Differences

This shows you the differences between two versions of the page.

--- media_bridge [2023/09/11 21:57] – [Wireless Mode and Settings] hogwild
+++ media_bridge [2023/09/11 22:12] – [LAN Settings] -add Notes and Troubleshooting section, formatting, condense hogwild
@@ Line 24: / Line 24: @@
 ==== LAN Settings ====
-In the Network menu, in the LAN Settings section:
+Still in the Network menu, in the LAN Settings section:
   * Configure bridge "br0" with an IP Address within the LAN you want to connect to. (For example: 192.168.1.50).
   * Configure an appropriate Default Gateway. In our example: 192.168.1.1 (assuming main router has address: 192.168.1.1).
   * Enter a Static DNS value of: 192.168.1.1 (assuming your main router has address: 192.168.1.1).
-  * Starting with **release 2022.6**, you can select the “Automatic IP” option and your router should obtain the IP/Gateway/DNS via DHCP.
+  * Since release 2022.6, if you select “Automatic IP”, your router should obtain the IP/Gateway/DNS via DHCP.
- \\  Some advantages of media bridge (MB) mode compared to wireless Ethernet bridge mode include:
+ \\  Media Bridge (MB) mode has several advantages over wireless Ethernet bridge mode:
-  * MB mode will work with SDK7 ARM routers like the AC3200 / R8000 (wireless Ethernet bridge is not working/not possible).
+  * MB mode will work with SDK7 ARM routers like the AC3200 / R8000  \\ (wireless Ethernet bridge mode is impossible).
-  * MB mode will work with SDK6 MIPS routers like the Asus RT-AC66U, D‑Link DIR‑865L, (wireless Ethernet bridge mode is not working/not possible).
+  * MB mode will work with SDK6 MIPS routers like the Asus RT-AC66U, D‑Link DIR‑865L,  \\ (wireless Ethernet bridge mode is impossible).
-  * MB mode will work with SDK6 arm routers like Asus RT-AC68U, Netgear R7000. (wireless Ethernet bridge mode is also possible).
+  * MB mode will work with SDK6 ARM routers like Asus RT-AC68U, and Netgear R7000. (wireless Ethernet bridge mode is also possible).
-  * IPv4 and IPv6 communication will work (wireless Ethernet bridge allows only IPv4. An except is SDK6 ARM dual-core will allow IPv6).
+  * IPv4 and IPv6 communication will work \\ (wireless Ethernet bridge allows only IPv4, except SDK6 ARM dual-core models, which will allow IPv6).
-\\  Note: It is advised to refrain from using 'virtual interfaces' when in Media Bridge mode.
+\\ You are strongly advised NOT to use Virtual Interfaces, such as Virtual Wireless networks or VLANs when in Media Bridge mode.
-**__In case of possible issues (like "Losing Connectivity"):__**
+===== Media Bridge Notes and Troubleshooting =====
-) Please try to lower the Wireless Client connection check time (affects Media Bridge Mode, Wireless Client Mode and Wireless Ethernet Bridge Mode).
+==== Troubleshooting ====
-Currently we have the check every 30 sec (default). The FT user can adjust the check value manually, for example set it to 15 sec (see below).
+**In case of possible issues (like "Losing Connectivity"):**
+) Try loweringthe Wireless Client connection check time (affects Media Bridge Mode, Wireless Client Mode and Wireless Ethernet Bridge Mode).
+Currently the default setting is to check every 30 seconds. You can adjust this check value to, say, 15 seconds (see below).
+ \\
 <code ->
@@ Line 51: / Line 57: @@
 root@FreshTomato-WlClientMode:/tmp/home/root# reboot
 </code>
+ \\
 ) Additional [[https://bitbucket.org/pedro311/freshtomato-arm/commits/b84a931985a3f739a1dda83ec9fc824a278f8fdf|improvement]] - upgrade to FreshTomato 2023.4 (and newer)
+ \\
+ \\

FreshTomato Wiki

User Tools

Site Tools

Differences

Page Tools