 2 | 1000 | 1 | 1 | AC1900 | 128MB | 64KB | 256MB | K26ARM (SDK6.37) | Supported from 2022.3. \\ [[https://www.linksysinfo.org/index.php?threads/ft-on-asus-dsl-ac68u-work-in-progress.75080|See this forum thread for details. ]]\\ \\ No** **DSL Support.** **This device is to be used as a router only. The WAN port is initialized to LAN port 1. |
 | Asus RT-N10P |   | MIPS-R2 | 300 | 1 | 100 | - | - | N300 | 8MB | 32KB | 32MB | K26RT-N (SDK5.110) |   | | Asus RT-N10P |   | MIPS-R2 | 300 | 1 | 100 | - | - | N300 | 8MB | 32KB | 32MB | K26RT-N (SDK5.110) |   |
 | Asus RT-N10U | A1/B1/C1 | MIPS-R2 | 300 | 1 | 100 | 1 | - | N300 | 8MB | 32KB | 32MB | K26RT-N (SDK5.110) |   | | Asus RT-N10U | A1/B1/C1 | MIPS-R2 | 300 | 1 | 100 | 1 | - | N300 | 8MB | 32KB | 32MB | K26RT-N (SDK5.110) |   |
 | Asus RT-N12 | A1 | MIPS-R2 | 300 | 1 | 100 | - | - | N300 | 4MB | 32KB | 32MB | K26 (SDK5.10) |   | | Asus RT-N12 | A1 | MIPS-R2 | 300 | 1 | 100 | - | - | N300 | 4MB | 32KB | 32MB | K26 (SDK5.10) |   |
 | Asus RT-N12 | B1/C1/D1 | MIPS-R2 | 300 | 1 | 100 | - | - | N300 | 8MB | 32KB | 32MB | K26RT-N (SDK5.110) |   | | Asus RT-N12 | B1/C1/D1 | MIPS-R2 | 300 | 1 | 100 | - | - | N300 | 8MB | 32KB | 32MB | K26RT-N (SDK5.110) |   |
-| Asus RT-N12HP | A1/B1 | MIPS-R2 | 300 | 1 | 100 | - | - | N300 | 8MB | 32KB | 32MB | K26RT-N (SDK5.110) | Support for High Power model added in 2020.4 |+| Asus RT-N12HP | A1/B1 | MIPS-R2 | 300 | 1 | 100 | - | - | N300 | 8MB | 32KB | 32MB | K26RT-N (SDK5.110) | Support for High Power model added in 2020.4. |
 | Asus RT-N12K |   | MIPS-R2 | 300 | 1 | 100 | - | - | N300 | 8MB | 32KB | 32MB | K26RT-N (SDK5.110) |   | | Asus RT-N12K |   | MIPS-R2 | 300 | 1 | 100 | - | - | N300 | 8MB | 32KB | 32MB | K26RT-N (SDK5.110) |   |
 | Asus RT-N12VP |   | MIPS-R2 | 300 | 1 | 100 | - | - | N300 | 8MB | 32KB | 32MB | K26RT-N (SDK5.110) |   | | Asus RT-N12VP |   | MIPS-R2 | 300 | 1 | 100 | - | - | N300 | 8MB | 32KB | 32MB | K26RT-N (SDK5.110) |   |
Line 21: Line 21:
 | Asus RT-N66U |   | MIPS-R2 | 600 | 1 | 1000 | 2 | - | N900 | 32MB | 64KB | 256MB | K26RT-N (SDK5.110) or K26RT-AC |   | | Asus RT-N66U |   | MIPS-R2 | 600 | 1 | 1000 | 2 | - | N900 | 32MB | 64KB | 256MB | K26RT-N (SDK5.110) or K26RT-AC |   |
 | Asus RT-N66U | C1 (B2) | ARM | 1000 | 2 | 1000 | 1 | 1 | N900 | 128MB | 64KB | 256MB | K26ARM (SDK6.37) | Supported from 2020.8. | | Asus RT-N66U | C1 (B2) | ARM | 1000 | 2 | 1000 | 1 | 1 | N900 | 128MB | 64KB | 256MB | K26ARM (SDK6.37) | Supported from 2020.8. |
-| Asus RT-AC1900U |   | ARM | 1000 | 2 | 1000 | 1 | 1 | AC1900 | 128MB | 64KB | 256MB | K26ARM (SDK6.37) | Supported from 2021.3. \\ Note: [[firmware_basics_procedures|Upgrade from AsusWRT to FreshTomato]] | +| Asus RT-AC1900U |   | ARM | 1000 | 2 | 1000 | 1 | 1 | AC1900 | 128MB | 64KB | 256MB | K26ARM (SDK6.37) | Supported from 2021.3. \\  \\ Upgrade from AsusWRT to FreshTomato\\ [[firmware_basics_procedures|See this wiki page for details.]] | 
-| Asus RT-AC56S |   | ARM | 800 | 1 | 1000 | 1 | 1 | AC1200 | 128MB | 64KB | 128MB | K26ARM (SDK6.37) | Single core (please use images ending with "…-64K-NOSMP.trx"). |+| Asus RT-AC56S |   | ARM | 800 | 1 | 1000 | 1 | 1 | AC1200 | 128MB | 64KB | 128MB | K26ARM (SDK6.37) | Single core. (Please use images ending with "…-64K-NOSMP.trx"). |
 | Asus RT-AC56U/R |   | ARM | 800 | 2 | 1000 | 1 | 1 | AC1200 | 128MB | 64KB | 256MB | K26ARM (SDK6.37) |   | | Asus RT-AC56U/R |   | ARM | 800 | 2 | 1000 | 1 | 1 | AC1200 | 128MB | 64KB | 256MB | K26ARM (SDK6.37) |   |
-| Asus RT-AC66U | A1/A2/B1 | MIPS-R2 | 600 | 1 | 1000 | 2 | - | AC1750 | 32MB | 64KB | 256MB | K26RT-AC (SDK6.30) | This model is different than the RT-AC66U_B1 below. This one is a MIPS-R2 device with two black USB 2.0 ports at the rear of the router. | +| Asus RT-AC66U | A1/A2/B1 | MIPS-R2 | 600 | 1 | 1000 | 2 | - | AC1750 | 32MB | 64KB | 256MB | K26RT-AC (SDK6.30) | This model is different than the RT-AC66U_B1 below. This is a MIPS-R2 device with two black USB 2.0 ports at the rear. | 
-| Asus RT-AC66U_B1 |   | ARM | 1000 | 2 | 1000 | 1 | 1 | AC1750 | 128MB | 64KB | 256MB | K26ARM (SDK6.37) | This model is different than the RT-AC66U above. This one is an ARM device with one blue USB 3.0 port at the front of the router and one black USB 2.0 port at the rear of the router. |+| Asus RT-AC66U_B1 |   | ARM | 1000 | 2 | 1000 | 1 | 1 | AC1750 | 128MB | 64KB | 256MB | K26ARM (SDK6.37) | This model is different than the RT-AC66U above. This is an ARM device with one blue USB 3.0 port at the front of and one black USB 2.0 port at the rear. |
 | Asus RT-AC67U |   | ARM | 1000 | 2 | 1000 | 1 | 1 | AC1900 | 128MB | 64KB | 256MB | K26ARM (SDK6.37) | Supported from 2020.8. | | Asus RT-AC67U |   | ARM | 1000 | 2 | 1000 | 1 | 1 | AC1900 | 128MB | 64KB | 256MB | K26ARM (SDK6.37) | Supported from 2020.8. |
 | Asus RT-AC68U/R/P | A1/A2/B1 | ARM | 800 | 2 | 1000 | 1 | 1 | AC1900 | 128MB | 64KB | 256MB | K26ARM (SDK6.37) |   | | Asus RT-AC68U/R/P | A1/A2/B1 | ARM | 800 | 2 | 1000 | 1 | 1 | AC1900 | 128MB | 64KB | 256MB | K26ARM (SDK6.37) |   |
Line 31: Line 31:
 | Asus RT-AC68U | B2 | ARM | 1400 | 2 | 1000 | 1 | 1 | AC1900 | 128MB | 64KB | 256MB | K26ARM (SDK6.37) |   | | Asus RT-AC68U | B2 | ARM | 1400 | 2 | 1000 | 1 | 1 | AC1900 | 128MB | 64KB | 256MB | K26ARM (SDK6.37) |   |
 | Asus RT-AC1900P |   | ARM | 1400 | 2 | 1000 | 1 | 1 | AC1900 | 128MB | 64KB | 256MB | K26ARM (SDK6.37) |   | | Asus RT-AC1900P |   | ARM | 1400 | 2 | 1000 | 1 | 1 | AC1900 | 128MB | 64KB | 256MB | K26ARM (SDK6.37) |   |
-| Asus RT-AC3200 |   | ARM | 1000 | 2 | 1000 | 1 | 1 | AC3200 | 128MB | 128KB | 256MB | K26ARM7 (SDK7) | Please check NVRAM first (64KB default at release or 128KB after Asus update). To get 128KB version FreshTomato flashed, you must first have Asus stock firmware V3.0.0.4.382.51374 installed. | +| Asus RT-AC3200 |   | ARM | 1000 | 2 | 1000 | 1 | 1 | AC3200 | 128MB | 128KB | 256MB | K26ARM7 (SDK7) | Please check NVRAM first (64KB default at release or 128KB after Asus update). To get 128KB FreshTomato version flashed, you must first have Asus stock firmware V3.0.0.4.382.51374 installed. | 
-| Asus RT-AC3100 |   | ARM | 1400 | 2 | 1000 | 1 | 1 | AC3100 | 128MB | 128KB | 512MB | K26ARM714 (SDK714) | Supported from 2022.6 \\ [[https://www.linksysinfo.org/index.php?threads/asus-rt-ac3100-preview-for-ft.77620/|for more info please see]] | +| Asus RT-AC3100 |   | ARM | 1400 | 2 | 1000 | 1 | 1 | AC3100 | 128MB | 128KB | 512MB | K26ARM714 (SDK714) | Supported from 2022.6 \\ [[https://www.linksysinfo.org/index.php?threads/asus-rt-ac3100-preview-for-ft.77620/|See this forum thread for details.]] | 
-| Asus RT-AC88U |   | ARM | 1400 | 2 | 1000 | 1 | 1 | AC3100 | 128MB | 128KB | 512MB | K26ARM714 (SDK714) | Supported from 2022.6 \\ [[https://www.linksysinfo.org/index.php?threads/asus-rt-ac88u-preview-for-ft.77661/|for more info please see]] \\ NOTE: This image will only support LAN Port 1 - 4 + WAN Port. The external RTL8365MB switch (LAN Port 5 - 8) will not be used/supported currently | +| Asus RT-AC88U |   | ARM | 1400 | 2 | 1000 | 1 | 1 | AC3100 | 128MB | 128KB | 512MB | K26ARM714 (SDK714) | Supported from 2022.6 \\ [[https://www.linksysinfo.org/index.php?threads/asus-rt-ac88u-preview-for-ft.77661/|See this forum thread for details.]] \\ \\ This image supports only LAN ports 1 - 4 + WAN port. Currently, the external RTL8365MB switch (LAN Ports 5 - 8) will not be used/supported. | 
-| Asus RT-AC5300 |   | ARM | 1400 | 2 | 1000 | 1 | 1 | AC5300 | 128MB | 128KB | 512MB | K26ARM714 (SDK714) | Supported from 2022.6 \\ [[https://www.linksysinfo.org/index.php?threads/asus-rt-ac5300-preview-for-ft.77592/|for more info please see]] (NOT Asus GT-AC5300) | +| Asus RT-AC5300 |   | ARM | 1400 | 2 | 1000 | 1 | 1 | AC5300 | 128MB | 128KB | 512MB | K26ARM714 (SDK714) | Supported from 2022.6 \\ [[https://www.linksysinfo.org/index.php?threads/asus-rt-ac5300-preview-for-ft.77592/|See this forum thread for details.]] \\ (This is not the Asus GT-AC5300). | 
