Differences

This shows you the differences between two versions of the page.

--- nas-usb [2023/06/04 23:41] – [USB Support] hogwild
+++ nas-usb [2023/08/09 15:45] – [USB Support Notes] -condense hogwild
@@ Line 9: / Line 9: @@
   * USB 3.0 Support - Checking this enables USB 3.x (xHCI) operation on USB 3.0 (or higher) ports. (Default: )
   * USB 2.0 Support - Checking this enables USB 2.0 (EHCI) operation. (Default: )
-  * USB 1.1 Support: Checking an option enables support for the that mode of USB 1.1 operation. (Default: Disabled).
+  * USB 1.1 Support: Checking an option enables support for that mode of USB 1.1 operation. (Default: Disabled).
-    * (OHCI) -enables operation on USB 1.x (or higher) USB ports.
+    * (OHCI) - enables operation on USB 1.x (or higher) USB ports.
     * (UHCI) - enables operation on USB 2.x (or higher) USB ports.
@@ Line 59: / Line 59: @@
 Therefore, before changing any USB filesystem settings, you should first reconfigure syslog to be stored (temporarily) in RAM. Only then should you adjust filesystem settings or unmount the drive. Afterwards, you can configure syslog to again be permanently stored on USB storage, where it shouldn't be interrupted.
-**USB filesystem corruption is a very common cause of system instability.** You could experience a VPN connectivity issue, WiFi instability or any other seemingly "random" problem directly or indirectly caused by USB filesystem issues. Remember this when troubleshooting router issues. It is advised that you add USB filesystem checks to your troubleshooting checklist.
+**USB filesystem corruption is a very common cause of system instability.** You could experience a VPN connectivity issue, WiFi instability or any other seemingly "random" problem directly or indirectly caused by USB filesystem issues. When troubleshooting, you are advised to add USB filesystem checks to your troubleshooting checklist.
  \\

FreshTomato Wiki

User Tools

Site Tools

Differences

Page Tools