FreshTomato Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== IP Traffic - Real-time ======

The IP Traffic - Real-Time menu displays real-time bandwidth being used on //selected network IP addresses/ranges//.

 \\

IP Traffic Monitoring is similar to Bandwidth Monitoring, but it categorizes the data by individual //LAN IP address//.

Don't confuse it with the ///Bandwidth///[[:bwm-realtime|Real-Time]] function. That tracks bandwidth usage based on //specific FreshTomato interfaces//.

 \\ \\   \\ {{:0065c1e1ed0bb25d5a8b555cfbd582b8.png?774}}

 \\

The graph has: a 10-minute window and 2-second interval.

It displays a maximum of 10 minutes of data, refreshed a maximum of every 2 seconds.

 \\ \\ **IPs currently on graphic:** lets you select the IP addresses/ranges whose bandwidth data to display.

 \\

**Hidden Addresses:** select IP addresses whose bandwidth isn't displayed to be measured/graphed.

 \\ \\ **RX:**  numbers show incoming bandwidth (to the LAN).

 \\

**TX:**  numbers show outgoing bandwidth (to the WAN).

 \\

**Hours: TBD.**

 \\

**Avg:**  Applies a percentile to the image to show how a data point compares to the total distribution over time.

 \\

**Max:**

  * Uniform - scales graphs to the maximum value recorded on all interfaces.
  * Per If (Per Interface) - scales graphs based on data from one interface only.

 \\

**Unit: **

  * kbit/KB - toggles between displaying volume in kilobits/Kilobytes. 
  * Mbit/MB - toggles the display volume to be expressed in megabits/Megabytes.

 \\

**Display: **

  * Solid - graphs bandwidth usage with a solid area.
  * Line - graphs bandwidth using a single line representing maximum values.

 \\

**Color:**  switches between various pre-specified color schemes for the graph.

 \\

[reverse]: Reverses the graph's color scheme.

A device traced in blue would be traced in orange and vice versa.

 \\

%%>>%% Configure: Takes you to the ///Administration///[[admin-iptraffic|IP Traffic Monitoring]] menu. There, you can \\ enable/disable IP Traffic monitoring, and configure settings.

 \\


==== General Features ====

//Cursor-Tracking Readout//

Bandwidth graphs feature a a //Cursor-Tracking Readout//.

When you move your mouse over the graph, the graph displays at the top right corner:

 \\

  * Day of Week
  * Time
  * Bandwidth usage.

 \\

These data update as you move your mouse.

The Cursor-Tracking Readout disappears after 5 intervals: that is, 10 seconds in //Real-Time//, 10 minutes in //Last 24 Hours//, and so on.

 \\ //Mouse-Click Readout//:

Bandwidth graphs have a //Mouse-Click Readout//: If you click on the graph, the date/time/bandwidth numbers display beside the mouse cursor. The readout is static. It does not update with graph movement or scaling.

 \\

 \\
FreshTomato Wiki

User Tools

Site Tools

Page Tools
