FreshTomato Wiki

User Tools

Site Tools

Trace: • ipt-graphs • tools-iperf • bwm-daily • adblock_dns_filtering • status-overview • basic-ipv6 • tools-ping • admin-scripts • ipt-realtime • bwm-monthly
tools-iperf

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
tools-iperf [2024/11/06 23:31] – [iPerf Notes] -Add "and Troubleshooting" to subhead hogwildtools-iperf [2024/11/06 23:34] (current) – [iPerf] hogwild
Line 1: Line 1:
 ====== iPerf ====== ====== iPerf ======
  
-**IPerf** is a tool that allows you to measure and tune network performance.  IPerf can be run in client mode or server mode. Generally, client mode is used.+**IPerf** is a tool that lets you measure and tune network performance. IPerf can be run in client or server mode. Generally, client mode is used.
  
  \\  \\
Line 15: Line 15:
  \\  \\
  
-**Mode Server/Client**: Here, you set the mode of operation.+**Mode Server/Client**: here, you set the mode of operation.
  
  \\  \\
  
-**Host address:** In this field (visible only in Client mode, you enter the target iPerf server address.+**Host address:** here, (visible only in Client mode), enter the target iPerf server address.
  
  \\  \\
  
-**Protocol TCP/UDP**: Here, you specify the protocol to be used for testing.+**Protocol TCP/UDP**: here, you specify the protocol to be used for testing.
  
  \\  \\
  
-**Port**: Here, you enter the port to be used for testing (Default: 5201).+**Port**: here, enter the port to be used for testing (Default: 5201).
  
  \\  \\
  
-**Type: **Here, you specify under what conditions testing will stop:+**Type: **here, specify under what conditions testing will stop:
  
-  * Time-limited - Choosing this will make testing stop after a certain time period. +  * Time-limited - choosing this will make testing stop after \\ a certain time period. 
-  * Buffer-limited - Choosing this makes testing stop after a certain amount \\ of data has been transferred.+  * Buffer-limited - choosing this makes testing stop after \\ a certain amount \\ of data has been transferred.
  
  \\  \\
  
-**Time Limit/Bytes limit** - Here, enter the the units used for the limit type you selected in the //Type// setting. +**Time Limit/Bytes limit:** here, enter the units used for the limit type selected in the //Type// setting.
- +
- \\ +
- +
- \\+
  
  
tools-iperf.1730935902.txt.gz · Last modified: 2024/11/06 23:31 by hogwild

Page Tools

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki