Site Tools


router_to_router_ssh

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
Next revisionBoth sides next revision
router_to_router_ssh [2021/09/22 01:44] – [Example] hogwildrouter_to_router_ssh [2021/09/22 05:44] – [Example] hogwild
Line 37: Line 37:
   - And here is the status display after the command is run.   - And here is the status display after the command is run.
  
-{{:pasted:20210921-152637.png}} \\  \\ If the same command is repeated, eth1 will be disabled on the primary router.+{{:pasted:20210921-152637.png}} \\  \\ If the same command is repeated, the eth1 interface will be disabled on the primary router. 
  
 ===== Notes ===== ===== Notes =====
  
   * SSH must be enabled on both routers.   * SSH must be enabled on both routers.
-  * The key generated is erase after a reboot of the primary router. Either keep a copy of the id_dropbear file offline (on a flash drive, or CIFS Client share) for restoration, or be prepared to repeat the procedure (“**HOWTO**” steps 1 and 2) after a reboot [removing any redundant key from the secondary router during the process]\\ This guide was produced using [[https://www.chiark.greenend.org.uk/~sgtatham/putty/|PuTTY]] [v0.76and FreshTomato v2021.5. \\ Insiration was provided by [[https://blog.michael.franzl.name/2017/09/03/set-passwordless-ssh-login-dropbear-client/|this]] article [and this process was first documented [[https://www.linksysinfo.org/index.php?threads/%E2%80%9Cpassword-less%E2%80%9D-router-to-router-ssh-how-to.76761/|here]]].+  * The key generated will be erased after a reboot of the primary router. Either keep a copy of the "id_dropbearfile offline (on a flash drive, or CIFS Client share) for restoration, or be prepared to repeat the procedure (HOWTO steps 1 and 2) after a rebootremoving any redundant key from the secondary router during the process. 
 +  * This guide was produced using [[https://www.chiark.greenend.org.uk/~sgtatham/putty/|PuTTY]] v0.76 and FreshTomato release 2021.5. 
 +  * Inspiration was provided by [[https://blog.michael.franzl.name/2017/09/03/set-passwordless-ssh-login-dropbear-client/|this]] article.  
 +  * The process was first documented [[https://www.linksysinfo.org/index.php?threads/%E2%80%9Cpassword-less%E2%80%9D-router-to-router-ssh-how-to.76761/|here]].
  
  
router_to_router_ssh.txt · Last modified: 2023/05/24 02:08 by hogwild