Differences

This shows you the differences between two versions of the page.

--- toggle_radio [2025/10/19 21:19] – [Specific WiFi SSID Operation] hogwild
+++ toggle_radio [2025/10/19 21:22] (current) – [Control Specific Wireless Chipsets (2.4/5GHz)] hogwild
@@ Line 51: / Line 51: @@
  \\ ''int=eth1''
- \\ '' [ $(wl -i $int radio | grep -Eo [0-1]$) -eq 1 ] && echo "radio $int is off" || echo "radio $int is on"''
+ \\ '' [ $(wl -i $int radio | grep -Eo [0-1]$) -eq 1 ] && echo "radio $int is off" || echo "radio $int is on"'' \\
  \\ \\
 \\ **Toggle interface state:**
@@ Line 135: / Line 135: @@
 **Take down an interface** \\ \\
+''iplink set wl1.3 down'' \\
  \\ \\
-''iplink set wl1.3 down''
- \\
 **Bring up an interface:**
@@ Line 146: / Line 145: @@
  \\
+ \\
 ==== Specific WiFi SSID Operation ====
-Often, a specific defined SSID operates on multiple interfaces/sub-interfaces.
+Often, a specific defined SSID operates on multiple interfaces/sub-interfaces. You can disable that SSID on all interfaces everywhere, as follows:\\
-You can disable that SSID on all interfaces everywhere, as follows:\\
  \\
@@ Line 162: / Line 159: @@
  \\ \\
-**Force On**
+**Force On** \\ \\
- \\ \\  ''SSID=MYCOOLSSID''\\ \\ '' nvram show | grep ssid | grep $SSID | while read line; do wl -i $(echo $line | cut -d"=" -f1 | cut -d_ -f1 ) radio on; done''
+''SSID=MYCOOLSSID'' \\ \\ '' nvram show | grep ssid | grep $SSID | while read line; do wl -i $(echo $line | cut -d"=" -f1 | cut -d_ -f1 ) radio on; done''
  \\
+ \\
  \\
+ \\

FreshTomato Wiki