FreshTomato Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== IP Traffic - Last 24 Hours ======

The IP Traffic - Last 24 Hours menu displays bandwidth used on //selected //network IP addresses/ranges during the last 24 hours. Do not confuse this with the //Bandwidth///[[:bwm-24|Last 24 Hours]] function.

 \\ \\ {{:299c6bc71fedfa913c910bf4f8e2a4ab.png?774}}  \\

 \\ **IPs currently on graphic:** allows you to select from which IP addresses/ranges you want to display bandwidth data.

 \\

**Hidden Addresses:** lets you select IP addresses whose bandwidth currently isn't displayed to be measured/graphed.

The graph has a 24-hour window with 2-minute interval. A maximum of 24 hours of data display, refreshed at most every 2 minutes.

 \\

**RX** numbers show incoming bandwidth (to the LAN).

 \\

**TX** numbers show outgoing bandwidth (to the WAN).

 \\

**Hours: **

 \\

**Avg:**  applies a percentile to the image. It shows how a data point compares to the total distribution over time.

 \\

**Max:**

  * uniform - choosing this scales graphs to the maximum value recorded on all interfaces.
  * per If (Per Interface) - choosing this scales graphs based on data from one interface only.

 \\

**Unit: **

  * kbit/KB - this toggles between displaying volume in kilobits/Kilobytes (1,000). 
  * Mbit/MB - this toggles the display to volume to be expressed in megabits/Megabytes (1,000,000).

 \\

**Display: **

  * Solid - choosing this graphs bandwidth usage with a solid area.
  * Line - graphs bandwidth using a single line to represent maximum values.

 \\

**Color:**  switches between various pre-specified color schemes for the graph.

**[reverse]:**  reverses the graph's color scheme. For example, a device traced in blue is traced in orange and vice versa.

 \\

**Configure:** clicking this takes you to [[admin-iptraffic|IP Traffic Monitoring]]. There, you can enable/disable IP Traffic monitoring, and configure settings.

 \\


==== General Features ====

//Cursor-Tracking Readout: //Bandwidth graphs feature a a //Cursor-Tracking Readout//.

When you mouse over the graph, the graph displays the following at the top right corner:

  * Day of Week
  * Time
  * Bandwidth usage.

 \\

These update as you move your mouse.

The Cursor-Tracking Readout disappears after 5 intervals: that is, 10 seconds in //Real-Time//, 10 minutes in //Last 24 Hours//, and so on.

 \\

//Mouse-Click Readout//: Bandwidth graphs also have a Mouse-Click Readout: If you click on the graph, the date/time/bandwidth numbers display beside the mouse cursor. This readout is static. It does not update with graph movement or scaling.

 \\

 \\
FreshTomato Wiki

User Tools

Site Tools

Page Tools
