This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revisionNext revision | Previous revisionNext revisionBoth sides next revision | ||
tools-iperf [2022/02/03 17:05] – formatting hogwild | tools-iperf [2022/02/17 08:12] – [iPerf] rs232 | ||
---|---|---|---|
Line 1: | Line 1: | ||
====== iPerf ====== | ====== iPerf ====== | ||
- | **IPerf** is a tool which allows you to measure and tune network performance. | + | **IPerf** is a tool which allows you to measure and tune network performance. |
- | + | ||
- | IPerf can be run in client mode or server mode. Generally, client mode is used. iPerf requires you to know of a reliable public server with which to use it. Currently, the official IPerf webpage hosts a short list of public iPerf servers: | + | |
- | + | ||
- | [[https:// | + | |
Some iPerf server don't work, so if you receive an error when testing, try a different iPerf server. You can also try unofficial iPerf servers, but their location and availability may often change. Once you've configured the Server address, protocol and port, you can start your tests. You'll probably only use Server mode if you're testing an intranet VPN site. | Some iPerf server don't work, so if you receive an error when testing, try a different iPerf server. You can also try unofficial iPerf servers, but their location and availability may often change. Once you've configured the Server address, protocol and port, you can start your tests. You'll probably only use Server mode if you're testing an intranet VPN site. | ||
+ | |||
+ | [[https:// | ||
**Mode Server/ | **Mode Server/ | ||
Line 13: | Line 11: | ||
**Host address:** This field is only visible in Client mode. Here, you enter the target iPerf server' | **Host address:** This field is only visible in Client mode. Here, you enter the target iPerf server' | ||
- | **Protocol TCP/UDP**: Here you specify the TCP/IP layer 4 protocol to be used for testing. | + | **Protocol TCP/UDP**: Here you specify the protocol to be used for testing. |
**Port**: Here you enter the port to be used for testing (Default: 5201). | **Port**: Here you enter the port to be used for testing (Default: 5201). | ||
- | **Type: **This lets you specify whether testing stops after a specific amount of time (// | + | **Type: **This lets you specify whether testing stops after a specific amount of time (// |
- | \\ [[https:// | + | **Time Limit/Bytes limit** |
+ | |||
+ | \\ | ||
\\ | \\ | ||
- | Unfortunately, | + | ===== iPerf Notes ===== |
+ | |||
+ | Unfortunately, | ||