-| Asus TUF-AX3000_V2 |   | ARM | 1700 | 4 | 1000 | - | 1 | AX3000 | 256MB | 128KB | 512MB | K419ARM (HND 5.04AX) | 2.5G WAN (Internet) Port \\ Supported from 2023.3 and based on AsusWRT GPL 388.22525 \\ NOTE: AsusWRT GUI and Features + some FreshTomato Features (Status September 2023) |+| Asus TUF-AX3000_V2 |   | ARM | 1700 | 4 | 1000 | - | 1 | AX3000 | 256MB | 128KB | 512MB | K419ARM (HND 5.04AX) | Supported from 2023.3. \\ \\ 2.5Gb WAN (Internet) Port. \\  \\ Based on AsusWRT GPL 388.22525. \\ Offers AsusWRT GUI/Features and some FreshTomato Features (as of Sept, 2023) |
 | Asus WL-330gE |   | MIPS-R1 | 240 | 1 | 100 | - | - | G54 | 4MB | FIXME | 16MB | K26 (SDK5.10) |   | | Asus WL-330gE |   | MIPS-R1 | 240 | 1 | 100 | - | - | G54 | 4MB | FIXME | 16MB | K26 (SDK5.10) |   |
 | Asus WL-500GP | v1/v2 | MIPS-R1 | 240 | 1 | 100 | 2 | - | G54 | 8MB | FIXME | 32MB | K26 (SDK5.10) |   | | Asus WL-500GP | v1/v2 | MIPS-R1 | 240 | 1 | 100 | 2 | - | G54 | 8MB | FIXME | 32MB | K26 (SDK5.10) |   |
 | Asus WL-500W |   | MIPS-R1 | 264 | 1 | 100 | 2 | - | G54 | 8MB | FIXME | 32MB | K26 (SDK5.10) |   | | Asus WL-500W |   | MIPS-R1 | 264 | 1 | 100 | 2 | - | G54 | 8MB | FIXME | 32MB | K26 (SDK5.10) |   |
 | Asus WL-520GU |   | MIPS-R1 | 240 | 1 | 100 | 1 | - | G54 | 4MB | 32KB | 16MB | K26 (SDK5.10) |   | | Asus WL-520GU |   | MIPS-R1 | 240 | 1 | 100 | 1 | - | G54 | 4MB | 32KB | 16MB | K26 (SDK5.10) |   |
-| Belkin F5D8235 | v3 | MIPS-R2 | 533 | 1 | 1000 | 1 | - | N300 | 8MB | 64KB | 64MB | K26 (SDK5.10) or K26RT-N (SDK5.110) | Only v3 is Broadcom - based  |+| Belkin F5D8235 | v3 | MIPS-R2 | 533 | 1 | 1000 | 1 | - | N300 | 8MB | 64KB | 64MB | K26 (SDK5.10) or K26RT-N (SDK5.110) | Only v3 is Broadcom-based.  |
 | Belkin F7D3301/7301 | v1 | MIPS-R2 | 453 | 1 | 100 | 2 | - | N300 | 8MB | 32KB | 64MB | K26 (SDK5.10) |   | | Belkin F7D3301/7301 | v1 | MIPS-R2 | 453 | 1 | 100 | 2 | - | N300 | 8MB | 32KB | 64MB | K26 (SDK5.10) |   |
 | Belkin F7D3302/7302 | v1 | MIPS-R2 | 453 | 1 | 100 | 1 | - | N300 | 8MB | 32KB | 64MB | K26 (SDK5.10) | Belkin F7D3302/7302. | | Belkin F7D3302/7302 | v1 | MIPS-R2 | 453 | 1 | 100 | 1 | - | N300 | 8MB | 32KB | 64MB | K26 (SDK5.10) | Belkin F7D3302/7302. |
 | Belkin F7D4302/F7D8302 | v1 | MIPS-R2 | 453 | 1 | 100 | 1 | - | A/N600 | 8MB | 32KB | 64MB | K26 (SDK5.10) or K26RT-N (SDK5.110) | Belkin Play Wireless | | Belkin F7D4302/F7D8302 | v1 | MIPS-R2 | 453 | 1 | 100 | 1 | - | A/N600 | 8MB | 32KB | 64MB | K26 (SDK5.10) or K26RT-N (SDK5.110) | Belkin Play Wireless |
-| Belkin F9K1102 | v1/v3 | MIPS-R2 | 533 | 1 | 100 | 1 | - | N600 | 8MB | 32KB | 64MB | K26RT-N (SDK5.110) | [[https://www.linksysinfo.org/index.php?threads/belkin-f9k1102-tomato-bring-up.70850/post-327032|Support Information]] | +| Belkin F9K1102 | v1/v3 | MIPS-R2 | 533 | 1 | 100 | 1 | - | N600 | 8MB | 32KB | 64MB | K26RT-N (SDK5.110) | [[https://www.linksysinfo.org/index.php?threads/belkin-f9k1102-tomato-bring-up.70850/post-327032|See this forum thread for details.]] | 
-| Belkin F9K1113 | v2 | ARM | 800 | 1 | 1000 | 1 | 1 | AC1200 | 16MB | 64KB | 128MB | K26ARM (SDK6.37) | Supported from 2021.1 \\ Additional cooling may be required. This router can get hot due to its design. [[https://www.linksysinfo.org/index.php?threads/belkin-f9k1113v2-firmware-testing.76214/|Thread]] \\ (wl0 is 5 GHz radio). |+| Belkin F9K1113 | v2 | ARM | 800 | 1 | 1000 | 1 | 1 | AC1200 | 16MB | 64KB | 128MB | K26ARM (SDK6.37) | Supported from 2021.1. \\ \\ Additional cooling may be needed. This router can get hot due to its design. [[https://www.linksysinfo.org/index.php?threads/belkin-f9k1113v2-firmware-testing.76214/|See this forum thread for details.]] \\ \\ (wl0 is the 5 GHz radio). |
 | Buffalo WHR-G54S |   | MIPS-R1 | 200 | 1 | 100 | - | - | G54 | 4MB | 32KB | 16MB | K26 (SDK5.10) |   | | Buffalo WHR-G54S |   | MIPS-R1 | 200 | 1 | 100 | - | - | G54 | 4MB | 32KB | 16MB | K26 (SDK5.10) |   |
 | Buffalo WHR-G125 |   | MIPS-R1 | 240 | 1 | 100 | - | - | G108 | 4MB | 32KB | 16MB | K26 (SDK5.10) |   | | Buffalo WHR-G125 |   | MIPS-R1 | 240 | 1 | 100 | - | - | G108 | 4MB | 32KB | 16MB | K26 (SDK5.10) |   |
 | Buffalo WHR-HP-G54 |   | MIPS-R1 | 200 | 1 | 100 | - | - | G54 | 4MB | 32KB | 16MB | K26 (SDK5.10) |   | | Buffalo WHR-HP-G54 |   | MIPS-R1 | 200 | 1 | 100 | - | - | G54 | 4MB | 32KB | 16MB | K26 (SDK5.10) |   |
