Site Tools


admin-scripts

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
admin-scripts [2023/06/10 01:20] – -change title to Heading level 1 hogwildadmin-scripts [2024/10/24 00:44] (current) hogwild
Line 1: Line 1:
 ====== Scripts ====== ====== Scripts ======
  
-The Scripts page allows you to define certain commands to be run upon specific events. These events are predefined. Each event condition has its own tab.  \\+Here, you can define certain commands to be run upon specific events. These events are predefined. Each event condition has its own tab.  \\
  
- \\ \\ **INIT:**  script entered here is run at boot time, before any connections are established.+ \\ \\ **INIT:**  script entered here is run at boot time, before any connections are established.
  
-**Halt:**  Commands defined here are called when the device goes through the Shutdown or Reboot process. \\ \\+ \\ 
 + 
 +**Halt:**  commands defined here are called when the device goes through the Shutdown or Reboot process. \\ \\
  
 {{:pasted:20220107-085048.png?729}}  \\   \\ {{:pasted:20220107-085048.png?729}}  \\   \\
  
-**Firewall:**  Often, FreshTomato calls the firewall to restart. This happens after configuration changes or some internal events (such as a change of WAN IP).+**Firewall:**  often, FreshTomato calls the firewall to restart. It happens after configuration changes or some internal events (such as a change of WAN IP).
  
-**WAN Up (Main):**  A script entered here is called every time the primary WAN (re)connects.+ \\
  
-**MultiWan Up:**  script in this field is run every time a WAN is reconnected. Specifying which WAN will trigger the script is done by passing the "//$1//" parameter in the script.+**WAN Up (Main):**  a script entered here is called every time the primary WAN (re)connects. 
 + 
 + \\ 
 + 
 +**MultiWan Up:**  script here is run every time a WAN is reconnected. Specifying which WAN triggers the script is done by passing the "//$1//" parameter in the script.
  
  \\  \\
Line 19: Line 25:
 {{:pasted:20220107-090632.png}}  \\  \\ {{:pasted:20220107-090632.png}}  \\  \\
  
-**Word Wrap:** This option wraps text exceeding the line length to the next line, to make it easier to read/edit.+**Word Wrap:** wraps text exceeding the line length to the next line, to make it easier to read. 
 + 
 + \\
  
  \\  \\
admin-scripts.1686356403.txt.gz · Last modified: 2023/06/10 01:20 by hogwild