Differences

This shows you the differences between two versions of the page.

--- ipt-realtime [2024/09/25 19:31] – -Condense, delete screenshot from original location hogwild
+++ ipt-realtime [2024/11/06 22:50] (current) – [IP Traffic - Real-time] -Punctuation hogwild
@@ Line 3: / Line 3: @@
 The IP Traffic - Real-Time menu displays real-time bandwidth being used on //selected network IP addresses/ranges//.
-IP Traffic Monitoring is similar to Bandwidth Monitoring, but it categorizes the data by individual LAN IP address. Do not confuse this with the //Bandwidth///[[:bwm-realtime|Real-Time]] function, which collects bandwidth usage based on //a specific FreshTomato interface//.
+ \\
- \\ \\   \\  {{:0065c1e1ed0bb25d5a8b555cfbd582b8.png?774}}]]
+IP Traffic Monitoring is similar to Bandwidth Monitoring, but it categorizes the data by individual //LAN IP address//.
- \\ \\ **IPs currently on graphic:** This lets you select the IP addresses/ranges whose bandwidth data you wish to display.
+Don't confuse it with the ///Bandwidth///[[:bwm-realtime|Real-Time]] function. That tracks bandwidth usage based on //specific FreshTomato interfaces//.
-**Hidden Addresses:** Here, select IP addresses whose bandwidth is currently not displayed to be measured/graphed.
+ \\ \\   \\ {{:0065c1e1ed0bb25d5a8b555cfbd582b8.png?774}}
-The graph has a 10-minute window, with a 2-second interval. It displays a maximum of 10 minutes of data, refreshed a maximum of every 2 seconds.
+ \\
+The graph has: a 10-minute window and 2-second interval.
+It displays a maximum of 10 minutes of data, refreshed a maximum of every 2 seconds.
+ \\ \\ **IPs currently on graphic:** lets you select the IP addresses/ranges whose bandwidth data to display.
  \\
-**RX** numbers show incoming bandwidth (to the LAN).
+**Hidden Addresses:** select IP addresses whose bandwidth isn't displayed to be measured/graphed.
-**TX** numbers show outgoing bandwidth (to the WAN).
+ \\ \\ **RX:**  numbers show incoming bandwidth (to the LAN).
- \\ **Hours:**
+ \\
-**Avg:**  This applies a percentile to the image. This shows how a data point compares to the total distribution over time.
+**TX:**  numbers show outgoing bandwidth (to the WAN).
+ \\
+**Hours: TBD.**
+ \\
+**Avg:**  Applies a percentile to the image to show how a data point compares to the total distribution over time.
+ \\
 **Max:**
-  * Uniform - Choosing this scales graphs to the maximum value recorded on all interfaces.
+  * Uniform - scales graphs to the maximum value recorded on all interfaces.
-  * Per If (Per Interface) - Choosing this scales graphs based on data from one interface only.
+  * Per If (Per Interface) - scales graphs based on data from one interface only.
+ \\
 **Unit: **
-  * kbit/KB - This toggles between displaying volume in kilobits/Kilobytes (1,000).
+  * kbit/KB - toggles between displaying volume in kilobits/Kilobytes.
-  * Mbit/MB - This toggles the display to volume to be expressed in megabits/Megabytes (1,000,000).
+  * Mbit/MB - toggles the display volume to be expressed in megabits/Megabytes.
+ \\
 **Display: **
-  * Solid - Choosing this graphs bandwidth usage with a solid area.
+  * Solid - graphs bandwidth usage with a solid area.
-  * Line - Choosing this graphs bandwidth using a single line representing maximum values.
+  * Line - graphs bandwidth using a single line representing maximum values.
-**Color:**  This switches between various pre-specified color schemes for the graph.
+ \\
-**[reverse]:** Reverses the graph's color scheme. For example, a device traced in blue is traced in orange and vice versa.
+**Color:**  switches between various pre-specified color schemes for the graph.
  \\
-%%>>%% Configure: Takes you to the //Administration///[[admin-iptraffic|IP Traffic Monitoring]] menu.
+[reverse]: Reverses the graph's color scheme.
-There, you can enable/disable IP Traffic monitoring, and configure settings.
+A device traced in blue would be traced in orange and vice versa.
  \\
-//Cursor-Tracking Readout: //Bandwidth graphs feature a a //Cursor-Tracking Readout//.
+%%>>%% Configure: Takes you to the ///Administration///[[admin-iptraffic|IP Traffic Monitoring]] menu. There, you can \\ enable/disable IP Traffic monitoring, and configure settings.
-When you mouse over the graph, the graph displays the following at the top right corner:
+ \\
+==== General Features ====
+//Cursor-Tracking Readout//
+Bandwidth graphs feature a a //Cursor-Tracking Readout//.
+When you move your mouse over the graph, the graph displays at the top right corner:
+ \\
   * Day of Week
@@ Line 64: / Line 95: @@
 The Cursor-Tracking Readout disappears after 5 intervals: that is, 10 seconds in //Real-Time//, 10 minutes in //Last 24 Hours//, and so on.
- \\ //Mouse-Click Readout//: Bandwidth graphs also have a //Mouse-Click Readout//: Clicking on the graph makes the date/time/bandwidth numbers display beside the mouse cursor. The readout is static. It does not update with graph movement or scaling.
+ \\ //Mouse-Click Readout//:
+Bandwidth graphs have a //Mouse-Click Readout//: If you click on the graph, the date/time/bandwidth numbers display beside the mouse cursor. The readout is static. It does not update with graph movement or scaling.
  \\

FreshTomato Wiki

User Tools

Site Tools

Differences

Page Tools