FreshTomato Wiki

User Tools

Site Tools

Trace:
wireless_ethernet_bridge

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revisionBoth sides next revision
wireless_ethernet_bridge [2023/06/06 20:27] – [Steps] hogwildwireless_ethernet_bridge [2023/06/06 20:28] – [Steps] -formatting-add spacing hogwild
Line 29: Line 29:
  \\  \\
  
-  - Configure your PC with a static IP address in the same subnet as the secondary router (e.g., 192.168.1.33).\\  +  - Configure your PC with a static IP address in the same subnet as the secondary router (e.g., 192.168.1.33).\\  \\  
-  - Go to the [[basic-network|Network]] menu//. //In the //IP Address// field in the LAN section, assign an address in the same subnet  \\ as the primary router, but outside the DHCP pool of your network.  We will use 192.168.1.2. \\ Uncheck the DHCP checkbox and click //OK//. Click Save. \\  +  - Go to the [[basic-network|Network]] menu//. //In the //IP Address// field in the LAN section, assign an address in the same subnet  \\ as the primary router, but outside the DHCP pool of your network.  We will use 192.168.1.2. \\ Uncheck the DHCP checkbox and click //OK//. Click Save. \\  \\  
-  - Log on to the secondary router via 192.168.1.2. In the [[basic-network|Network]] menu//, //configure the settings of the interface that  \\ matches  the primary router WiFi network you want to bridge (2.4GHz or 5GHz) as follows: \\ +  - Log on to the secondary router via 192.168.1.2. In the [[basic-network|Network]] menu//, //configure the settings of the interface that  \\ matches  the primary router WiFi network you want to bridge (2.4GHz or 5GHz) as follows: \\  \\ 
     * Set Wireless Mode to: Wireless Ethernet Bridge     * Set Wireless Mode to: Wireless Ethernet Bridge
     * Set Wireless Network Mode to: Auto     * Set Wireless Network Mode to: Auto
Line 42: Line 42:
     * Set Shared Key to: "SharedKey_of_router_to_which_you_want_to_connect"  (the passphrase of the primary router)     * Set Shared Key to: "SharedKey_of_router_to_which_you_want_to_connect"  (the passphrase of the primary router)
     * Set Group Key Renewal to: match the primary router setting (usually 3600 seconds)     * Set Group Key Renewal to: match the primary router setting (usually 3600 seconds)
-    * Click Save. \\ +    * Click Save. \\  \\ 
-  - In the [[basic-network|Network]] menu, in the LAN section: \\ +  - In the [[basic-network|Network]] menu, in the LAN section: \\  \\ 
     * Set Default Gateway to: the IP address of the primary router. We will use 192.168.1.1     * Set Default Gateway to: the IP address of the primary router. We will use 192.168.1.1
     * Set Static DNS to: the primary router's IP address. We will use 192.168.1.1     * Set Static DNS to: the primary router's IP address. We will use 192.168.1.1
wireless_ethernet_bridge.txt · Last modified: 2023/06/18 22:28 by hogwild

Page Tools

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki