Site Tools


real-time

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
real-time [2021/04/11 00:35]
hogwild
real-time [2021/09/23 20:56] (current)
djk44883 footnote: data reset on reloads (no data to reset on first load)
Line 1: Line 1:
 ====== Real-Time ====== ====== Real-Time ======
  
-Real-time bandwidth provides live monitoring of any router interface in graph form. Generally, users will want to monitor the WAN interface (vlan2 in most cases). Data are reset when the page first loads, and the display draws gradually. The maximum display window is 10 minutes, and data resolution is 2 seconds. That means 10 minutes of data can be displayed at a time, and that data can be sampled every 2 seconds, at most. Only one interface at at a time can be displayed. Clicking on the interface name in any square will display the bandwidth of that interface.+Real-time bandwidth provides live monitoring of any router interface in graph form. Generally, users will want to monitor the WAN interface (vlan2 in most cases). Data are reset when the page first loads(( 
 +Although there is not data to "reset" when page first loads, it is reset on each subsequent [re]loads 
 +)), and the display draws gradually. The maximum display window is 10 minutes, and data resolution is 2 seconds. That means 10 minutes of data can be displayed at a time, and that data can be sampled every 2 seconds, at most. Only one interface at at a time can be displayed. Clicking on the interface name in any square will display the bandwidth of that interface.
  
-\\ +\\  **Avg.** Applies a percentile to the display. This can show how a data point compares to the total distribution (graph) over time.\\  **Max:** Choosing **Uniform** scales graphs to the maximum value recorded on all interfaces. Choosing **Per If** (Per Interface) scales graphs based on data from one interface only.\\  **Unit: kbit/KB, Mbit/MB** - toggles between displaying volume in kilobits/Kilobytes (1,000) or megabits/Megabytes (1,000,000).\\  **Display: **Choosing **Solid** graphs bandwidth usage with a solid area, choosing **Line** graphs bandwidth with a single line representing maximum values.\\  **Color**: Switch between different, pre-specified color schemes for the graph.
-**Avg.** Applies a percentile to the display. This can show how a data point compares to the total distribution (graph) over time.\\ +
-**Max:** Choosing **Uniform** scales graphs to the maximum value recorded on all interfaces. Choosing **Per If** (Per Interface) scales graphs based on data from one interface only.\\ +
-**Unit: kbit/KB, Mbit/MB** - toggles between displaying volume in kilobits/Kilobytes (1,000) or megabits/Megabytes (1,000,000).\\ +
-**Display: **Choosing **Solid** graphs bandwidth usage with a solid area, choosing **Line** graphs bandwidth with a single line representing maximum values.\\ +
-**Color**: Switch between different, pre-specified color schemes for the graph.+
  
-//**[reverse]** //: Reverses the graph's color scheme. For example, a device traced in blue is traced in orange and a device traced in orange is traced in blue.\\ +//**[reverse]** //: Reverses the graph's color scheme. For example, a device traced in blue is traced in orange and a device traced in orange is traced in blue.\\  \\  \\  [[https://wiki.freshtomato.org/lib/exe/detail.php?id=real-time&media=pasted:20200520-162850.png|{{:pasted:20200520-162850.png}}]]
-\\ +
-\\ +
-[[https://wiki.freshtomato.org/lib/exe/detail.php?id=real-time&media=pasted:20200520-162850.png|{{:pasted:20200520-162850.png}}]]+
  
-//Cursor-Tracking Readout: //Bandwidth graphs feature a a //Cursor-Tracking Readout//. When you move\\ +//Cursor-Tracking Readout: //Bandwidth graphs feature a a //Cursor-Tracking Readout//. When you move\\  your mouse cursor over the graph, the graph displays the following at the top right corner: Day of Week,\\  Time, and Bandwidth usage. These update when you move the mouse.
-your mouse cursor over the graph, the graph displays the following at the top right corner: Day of Week,\\ +
-Time, and Bandwidth usage. These update when you move the mouse.+
  
-The Cursor-Tracking Readout disappears after 5 intervals: that is, 10 seconds in //Real-Time//,\\ +The Cursor-Tracking Readout disappears after 5 intervals: that is, 10 seconds in //Real-Time//,\\  10 minutes in //Last 24 Hours//, etcetera.
-10 minutes in //Last 24 Hours//, etcetera.+
  
-//Mouse-Click readout//: Bandwidth graphs also feature a //Mouse-Click readout//: If you click on the graph,\\ +//Mouse-Click readout//: Bandwidth graphs also feature a //Mouse-Click readout//: If you click on the graph,\\  the date/time/bandwidth numbers will display beside the mouse cursor.
-the date/time/bandwidth numbers will display beside the mouse cursor.+
  
 Note: Mouse-click readout is static-it does not update with graph movement or scaling. Note: Mouse-click readout is static-it does not update with graph movement or scaling.
  
  
real-time.txt · Last modified: 2021/09/23 20:56 by djk44883