FreshTomato Wiki

User Tools

Site Tools

Trace: • admin-scripts
admin-scripts

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
admin-scripts [2023/06/08 06:05] – -resize main screenshot to 729x325 hogwildadmin-scripts [2024/10/24 00:44] (current) – hogwild
Line 1: Line 1:
-===== Scripts =====+====== Scripts ======
  
-The Scripts page allows you to define certain commands to be run upon specific events. These events are predefined. Each event condition has its own tab.  \\+Here, you can define certain commands to be run upon specific events. These events are predefined. Each event condition has its own tab.  \\
  
- \\ \\ **INIT:**  A script entered here is run at boot time, before any connections are established.+ \\ \\ **INIT:**  a script entered here is run at boot time, before any connections are established.
  
-**Halt:**  Commands defined here are called when the device goes through the Shutdown or Reboot process. \\ \\+ \\ 
 + 
 +**Halt:**  commands defined here are called when the device goes through the Shutdown or Reboot process. \\ \\
  
 {{:pasted:20220107-085048.png?729}}  \\   \\ {{:pasted:20220107-085048.png?729}}  \\   \\
  
-**Firewall:**  Often, FreshTomato calls the firewall to restart. This happens after configuration changes or some internal events (such as a change of WAN IP).+**Firewall:**  often, FreshTomato calls the firewall to restart. It happens after configuration changes or some internal events (such as a change of WAN IP).
  
-**WAN Up (Main):**  A script entered here is called every time the primary WAN (re)connects.+ \\
  
-**MultiWan Up:**  A script in this field is run every time a WAN is reconnected. Specifying which WAN will trigger the script is done by passing the "//$1//" parameter in the script.+**WAN Up (Main):**  a script entered here is called every time the primary WAN (re)connects.
  
  \\  \\
  
-{{:pasted:20220107-090632.png}}  \\+**MultiWan Up:**  a script here is run every time a WAN is reconnected. Specifying which WAN triggers the script is done by passing the "//$1//" parameter in the script.
  
-**Word Wrap:** This option wraps text exceeding the line length to the next line, to make it easier to read/edit.+ \\ 
 + 
 +{{:pasted:20220107-090632.png}}  \\  \\ 
 + 
 +**Word Wrap:** wraps text exceeding the line length to the next line, to make it easier to read. 
 + 
 + \\
  
  \\  \\
admin-scripts.1686200739.txt.gz · Last modified: by hogwild

Page Tools

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki