FreshTomato Wiki

User Tools

Site Tools

Trace:
toggle_radio

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
Last revisionBoth sides next revision
toggle_radio [2023/08/06 21:44] – [WiFi SSID-specific operation] -formatting hogwildtoggle_radio [2023/08/06 21:48] – [WiFi SSID-specific operation] hogwild
Line 27: Line 27:
 ===== Specific Wireless chipset (2.4/5GHz) operations ===== ===== Specific Wireless chipset (2.4/5GHz) operations =====
  
-Modern routers come with two or more chipsets/WiFi interfaces. There is usually one 2.4GHz interface and one or more 5GHz interfaces. In certain case you might want to enable/disable a specific chipset via the command line.+Modern routers come with two or more chipsets/WiFi interfaces. There is usually one 2.4GHz interface and one or more 5GHz interfaces. In certain cases you might want to control a specific chipset via the command line.
  
 Once you've identified the name of the appropriate radio interface (via the [[advanced-wlanvifs|Virtual Wireless]] page): Once you've identified the name of the appropriate radio interface (via the [[advanced-wlanvifs|Virtual Wireless]] page):
Line 39: Line 39:
 \\ \\
  
-For example, using "eth1" in my the above example:+For example, using "eth1" in the above example:
  
 **Verify interface state** **Verify interface state**
Line 88: Line 88:
  \\  \\
  
-Now, let's assume you want to turn off wl1.3 which is associated to SSID "test"+Now, let's assume you want to control "wl1.3" which is associated to the SSID: "test"
  
  \\ \\ {{:pasted:20221127-162109.png}}  \\ \\ {{:pasted:20221127-162109.png}}
Line 96: Line 96:
  \\  \\
  
-We could perform the following tasks:\\+You could perform the following tasks:\\
  
 **Toggle interface state**\\ **Toggle interface state**\\
Line 123: Line 123:
  
  
-==== Wireless SSID specific operation ====+==== Wireless SSID-specific operation ====
  
-Let's say, as it often happens), a specific SSID you have defined is operational on multiple interfaces/sub-interfaces, you can disable the SSID everywhere as follow:\\+Often, a specific defined SSID operates on multiple interfaces/sub-interfaces. 
 + 
 +You can disable that SSID on all interfaces everywhere, as follows:\\ 
 + 
 + \\ 
 + 
 +**Force Off** 
 + 
 + \\ \\  ''SSID=MYCOOLSSID''\\ '' nvram show | grep ssid | grep $SSID | while read line; do wl -i $(echo $line | cut -d"=" -f1 | cut -d_ -f1 ) radio off; done'' 
 + 
 + \\ 
 + 
 + \\ 
 + 
 +**Force On** 
 + 
 + \\ \\  ''SSID=MYCOOLSSID''\\ '' nvram show | grep ssid | grep $SSID | while read line; do wl -i $(echo $line | cut -d"=" -f1 | cut -d_ -f1 ) radio on; done'' 
 + 
 + \\ 
 + 
 + \\ 
 + 
 + \\
  
-**Force Off**\\ 
-''SSID=MYCOOLSSID\\ 
-nvram show | grep ssid | grep $SSID | while read line; do wl -i $(echo $line | cut -d"=" -f1 | cut -d_ -f1 ) radio off; done'' 
  
-**Force On**\\ 
-''SSID=MYCOOLSSID\\ 
-nvram show | grep ssid | grep $SSID | while read line; do wl -i $(echo $line | cut -d"=" -f1 | cut -d_ -f1 ) radio on; done'' 
toggle_radio.txt · Last modified: 2023/08/06 21:49 by hogwild

Page Tools

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki