Differences

This shows you the differences between two versions of the page.

--- admin-scripts [2022/01/07 09:07] – rs232
+++ admin-scripts [2023/08/05 19:19] (current) – hogwild
@@ Line 1: / Line 1: @@
-===== Scripts =====
+====== Scripts ======
-The Scripts page allows you to define certain commands to be run at specific events. These events are predefined, each have its own tab:\\
+The Scripts page allows you to define certain commands to be run upon specific events. These events are predefined. Each event condition has its own tab.  \\
+ \\ \\ **INIT:**  A script entered here is run at boot time, before any connections are established.
+**Halt:**  Commands defined here are called when the device goes through the Shutdown or Reboot process. \\ \\
+{{:pasted:20220107-085048.png?729}}  \\   \\
+**Firewall:**  Often, FreshTomato calls the firewall to restart. This happens after configuration changes or some internal events (such as a change of WAN IP).
+**WAN Up (Main):**  A script entered here is called every time the primary WAN (re)connects.
+**MultiWan Up:**  A script in this field is run every time a WAN is reconnected. Specifying which WAN will trigger the script is done by passing the "//$1//" parameter in the script.
+ \\
+{{:pasted:20220107-090632.png}}  \\  \\
+**Word Wrap:** This option wraps text exceeding the line length to the next line, to make it easier to read.
+ \\
+ \\
-{{:pasted:20220107-085048.png}}\\
-  * **INIT**: This script is run at boot time only before any connection is ever established.\\
-  * **Shutdown**: Commands defined here are called when the device goes through a Shutdown or Reboot process.\\
-  * **Firewall**: Often FreshTomato calls the firewall restart, this happens for a number of reasons but the most common are a configuration changes or certain internal events (e.g. change of WAN IP).\\
-  * **WAN Up (Main)**: This is called every time the WAN connects., in a MultiWAN scenario this is the primary WAN.\\
-  * **MultiWan Up**: This final field run a script every time a WAN is reconnected. Note you can dynamically write your own scripts using $1 to refer to the the MultiWAN interface to affect.\\
-{{:pasted:20220107-090632.png}}\\
-**Word Wrap**: This option wraps text exceeding the line length to simplify editing/readability.

FreshTomato Wiki

User Tools

Site Tools

Differences

Page Tools