Site Tools


advanced-firewall

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
advanced-firewall [2026/11/10 22:31] – [NAT] -Add table summarizing NAT loopback details hogwildadvanced-firewall [2026/11/10 22:42] (current) – [NAT] -Condense, format NAT loopback table contents hogwild
Line 60: Line 60:
  \\  \\
  
-^ Mode ^ Behavior ^ Advantages ^ Disadvantages ^ +^  Mode  ^  Behavior  ^  Advantages  ^  Disadvantages  ^ 
-| **All** | Any LAN traffic sent to the router’s WAN IP is looped back to the router or LAN destination, regardless of whether a port-forward rule exists. | “Just works” for all services, including UPnP-mapped ports and DMZ hosts; no per-port forwarding needed; only mode that supports administering the router via its WAN interface from the LAN. | Adds NAT rule-matching overhead for all LAN-to-WAN-IP traffic, bypasses hardware NAT/cut-through acceleration, and can rarely cause loops or routing instability in dual-router, wireless-bridge, or multi-subnet setups. | +| **All** | Any LAN traffic sent to the router’s WAN IP is looped back to the router or LAN destination, regardless of whether a port-forward rule exists. | “Just works” for all services, including UPnP-mapped ports and DMZ hosts.No per-port forwarding needed.The only mode that supports administering the router via its WAN interface from the LAN. | Adds NAT rule-matching overhead for all LAN-to-WAN-IP traffic.Bypasses hardware NAT/cut-through acceleration. Rarely, can cause loops or routing instability in dual-router, wireless bridge, or multi-subnet setups. | 
-| **Forwarded Only** (default) | Loopback translation applies only to LAN traffic targeting WAN-IP ports that have explicit Port Forwarding rules; other WAN-IP ports are rejected or dropped. | Provides security and control by preventing LAN access to non-forwarded ports; limits loopback processing to only the required ports, improving efficiency. | Does not work for dynamic or non-forwarded services, such as UPnP-opened ports or some DMZ configurations; also cannot access the router admin interface via the WAN IP from the LAN. | +| **Forwarded Only** (default) | Loopback translation applies only to LAN traffic targeting WAN-IP ports that have explicit Port Forwarding rules. Other WAN-IP ports are rejected or dropped. | Provides security and control by preventing LAN access to non-forwarded portsLimits loopback processing to only the required ports, improving efficiency. | Does not work for dynamic or non-forwarded services, such as UPnP-opened ports or some DMZ configurations; also cannot access the router admin interface via the WAN IP from the LAN. | 
-| **Disabled** | No loopback NAT rules are added; LAN traffic destined for the router’s public WAN IP or DDNS name is dropped or rejected. | Lowest router CPU load and maximum throughput because no extra NAT inspection or packet rewriting occurs; enforces clearer network-boundary separation. | LAN devices cannot access local servers through the public domain name/public WAN IP, nor reach the router admin interface via the WAN interface. |+| **Disabled** | No loopback NAT rules are added.LAN traffic destined for the router’s public WAN IP or DDNS name is dropped or rejected. | Creates the lowest CPU load and maximum throughput because no extra NAT inspection or packet rewriting occurs.Enforces clearer network-boundary separation. | LAN devices cannot access local servers through the public domain name/public WAN IP, nor reach the router admin interface via the WAN interface. |
  
 \\ \\
advanced-firewall.1794349893.txt.gz · Last modified: by hogwild