 | Buffalo WZR-D1800H |   | MIPS-R2 | 600 | 1 | 1000 | 1 | - | AC1750 | 128MB | 64KB | 128MB | K26RT-N (SDK5.110) |   | | Buffalo WZR-D1800H |   | MIPS-R2 | 600 | 1 | 1000 | 1 | - | AC1750 | 128MB | 64KB | 128MB | K26RT-N (SDK5.110) |   |
-| Buffalo WZR-1750DHP |   | ARM | 800 | 2 | 1000 | 1 | 1 | AC1750 | 128MB | 64KB | 512MB | K26ARM (SDK6.37) | [[https://www.linksysinfo.org/index.php?threads/buffalo-wzr-1750dhp-bricked.74962/#post-333522|please read first]] |+| Buffalo WZR-1750DHP |   | ARM | 800 | 2 | 1000 | 1 | 1 | AC1750 | 128MB | 64KB | 512MB | K26ARM (SDK6.37) | [[https://www.linksysinfo.org/index.php?threads/buffalo-wzr-1750dhp-bricked.74962/#post-333522|See this forum thread for details.]] |
 | CD-R King CW-5358U |   | MIPS-R2 | FIXME | FIXME | 100 | 1 | - | N300 | 8MB | FIXME | 32MB | FIXME |   | | CD-R King CW-5358U |   | MIPS-R2 | FIXME | FIXME | 100 | 1 | - | N300 | 8MB | FIXME | 32MB | FIXME |   |
 | Cisco M10 v2 |   | MIPS-R2  | 300 | 1 | 100 | - | - | N300 | 4MB | 32KB | 32MB | K26RT-N (SDK5.110) |   | | Cisco M10 v2 |   | MIPS-R2  | 300 | 1 | 100 | - | - | N300 | 4MB | 32KB | 32MB | K26RT-N (SDK5.110) |   |
 | D-Link DIR-320 |   | MIPS-R1 | 240 | 1 | 100 | 1 | - | N150 | 4MB | FIXME | 32MB | K26 (SDK5.10) |   | | D-Link DIR-320 |   | MIPS-R1 | 240 | 1 | 100 | 1 | - | N150 | 4MB | FIXME | 32MB | K26 (SDK5.10) |   |
 | D-Link DIR-620 | C1 | MIPS-R2 | 530 | 1 | 100 | 1 | - | N300 | 8MB | FIXME | 64MB | K26RT-N (SDK5.110) |   | | D-Link DIR-620 | C1 | MIPS-R2 | 530 | 1 | 100 | 1 | - | N300 | 8MB | FIXME | 64MB | K26RT-N (SDK5.110) |   |
-| D-Link DIR-865L |   | MIPS-R2 | 600 | 1 | 1000 | 1 | - | AC1750 | 16MB | 32KB | 256MB | K26RT-AC (SDK6.30) | Supported from 2020.8. \\ NVRAM is limited to 32K. Use special build. |+| D-Link DIR-865L |   | MIPS-R2 | 600 | 1 | 1000 | 1 | - | AC1750 | 16MB | 32KB | 256MB | K26RT-AC (SDK6.30) | Supported from 2020.8. \\ \\ NVRAM is limited to 32K. Use special build. |
 | D-Link DIR-868L | A1/B1/C1 | ARM | 800 | 2 | 1000 | - | 1 | AC1750 | 128MB | 32KB | 128MB | K26ARM (SDK6.37) | NVRAM is limited to 32K. Use special build. | | D-Link DIR-868L | A1/B1/C1 | ARM | 800 | 2 | 1000 | - | 1 | AC1750 | 128MB | 32KB | 128MB | K26ARM (SDK6.37) | NVRAM is limited to 32K. Use special build. |
 | Fiboom HG320 |   | MIPS-R2 | 533 | 1 | 100 | 1 | - | FIXME | 16MB | 32KB | 256MB | K26RT-N (SDK5.110) |   | | Fiboom HG320 |   | MIPS-R2 | 533 | 1 | 100 | 1 | - | FIXME | 16MB | 32KB | 256MB | K26RT-N (SDK5.110) |   |
Line 72: Line 72:
 | Linksys E3200 |   | MIPS-R2 | 500 | 1 | 1000 | 1 | - | N600 | 16MB | 64KB | 64MB | K26RT-N (SDK5.110) | 60K NVRAM. | | Linksys E3200 |   | MIPS-R2 | 500 | 1 | 1000 | 1 | - | N600 | 16MB | 64KB | 64MB | K26RT-N (SDK5.110) | 60K NVRAM. |
 | Linksys E4200 | v1 | MIPS-R2 | 480 | 1 | 1000 | 1 | - | N750 | 16MB | 60KB | 64MB | K26RT-N (SDK5.110) | v2 is not supported, due to its Marvell chipset. | | Linksys E4200 | v1 | MIPS-R2 | 480 | 1 | 1000 | 1 | - | N750 | 16MB | 60KB | 64MB | K26RT-N (SDK5.110) | v2 is not supported, due to its Marvell chipset. |
-| Linksys EA6200 | v1 | ARM | 800 | 1 | 1000 | - | 1 | AC900 | 128MB | 64KB | 128MB | K26ARM (SDK6.37) | CFE 32KB NVRAM Bug. \\ [[https://www.linksysinfo.org/index.php?threads/linksys-ea6200-ea6350v1-freshtomato-arm-discussion.74916|Please read the following before flashing]] \\ Single core (Use images ending with "…-64K-NOSMP.trx") \\ (wl0 is 5 GHz radio). | +| Linksys EA6200 | v1 | ARM | 800 | 1 | 1000 | - | 1 | AC900 | 128MB | 64KB | 128MB | K26ARM (SDK6.37) | CFE 32KB NVRAM Bug. \\ [[https://www.linksysinfo.org/index.php?threads/linksys-ea6200-ea6350v1-freshtomato-arm-discussion.74916|Read this before flashing.]] \\ \\ Single core (Use images ending with "…-64K-NOSMP.trx") \\ (wl0 is 5 GHz radio). | 
-| Linksys EA6300 | v1 | ARM | 800 | 2 | 1000 | - | 1 | AC1200 | 128MB | 64KB | 128MB | K26ARM (SDK6.37) | CFE 32KB NVRAM Bug. \\ [[https://www.linksysinfo.org/index.php?threads/guide-flash-linksys-ea6300v1-ea6400-ea6500v2-ea6700-ea6900v1-0-1-1-with-tomato.73877/|Please read the following before flashing]] | +| Linksys EA6300 | v1 | ARM | 800 | 2 | 1000 | - | 1 | AC1200 | 128MB | 64KB | 128MB | K26ARM (SDK6.37) | CFE 32KB NVRAM Bug. \\ [[https://www.linksysinfo.org/index.php?threads/guide-flash-linksys-ea6300v1-ea6400-ea6500v2-ea6700-ea6900v1-0-1-1-with-tomato.73877/|Read this before flashing.]] | 
