Site Tools


tools-wol

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
tools-wol [2022/02/21 18:41] – -spelling change to WoL hogwildtools-wol [2023/08/05 18:32] (current) – [Wake on LAN] -fix incorrect link hogwild
Line 1: Line 1:
-====== WoL ======+====== Wake on LAN ======
  
-The **WoL** menu allows you to send Wake-on-Lan (aka "Magic"packets to your wired client devices to power them on.+This function allows you send Wake-on-LAN signal (or "magic packet") to wired network devices to wake them or power them on.  Wake on LAN is generally not supported by wireless devices.
  
- \\+The list of devices on this menu includes:
  
-Client devices must be configured to respond to WoL packets for this to workFor PC to wake up from a WoL packet, it must have its WoL firmware setting enabledBefore testing WoL events scheduled in FreshTomato, ensure your PC has the appropriate UEFI/BIOS menu setting enabled to recognize Wake-on-LAN packets. Most UEFI/BIOS interfaces have a Wake-On-LAN option named something like:+  * Devices already active in the ARP table. 
 +  * Devices defined in static DHCP assignment. 
 +  * Devices defined manually in the //Dnsmaq Custom configuration//  field in the [[advanced-dhcpdns|DHCP/DNS/TFTP]] menu. \\ For example: ''dhcp-host=70:EE:50:37:E8:46,myhostnamein''
  
-  * Power on by PCI-E or PCI   (Asus UEFI)  + \\ Some devices might appear on this menu without their hostname defined/displayed. You can work around this by defining them manually in the //Dnsmasq Custom configuration//  field, as described above.
-  * PME Event Wakeup          (AWARD BIOS)  +
-  * Power on by PCI devices     (AMI BIOS)+
  
- \\+\\ There are two ways to send a magic packet to a device on your network:
  
-WoL settings in the PC's operating system also must be enabledFor detailssee: \\ [[https://www.howtogeek.com/70374/how-to-geek-explains-what-is-wake-on-lan-and-how-do-i-enable-it/]]+  - Click anywhere in the list on the device you want to wakeThe **Wake Up** button briefly will grey outthen return.  \\ This indicates a magic packet was just sent to that device's MAC address\\  
 +  Type the desired MAC addresses of the devices to wake into the **MAC Address List** box, and then click **Wake Up**. \\  Note that the **Wake Up** button also serves to save the contents of the **MAC Address List** box to be remembered for future use.
  
-[[https://docs.microsoft.com/en-us/troubleshoot/windows-client/deployment/wake-on-lan-feature]]+ \\ {{:pasted:20200524-104525.png?760}}
  
-[[https://wiki.debian.org/WakeOnLan]]+ \\
  
-Generally, WoL functions assume a client device starts out from an off state, possible on Windows PCs.  If your system is in a suspend or sleep state, it may not recognize the wake signal and therefore may not wake as expected.+ \\
  
- \\\\ The list of devices on this page includes: 
  
-  * Devices already active in the ARP table. +===== Wake on LAN Notes and Troubleshooting =====
-  * Devices defined in a static DHCP assignment. +
-  * Devices defined manually in the //Dnsmaq Custom configuration//  field \\ in the Advanced/DHCP/DNS/menu. \\ For example: ''dhcp-host=70:EE:50:37:E8:46,myhostnamein''+
  
- \\ Some devices might appear on this menuwithout their hostname defined/displayed. You can work around this by defining them manually in the //Dnsmasq Custom configuration//  field, as described above.+Your client device must be configured to respond to magic packetsboth in firmware and in software, for WoL to wake it.  Enabling the firmware option causes the device's Ethernet chip to remain powered on (usually at a low state) even when the device is sleeping/off. This allows it to listen for magic packets.  Enabling the software option allows the device to wake up or power on when that packet is received.
  
- \\ There are two ways to wake up device:+Most PCs have Wake-on-LAN option that must be enabled in the UEFI or BIOS, named something like:
  
-  - Click anywhere on the device you want to wake. After clicking, you should see the words (WAKE UPin the Wake Up button (not the button itselfbriefly turn grey. This indicates a WoL packet was sent to that device's MAC Address. +  * Power on by PCI-E or PCI   (Asus UEFI 
-  - Type the desired MAC Address(esof the devices to be awakened into the "MAC Address list" field, and then click the WAKE UP button. \\  \\+  * PME Event Wakeup          (AWARD BIOS)  
 +  * Power on by PCI devices     (AMI BIOS)
  
-[[https://wiki.freshtomato.org/lib/exe/detail.php?id=wol&media=pasted:20200524-104525.png|{{:pasted:20200524-104525.png}}]]+ \\
  
-===== WOL Notes =====+In terms of software, you must also enable the Wake on LAN settings in your PC operating system.
  
-MAC Addresses in the MAC Address List field are rememberedif you have clicked //Wake Up// at least once after entering them.+For detailssee:
  
- \\+[[https://www.howtogeek.com/70374/how-to-geek-explains-what-is-wake-on-lan-and-how-do-i-enable-it/]] 
 + 
 +[[https://docs.microsoft.com/en-us/troubleshoot/windows-client/deployment/wake-on-lan-feature]] 
 + 
 +[[https://wiki.debian.org/WakeOnLan]]
  
  
tools-wol.1645468865.txt.gz · Last modified: 2022/02/21 18:41 by hogwild