Site Tools


speedtest

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
speedtest [2023/05/07 03:38] – [Speedtest from the Command Line Interface]-grammar, clarity hogwildspeedtest [2024/03/23 20:48] (current) – Changed Head to "Run a Speedtest..." hogwild
Line 1: Line 1:
-====== Speedtest from the Command Line Interface ======+====== Run a Speedtest from the Command Line Interface ======
  
-Typically, you test connection speed by visiting sites like speedtest.net or fast.com. However, there might be situations when you need to test the FreshTomato device remotely or you just want to test from the command line instead of via the Web interface.+Typically, you test connection speed by visiting sites like speedtest.net or fast.com. However, situations may arise when you need to test the FreshTomato device remotely or you just want to test from the command line instead of via the Web interface.
  
 +===== Downloading speedtest cli =====
 +
 +  * Visit speedtest.net and look for the Linux/cli version. At the time this was written, the URL was: [[https://www.speedtest.net/apps/cli]] 
 +  * The latest version was 1.2.0. Therefore, this HOWTO refers to that version.
 +  * Download the relevant file for your router (ARM device will need **armel** builds).
 +
 +For example, at a command line, download the file:
 +
 + \\ ''cd /mnt/USB wget ookla-speedtest-1.2.0-linux-armel.tgz''
 +
 + \\
 +
 + Then, extract the archive:
  
-===== downloading speedtest cli ===== 
-  * Visit speedtest.net and look for the linuc/cli version. At the time this document was written the URL points to: https://www.speedtest.net/apps/cli and the latest versio nis 1.2.0 so this HOWTO refers to such file/version. 
-  * Download the relevant file for your router (ARM device will need **armel** builds) e.g.  
-''cd /mnt/USB 
-wget ookla-speedtest-1.2.0-linux-armel.tgz'' 
-  * Extract the archive, e.g.  
 ''tar zxvf ookla-speedtest-1.2.0-linux-armel.tgz'' ''tar zxvf ookla-speedtest-1.2.0-linux-armel.tgz''
-  * make the file executable+ 
 + \\ 
 + 
 +Now, make the file executable
 ''chmod +x ./speedtest'' ''chmod +x ./speedtest''
 +
 + \\ \\
  
 ===== Executing the test ===== ===== Executing the test =====
-The very first time you will ask to type YES to accept the terms and conditions:+ 
 + \\ 
 + 
 +The very first time you run speedtest, it will prompt you to confirm (type YES) that you accept the Terms and Conditions: 
 + 
 + \\
  
 <code -> <code ->
Line 46: Line 64:
       Upload:    25.25 Mbps (data used: 42.5 MB)       Upload:    25.25 Mbps (data used: 42.5 MB)
                  75.72 ms   (jitter: 18.90ms, low: 25.09ms, high: 207.16ms)                  75.72 ms   (jitter: 18.90ms, low: 25.09ms, high: 207.16ms)
- Packet Loss: Not available.</code>+ Packet Loss: Not available. 
 +</code> 
 + 
 + \\ 
 + 
 + \\ 
 + 
 + \\ \\ 
 + 
speedtest.1683427131.txt.gz · Last modified: 2023/05/07 03:38 by hogwild