-| Linksys EA6350 | v1 | ARM | 800 | 1 | 1000 | - | 1 | AC1200 | 128MB | 64KB | 128MB | K26ARM (SDK6.37) | CFE 32KB NVRAM Bug. \\ [[https://www.linksysinfo.org/index.php?threads/linksys-ea6200-ea6350v1-freshtomato-arm-discussion.74916|Please read the following thread before flashing]] \\ Single core (please use the images ending with: "…-64K-NOSMP.trx") | +| Linksys EA6350 | v1 | ARM | 800 | 1 | 1000 | - | 1 | AC1200 | 128MB | 64KB | 128MB | K26ARM (SDK6.37) | CFE 32KB NVRAM Bug. \\ [[https://www.linksysinfo.org/index.php?threads/linksys-ea6200-ea6350v1-freshtomato-arm-discussion.74916|Read this before flashing.]] \\ \\ Single core (please use images ending with: "…-64K-NOSMP.trx") | 
-| Linksys EA6350 | v2 | ARM | 800 | 2 | 1000 | - | 1 | AC1200 | 128MB | 64KB | 128MB | K26ARM (SDK6.37) | Supported from 2022.1**.** More info [[https://www.linksysinfo.org/index.php?threads/full-support-linksys-ea6350v2-announcement.77202|here]] | +| Linksys EA6350 | v2 | ARM | 800 | 2 | 1000 | - | 1 | AC1200 | 128MB | 64KB | 128MB | K26ARM (SDK6.37) | Supported from 2022.1**. **\\  [[https://www.linksysinfo.org/index.php?threads/full-support-linksys-ea6350v2-announcement.77202|See this forum thread for details.]] | 
-| Linksys EA6400 |   | ARM | 800 | 2 | 1000 | - | 1 | AC1200 | 128MB | 64KB | 128MB | K26ARM (SDK6.37) | CFE 32KB NVRAM Bug. \\ [[https://www.linksysinfo.org/index.php?threads/guide-flash-linksys-ea6300v1-ea6400-ea6500v2-ea6700-ea6900v1-0-1-1-with-tomato.73877/|Please read the following thread before flashing]] | +| Linksys EA6400 |   | ARM | 800 | 2 | 1000 | - | 1 | AC1200 | 128MB | 64KB | 128MB | K26ARM (SDK6.37) | CFE 32KB NVRAM Bug. \\ [[https://www.linksysinfo.org/index.php?threads/guide-flash-linksys-ea6300v1-ea6400-ea6500v2-ea6700-ea6900v1-0-1-1-with-tomato.73877/|Read this before flashing.]] | 
-| Linksys EA6500 | v2 | ARM | 800 | 2 | 1000 | 1 | 1 | AC1750 | 128MB | 64KB | 256MB | K26ARM (SDK6.37) | CFE 32KB NVRAM Bug. \\ [[https://www.linksysinfo.org/index.php?threads/guide-flash-linksys-ea6300v1-ea6400-ea6500v2-ea6700-ea6900v1-0-1-1-with-tomato.73877|Please read the following thread before flashing]] | +| Linksys EA6500 | v2 | ARM | 800 | 2 | 1000 | 1 | 1 | AC1750 | 128MB | 64KB | 256MB | K26ARM (SDK6.37) | CFE 32KB NVRAM Bug. \\ [[https://www.linksysinfo.org/index.php?threads/guide-flash-linksys-ea6300v1-ea6400-ea6500v2-ea6700-ea6900v1-0-1-1-with-tomato.73877|Read this before flashing.]] | 
-| Linksys EA6700 |   | ARM | 800 | 2 | 1000 | 1 | 1 | AC1750 | 128MB | 64KB | 256MB | K26ARM (SDK6.37) | CFE 32KB NVRAM Bug. \\ [[https://www.linksysinfo.org/index.php?threads/guide-flash-linksys-ea6300v1-ea6400-ea6500v2-ea6700-ea6900v1-0-1-1-with-tomato.73877|Please read the following thread before flashing]] | +| Linksys EA6700 |   | ARM | 800 | 2 | 1000 | 1 | 1 | AC1750 | 128MB | 64KB | 256MB | K26ARM (SDK6.37) | CFE 32KB NVRAM Bug. \\ [[https://www.linksysinfo.org/index.php?threads/guide-flash-linksys-ea6300v1-ea6400-ea6500v2-ea6700-ea6900v1-0-1-1-with-tomato.73877|Read this before flashing.]] | 
-| Linksys EA6900 | v1/v1.1 | ARM | 800 | 2 | 1000 | 1 | 1 | AC1900 | 128MB | 64KB | 256MB | K26ARM (SDK6.37) | CFE 32KB NVRAM Bug. \\ [[https://www.linksysinfo.org/index.php?threads/guide-flash-linksys-ea6300v1-ea6400-ea6500v2-ea6700-ea6900v1-0-1-1-with-tomato.73877/|Please read the following thread before flashing]] |+| Linksys EA6900 | v1/v1.1 | ARM | 800 | 2 | 1000 | 1 | 1 | AC1900 | 128MB | 64KB | 256MB | K26ARM (SDK6.37) | CFE 32KB NVRAM Bug. \\ [[https://www.linksysinfo.org/index.php?threads/guide-flash-linksys-ea6300v1-ea6400-ea6500v2-ea6700-ea6900v1-0-1-1-with-tomato.73877/|Read this before flashing.]] |
 | Linksys WRT54GL | v1/v1.1 | MIPS-R1 | 200 | 1 | 100 | - | - | G54 | 4MB | 32KB | 16MB | K26 (SDK5.10) |   | | Linksys WRT54GL | v1/v1.1 | MIPS-R1 | 200 | 1 | 100 | - | - | G54 | 4MB | 32KB | 16MB | K26 (SDK5.10) |   |
 | Linksys WRT54G/GS | v2/v3/v4 | MIPS-R1 | 240 | 1 | 100 | - | - | G54 | 4-8MB | 32KB | 32-64MB | K26 (SDK5.10) |   | | Linksys WRT54G/GS | v2/v3/v4 | MIPS-R1 | 240 | 1 | 100 | - | - | G54 | 4-8MB | 32KB | 32-64MB | K26 (SDK5.10) |   |
Line 89: Line 89:
 | Linksys WRT320N |   | MIPS-R2 | 354 | 1 | 1000 | - | - | N300 | 8MB | 32KB | 32MB | K26 (SDK5.10) |   | | Linksys WRT320N |   | MIPS-R2 | 354 | 1 | 1000 | - | - | N300 | 8MB | 32KB | 32MB | K26 (SDK5.10) |   |
 | Linksys WRT610N | v2 | MIPS-R2 | 480 | 1 | 1000 | 1 | - | N300 | 8MB | 32KB | 64MB | K26 (SDK5.10) |   | | Linksys WRT610N | v2 | MIPS-R2 | 480 | 1 | 1000 | 1 | - | N300 | 8MB | 32KB | 64MB | K26 (SDK5.10) |   |
-| Netgear AC1450 |   | ARM | 800 | 2 | 1000 | - | 1 | AC1750 | 128MB | 64KB | 256MB | K26ARM (SDK6.37) | Supported from 2022.3 \\ [[https://www.linksysinfo.org/index.php?threads/netgear-ac1450.77269/|Additional help here]] | +| Netgear AC1450 |   | ARM | 800 | 2 | 1000 | - | 1 | AC1750 | 128MB | 64KB | 256MB | K26ARM (SDK6.37) | Supported from 2022.3 .\\ [[https://www.linksysinfo.org/index.php?threads/netgear-ac1450.77269/|See this forum thread for details.]] | 
-| Netgear R6200 | v2 | ARM | 800 | 1 | 1000 | - | 1 | AC1200 | 128MB | 64KB | 256MB | K26ARM (SDK6.37) | Supported from 2023.5 \\ Flash information can be found here \\ [[https://www.linksysinfo.org/index.php?threads/added-support-coming-soon-for-the-netgear-r6200v2-router.78246/|Support Information]] |+| Netgear R6200 | v2 | ARM | 800 | 1 | 1000 | - | 1 | AC1200 | 128MB | 64KB | 256MB | K26ARM (SDK6.37) | Supported from 2023.5 \\ [[https://www.linksysinfo.org/index.php?threads/added-support-coming-soon-for-the-netgear-r6200v2-router.78246/|See this forum thread for details.]] |
 | Netgear R6250 |   | ARM | 800 | 2 | 1000 | - | 1 | AC1600 | 128MB | 64KB | 256MB | K26ARM (SDK6.37) |   | | Netgear R6250 |   | ARM | 800 | 2 | 1000 | - | 1 | AC1600 | 128MB | 64KB | 256MB | K26ARM (SDK6.37) |   |
 | Netgear R6300 | v1 | MIPS-R2 | 600 | 1 | 1000 | 2 | 1 | AC1750 | 128MB | 64KB | 128MB | K26RT-AC (SDK6.30) |   | | Netgear R6300 | v1 | MIPS-R2 | 600 | 1 | 1000 | 2 | 1 | AC1750 | 128MB | 64KB | 128MB | K26RT-AC (SDK6.30) |   |
Line 96: Line 96:
 | Netgear R6400 | v1 | ARM | 800 | 2 | 1000 | 1 | 1 | AC1750 | 128MB | 128KB | 256MB | K26ARM (SDK6.37) |   | | Netgear R6400 | v1 | ARM | 800 | 2 | 1000 | 1 | 1 | AC1750 | 128MB | 128KB | 256MB | K26ARM (SDK6.37) |   |
 | Netgear R6400 | v2 | ARM | 1000 | 2 | 1000 | 1 | 1 | AC1750 | 128MB | 128KB | 256MB | K26ARM (SDK6.37) |   | | Netgear R6400 | v2 | ARM | 1000 | 2 | 1000 | 1 | 1 | AC1750 | 128MB | 128KB | 256MB | K26ARM (SDK6.37) |   |
-| Netgear R6700 | v1 | ARM | 1000 | 2 | 1000 | - | 1 | AC1750 | 128MB | 64KB | 256MB | K26ARM (SDK6.37) | Supported from 2020.8 \\ \\ Note: Do not enable JFFS with firmware ** less than 2022.1 for R6900, R7000 and R6700v1 (it will delete board_data partition!)** | +| Netgear R6700 | v1 | ARM | 1000 | 2 | 1000 | - | 1 | AC1750 | 128MB | 64KB | 256MB | K26ARM (SDK6.37) | Supported from 2020.8. \\ \\ Do not enable JFFS with firmware ** **less than 2022.1 for R6900, R7000 and R6700v1. Doing so will delete board_data partition! | 
-| Netgear R6700 | v3 | ARM | 1000 | 2 | 1000 | 1 | 1 | AC1750 | 128MB | 128KB | 256MB (512MB) | K26ARM (SDK6.37) | Note: Some router can have 512 MB RAM. Images for both variants are provided:\\ "...-AIO-128K-512M.trx" (support for 512 MB RAM)\\ "...-AIO-128K.trx" (support up to 256 MB RAM)\\ Note 2: If not sure or unknown, just use the 512 MB RAM version, will work always | +| Netgear R6700 | v3 | ARM | 1000 | 2 | 1000 | 1 | 1 | AC1750 | 128MB | 128KB | 256MB (512MB) | K26ARM (SDK6.37) | Some of these routers have 512 MB RAM. Images for both variants are provided:\\ "...-AIO-128K-512M.trx" (support for 512 MB RAM)\\ "...-AIO-128K.trx" (support up to 256 MB RAM) \\ \\ If RAM unknown or unsure, use the 512 MB RAM version. It will always work. | 
-| Netgear R6900 | v1 | ARM | 1000 | 2 | 1000 | - | 1 | AC1900 | 128MB | 64KB | 256MB | K26ARM (SDK6.37) | Supported from 2021.3 \\ \\ Note: Do not enable JFFS with firmware ** less than 2022.1 for R6900, R7000 and R6700v1 (it will delete board_data partition!)** | +| Netgear R6900 | v1 | ARM | 1000 | 2 | 1000 | - | 1 | AC1900 | 128MB | 64KB | 256MB | K26ARM (SDK6.37) | Supported from 2021.3 \\ \\ Do not enable JFFS with firmware before 2022.1 for R6900, R7000 and R6700v1. Doing so will delete board_data partition! | 
-| Netgear R7000 |   | ARM | 1000 | 2 | 1000 | 1 | 1 | AC1900 | 128MB | 64KB | 256MB | K26ARM (SDK6.37) | Note: Do not enable JFFS with firmware ** less than 2022.1 for R6900, R7000 and R6700v1 (it will delete board_data partition!)** \\ \\ Note 2: If you have a custom CFE like Vortex 1.3.0.7, please flash back your original Netgear cfe / bootloader before updating to Freshtomato 2020.3 and newer. | +| Netgear R7000 |   | ARM | 1000 | 2 | 1000 | 1 | 1 | AC1900 | 128MB | 64KB | 256MB | K26ARM (SDK6.37) | Do not enable JFFS with firmware before** **2022.1 on R6900, R7000 and R6700v1. Doing so will delete board_data partition! \\ \\ If you have a custom CFE, like Vortex 1.3.0.7, flash back your original Netgear cfe / bootloader before updating to 2020.3 and newer. \\ [[https://www.linksysinfo.org/index.php?threads/add-support-for-netgear-ex7000.78502/|See this forum thread for details. ]] | 
-| Netgear EX7000 |   | ARM | 800 | 2 | 1000 | - | 1 | AC1900 | 128MB | 64KB | 128MB | K26ARM (SDK6.37) | Note: WIP / Switch no yet working ** [[https://www.linksysinfo.org/index.php?threads/add-support-for-netgear-ex7000.78502/|See Linksys-Forum thread ]]** | +| Netgear EX7000 |   | ARM | 800 | 2 | 1000 | - | 1 | AC1900 | 16MB | 64KB | 128MB | K26ARM (SDK6.37) | Work in progress. Switch is not yet working. | 
-| Netgear R7900 |   | ARM | 1000 | 2 | 1000 | - | 1 | AC3000 | 128MB | 64KB | 512MB (256 MB?) | K26ARM7 (SDK7) | Supported from 2022.4 | +| Netgear R7900 |   | ARM | 1000 | 2 | 1000 | - | 1 | AC3000 | 128MB | 64KB | 512MB (256 MB?) | K26ARM7 (SDK7) | Supported from 2022.4. | 
-| Netgear R8000 |   | ARM | 1000 | 2 | 1000 | 1 | 1 | AC3200 | 128MB | 64KB | 256MB | K26ARM7 (SDK7) | Note: Do not enable JFFS with firmware ** less than 2022.3 for R8000 (it can delete/damage board_data partition!)** | +| Netgear R8000 |   | ARM | 1000 | 2 | 1000 | 1 | 1 | AC3200 | 128MB | 64KB | 256MB | K26ARM7 (SDK7) | Do not enable JFFS with firmware before 2022.3 for R8000. Doing so can delete/damage board_data partition! | 
-| Netgear XR300 |   | ARM | 1000 | 2 | 1000 | - | 1 | AC1750 | 128MB | 128KB | 512MB | K26ARM (SDK6.37) | Supported from 2021.1\\ (images ending with "…-128K-512M.trx") | +| Netgear XR300 |   | ARM | 1000 | 2 | 1000 | - | 1 | AC1750 | 128MB | 128KB | 512MB | K26ARM (SDK6.37) | Supported from 2021.1. \\ \\ (images ending with "…-128K-512M.trx") | 
-| Netgear WNR2000 | v2 | MIPS-R2 | 300 | 1 | 100 | - | - | N300 | 4MB | 32KB | 32MB | K26 (SDK5.10) | Flash storage limited to about 3.5MB, so FT 2020.x IPv6 is the only current firmware that will fit. | +| Netgear WNR2000 | v2 | MIPS-R2 | 300 | 1 | 100 | - | - | N300 | 4MB | 32KB | 32MB | K26 (SDK5.10) | Flash storage limited to about 3.5MB, so 2020.x IPv6 image is the only current firmware that will fit. | 
-| Netgear WNR3500 | v2 | MIPS-R2 | 453 | 1 | 1000 | - | - | N300 | 3.5MB | 32KB | 32MB | K26 (SDK5.10) | Due to hard-coded jffs2 partition, flash size is reduced to only 3,473,408 bytes. As of today, FT 2020.x MiniIPV6 is 3,407,872 bytes and is the only image type that will fit. | +| Netgear WNR3500 | v2 | MIPS-R2 | 453 | 1 | 1000 | - | - | N300 | 3.5MB | 32KB | 32MB | K26 (SDK5.10) | Due to hard-coded jffs2 partition, flash size is reduced to only 3,473,408 bytes. As of today, FT 2020.x MiniIPV6 is 3,407,872 bytes and is the only image type that fits. | 
-| Netgear WNR3500L | v1 | MIPS-R2 | 453 | 1 | 1000 | 1 | - | N300 | 8MB | 32KB | 64MB | K26 (SDK5.10) | **NOTE:** image must be smaller than ~7.3 MB (7,654,604.8 Bytes or 7,475.2 KB), see [[https://www.linksysinfo.org/index.php?threads/big-vpn-23-3-problem-on-wnr3500l.78067/#post-343373|Forum Topic/Issue]]  |+| Netgear WNR3500L | v1 | MIPS-R2 | 453 | 1 | 1000 | 1 | - | N300 | 8MB | 32KB | 64MB | K26 (SDK5.10) | Image must be smaller than ~7.3 MB (7,654,604.8 Bytes or 7,475.2 KB) \\ [[https://www.linksysinfo.org/index.php?threads/big-vpn-23-3-problem-on-wnr3500l.78067/#post-343373|See this forum thread for details.]]  |
 | Netgear WNR3500L | v2 | MIPS-R2 | 480 | 1 | 1000 | 1 | - | N300 | 32MB | 32KB | 128MB | K26RT-N (SDK5.110) | Please use only images with the name "freshtomato-Netgear-3500Lv2-K26USB_RT-N5x-XXXX.chk" (AIO or VPN version). | | Netgear WNR3500L | v2 | MIPS-R2 | 480 | 1 | 1000 | 1 | - | N300 | 32MB | 32KB | 128MB | K26RT-N (SDK5.110) | Please use only images with the name "freshtomato-Netgear-3500Lv2-K26USB_RT-N5x-XXXX.chk" (AIO or VPN version). |
 | Netgear WNDR3400 | v1 | MIPS-R2 | 480 | 1 | 100 | 1 | - | N600 | 8MB | 64KB | 64MB | K26RT-N (SDK5.110) |   | | Netgear WNDR3400 | v1 | MIPS-R2 | 480 | 1 | 100 | 1 | - | N600 | 8MB | 64KB | 64MB | K26RT-N (SDK5.110) |   |
-| Netgear WNDR3400 | v2/v3 | MIPS-R2 | 530 | 1 | 100 | 1 | - | N600 | 8MB | 64KB | 64MB | K26RT-N (SDK5.110) | Important:Please Read <[[https://www.linksysinfo.org/index.php?threads/w-i-p-wndr3400v2-development.77559/post-337553|Flashing Instructions]]> |+| Netgear WNDR3400 | v2/v3 | MIPS-R2 | 530 | 1 | 100 | 1 | - | N600 | 8MB | 64KB | 64MB | K26RT-N (SDK5.110) | [[https://www.linksysinfo.org/index.php?threads/w-i-p-wndr3400v2-development.77559/post-337553|See this forum thread for details.]] |
 | Netgear WNDR3700 | v3 | MIPS-R2 | 480 | 1 | 1000 | 1 | - | N600 | 8MB | 64KB | 64MB | K26RT-N (SDK5.110) | Supported from 2020.6. | | Netgear WNDR3700 | v3 | MIPS-R2 | 480 | 1 | 1000 | 1 | - | N600 | 8MB | 64KB | 64MB | K26RT-N (SDK5.110) | Supported from 2020.6. |
 | Netgear WNDR4000 |   | MIPS-R2 | 480 | 1 | 1000 | 1 |   | N750 | 8MB | 64KB | 64MB | K26RT-N (SDK5.110) | Supported from 2020.6. | | Netgear WNDR4000 |   | MIPS-R2 | 480 | 1 | 1000 | 1 |   | N750 | 8MB | 64KB | 64MB | K26RT-N (SDK5.110) | Supported from 2020.6. |
Line 121: Line 121:
 | Tenda N80 |   | MIPS-R2 | 500 | 1 | 1000 | 1 | - | N900 | 8MB | FIXME | 128MB | K26RT-N (SDK5.110) |   | | Tenda N80 |   | MIPS-R2 | 500 | 1 | 1000 | 1 | - | N900 | 8MB | FIXME | 128MB | K26RT-N (SDK5.110) |   |
 | Tenda W1800R |   | MIPS-R2 | 600 | 1 | 1000 | 2 | - | AC1750 | 16MB | FIXME | 256MB | K26RT-AC (SDK6.30) |   | | Tenda W1800R |   | MIPS-R2 | 600 | 1 | 1000 | 2 | - | AC1750 | 16MB | FIXME | 256MB | K26RT-AC (SDK6.30) |   |
-| Xiaomi Mi R1D |   | ARM | 1000 | 2 | 1000 | 1 | - | AC1200 | 128MB | 64KB | 256MB | K26ARM (SDK6.37) | **IMPORTANT :** This unit may be  bricked if you attempt to FULLY erase NVRAM. Resetting values to defaults works safely. To access the CFE when you have the stock xVortex CFE, you must power on the unit while holding the Reset button for 10 seconds. [[https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1139833#1139833|Details]] \\   \\ Please use the images with ending "…-Custom-64K.trx"\\ \\ (wl0 is the 5 GHz radio). |+| Xiaomi Mi R1D |   | ARM | 1000 | 2 | 1000 | 1 | - | AC1200 | 128MB | 64KB | 256MB | K26ARM (SDK6.37) | This unit may be  bricked if you try to FULLY erase NVRAM. Resetting values to defaults works safely. To access the CFE when you have the stock xVortex CFE, power on the unit while holding the Reset button for 10 seconds. \\ [[https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1139833#1139833|See this forum thread for details.]] \\   \\ Use images with ending "…-Custom-64K.trx"\\ \\ (wl0 is the 5 GHz radio). |
 | ZTE ZXV10 H618B |   | MIPS-R1 | 240 | 1 | 100 | 1 | - | G54 | 16MB | FIXME | 32MB | K26 (SDK5.10) |   | | ZTE ZXV10 H618B |   | MIPS-R1 | 240 | 1 | 100 | 1 | - | G54 | 16MB | FIXME | 32MB | K26 (SDK5.10) |   |
 | ZTE H218N |   | MIPS-R2 | 500 | 1 | 1000 | 1 | - | N300 | 16MB | FIXME | 64MB | K26RT-N (SDK5.110) |   | | ZTE H218N |   | MIPS-R2 | 500 | 1 | 1000 | 1 | - | N300 | 16MB | FIXME | 64MB | K26RT-N (SDK5.110) |   |
hardware_compatibility.1710747115.txt.gz · Last modified: 2024/03/18 07:31 by m_ars

Page Tools

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki